Current openings
Search by industry:
Search by country:
Search by city:
  • Openings
    Location
  • [Finland, Finland ]




    Skills required:
    Required:
    Engineering degree
    Experience in nuclear power plants or other nuclear facilities
    Basic understanding in the configuration of pressurized water reactors
    Experience with work orders and blockings.
    Experience with work planning for industrial installations
    Ability to work on the different process diagram, isometrics, preparation of solution and support for inventories in the field
    General understanding of mechanics, thermodynamics, fluid mechanics and measurement/instrumentation technology
    General understanding in electrical technology
    Experience with plant management systems
    Computer literacy in MS-Office
    Experience in MS Project would be helpful
    Desired:
    Ability to use the different project data bases, software etc.
    Technical:
    Working experience in Permit to work offices
    Languages (Level): English (fluent)
    Ability with French, German or Finnish would be a plus.

    Scope (including main skills):

    TASKS:

    • Management that scheduled work orders and blockings are handled in time by the different stake holders in Maintenance, Planning/Scheduling, Permit to work office
    • Technical clarification of work orders / Permits to test and creation and validation of blockings / simulations.
    • Planning of works / tests from work order creation, via blocking creation, work execution up to finalization of works/tests
    • Management of the interfaces of the different departments for all kind of works

    EXPECTED DELIVERABLES:

    • Validated work orders and blockings
    • Carried out blockings
    • Work programs

    INTERFACES WITH:

    • Shift supervisor
    • OIO manager
    • Plant status management / scheduling
    • PTW Office manager
    • Other PTW Officers
    • Commissioning Engineers
    • Maintenance department / work planning
    • Client


  • [Doha, Qatar ]




    We are recruiting for a Site Lifting Specialist for one of our Clients

    Terms & Condition:

    Location of Assignment : Offshore - Qatar

    Work Assignment : Contract Hire ( to work for the Client through MPH )

    Contract Duration : ASAP - MARCH 2021

    Rotation : 2x8x6 ( 2 weeks Quarantine x 8 weeks ON x 6 weeks OFF )

    QUALIFICATIONS & EXPERIENCE REQUIRED

    • Minimum 10 years in the lifting & handling industry at supervisory level
    • Following OPITO certifications :
    1. LCP (LOLER Competent Person),
    2. Banksman Slinger OPITO Level 3 or 4
    3. Rigger OPITO Level 3 or 4,x`
    4. Rigging Loft Management
    5. NSL LEI-6 Lifting Equipment Inspection
    • Broad and extensive knowledge in handling & lifting appliance & operations
    • Working to International standards such as: BS, LOLER, etc.!
    • Experienced in Oil & Gas Industry
    • Worked in onshore & offshore operations
    • Have working profile such as: Rigger * Rigger Foreman * Rigging Supervisor * Lifting Supervisor * Lifting Superintendent
    • Risk assessment in relation to health, safety & environment
    • Supervision of critical and heavy lifts
    • Experience in training and coaching is preferred

    ACTIVITIES

    • Provide expertise in daily handling & lifting activities including the categorization of lifts
    • Risk assessment and hazard identification
    • Assist Company CPLO and Lead SLS in technical review of lifting operations
    • Selection of equipment for lifting operations
    • Attendance at lifting toolbox talks
    • Post-job debriefs
    • Assessment of completed jobs
    • Review of lift plans
    • Promote safe handling and lifting operation referring COMPANY HSE police and international standard, review engineering calculation for complex and complicated lifts
    • Review complicated and complex lift plan and attend the lifts
    • Perform condition check and fitness for purpose on lifting appliances, CCUs, and evaluate their utilization on site
    • Provide lifting and handling expertise advice to all HSE Site Authority (HSE-SA) and HSE-SA-Delegates
    • To be Involved in plans internal audits of the lifting operations, participates in lifting operations incident investigation and analyses






  • We are recruiting for a PMS and Risk Management Lead for one of our clients

    Following are Terms & Conditions for the role:

    Location : Qatar - Onshore

    Duration : 24 Months

    Work Schedule : 6 days a week / 10 hours a day

    Job Purpose :

    • Reporting to the Head of Business, the PMS & Risk Management Lead is responsible for Implementing the Project Management Systems strategy and plans and ensuring a robust risk management process is in place.
    • The lead is responsible for supervising the Contractor's activities related to Offshore Project PMS and Risk deliverables and ensure objectives are met within approved schedules, budget and scope in accordance with the Contract.

    Requirements :

    • Bachelor's Degree, diploma or certification and experience in a similar role.
    • 10+ years of experience in Oil and Gas is preferred with at least 5 years demonstrated Project Management and Risk management experience in major capital projects
    • Experience with EPC contractors, sub-contractors and vendors involved in the oil and gas industry
    • Demonstrated ability and sensitivity to work with people from variety of cultural backgrounds
    • Excellent interpersonal and communication skills with a focus on teamwork and the ability to communicate and interact within a PMT
    • Mobility to other countries as required

    Key Job Accountabilities

    • Monitor and expedite the Project risk and PMS activities of contractors, and coordinate the PMS activities with the PMT to ensure that company's PMS objectives are implemented and met with regards to cost, schedule and quality.
    • Develop and steward the risk management activities within Offshore and ensure the results are communicated to EP&S and Senior Management.
    • Work with Management to ensure compliance with all Risk Management procedures and attend meetings as needed to ensure all Project Management team members have given input to risk items and ensure all new risk items are raised and communicated to all for review and input.
    • Verify contractor's performance to ensure their compliance with company's requirements and review and monitors prime contractor's PMS activities and surveillance plans verifying that the PMS is implemented.
    • Review PMS reports, attends to PMS meetings, and maintain good communication with Contractors to highlight to management potential concerns and delays.
    • Review contractor's PMS procedures and documents and participate in review of contractor's compliance to PMS deliverables, assisting contractor in resolving PMS issues and problems. Review and monitors prime contractors' plan for compliance.
    • Ensures "Cold eyes" reviews are coordinated with EP&S team and follow up and close out all items raised as part of any review.
    • Work effectively within established policies and procedures and participates in the further development of these to meet changing needs.


  • [riyadh, Saudi Arabia ]




    MAIN TASKS AND RESPONSIBILITIES (KEY ACCOUNTABILITIES)

    As a Service Delivery Manager - Level 1 for the DES team, you will participate in regional projects by leading the delivery of services to ensure customer satisfaction and fulfillment of service level agreements (SLA) and maximize service profitability.

    A week in the life of a Service Delivery Manager Level 1:
    * You will manage the transition from project to production as the point of contact for Operations and support the final acceptance of the transfer.
    * You will ensure SLA delivery to the customer and provide escalation support as needed.
    * You will manage customer relationships to ensure delivery satisfaction.
    * You will provide quotation support for operations.
    * You will manage the operations of service delivery projects by applying quality processes and project management tools and the reporting of solution activities and customer feedback.
    * You will perform change management control and achieve contract KPIs and communicate changes to the Production Engineer.
    * You will ensure traffic boosting and service usage of managed services by collaborating with the Marketing team.







  • We are currently looking for an As-Built Documentation HVAC Engineer for a Nuclear Power Plant.

    Terms and conditions:

    Job Location : Finland

    Type of Assignment : Contract hire

    Contract Duration : 3 - 6 months

    Work Schedule : 5 days per week (Monday to Friday), 44 hours per week

    Accommodation : 1 bedroom and living fully furnished and equipped in either Pori or in Rauma

    Local Transportation : Provided

    Medical Coverage : Provided

    Mob/Demob Tickets : Provided

    JOB DESCRIPTION:

    • Checking of Data Bases regarding correct Revision and Implementation of all Changes in HVAC Documentation (Field Change Requests, Design Change Requests, Open Points, etc.)
    • Modification of AutoCAD and pdf drawings where necessary to get documentation in As-Built state
    • Coordination with Sub-Suppliers where As-Builts are in Scope of Sub-Suppliers
    • Reporting of Work Progress to As-Built-Task Leader of HVAC Engineering

    General and technical background expected:

    • Experience in HVAC Engineering (especially Documentation)
    • Engineer with/without Bachelor or Master in Mechanical (HVAC-) Engineering or related
    • Work confidently within site teams and HBO
    • Able to express clearly verbally and in writing (English language)
    • Adapt successfully to changing situations & environments
    • Gather information systematically to establish facts & principles. Problem solving.
    • Manage time effectively and able to work to deadlines.
    • Motivated to solve problems/issues & target oriented

    Technical:

    • Experienced in HVAC Engineering (e.g. HVAC Construction Plan Documents, Arrangement Drawings, Support Drawings, Isometrics, Calculations, etc.)
    • (basic) Knowledge of the OL3-Project (tools, project-structure, teams & documentation)
    • Knowledge in AutoCAD, pdf-processing, MS-Office (including MS Access)
    • (basic) Knowledge in PDMS (Plant Design Management Tool - no operator skills needed)
    • Knowledge in Work with Data Bases (required for AREVA Information Management System)


  • [Doha, Qatar ]




    -Support and arrange travel for Company offshore personnel. Ensure that the best possible service is provided in a timely manner and by obtaining the best possible travel schedule in accordance with mobilization procedures.
    - Obtain visas and book tickets for company offshore personnel. Distribute required documents to business focal points and contractors
    - Keep track of visa's and forecast the change of offshore crew to prevent loss of work days for the personnel offshore.
    - Maintain a clear overview of bookings and arrivals for scheduled offshore personal.
    - Ensure successful, coordinated and timely implementation of the initiative.
    - Plan, monitor and improve performance of the mobilization process,
    - Create, optimize and modify process flowcharts if required
    - Improve current system practices
    - Perform statistical and predictive analysis
    - Manage dashboard and prepare reports to Management on a weekly basis
    - Perform other duties as assigned
    - The operational element in the position requires 24/7 mindset.



  • [Dubai, United Arab Emirates (UAE) ]




    Terms & Conditions

    • Location: Dubai
    • Duration: 2 months (renewable)
    • Offshore experience
    • Candidate should be in Dubai already


  • [Dubai, United Arab Emirates (UAE) ]




    Terms & Conditions

    • Location: Dubai
    • Duration: 2 months (renewable)
    • Offshore experience
    • Candidate should be in Dubai already


  • [Finland, Finland ]




    JOB DESCRIPTION:

    • Preparation of files to be exchanged with Sub-Suppliers (download from data base and storing on echxange server)
    • Surveillance and Follow-up of file flow between company and Sub-Suppliers
    • Formal check of files received from Sub-Suppliers
    • Technical check of files from Sub-Suppliers
    • Upload of files back into data base

    General and technical background expected:

    • Experience in Electrical Engineering
    • Engineer with/without Bachelor in Electrical Engineering or related
    • Work confidently within site teams and HBO
    • Able to express clearly verbally and in writing (English language)
    • Adapt successfully to changing situations & environments
    • Gather information systematically to establish facts & principles. Problem solving.
    • Manage time effectively and able to work to deadlines.
    • Motivated to solve problems/issues & target oriented

    Technical:

    • Preferred with experience in Electrical Engineering or related (especially Electrical Building Technology)
    • Knowledge of the Nuclear-Project preferred (tools, project-structure, teams & documentation)
    • Good knowledge in MS-Office
    • Knowledge in Work with Data Bases (required for company Information Management System)

    Languages (Level):

    • English fluent (mandatory)
    • French fluent (optional)
    • German fluent (optional)






  • We are recruiting for a Preservation Site Leader for one of our Clients

    Terms & Condition:

    Work Location : China ( fabrication yards )

    Duration : 2 years with a possible extension

    Work Status : Rotation 8 weeks ON / 2 weeks OFF / 6 days a week ( Monday to Saturday )

    *** candidates based in CHINA

    Qualifications / Skills :

    • Relevant engineering degree from an accredited university
    • Substantial experience with fabrication and/or preservation of chemical or oil & gas equipment and facilities, ideally with mechanical competency
    • Proven track record as an Construction, Commissioning and/or Maintenance Senior level
    • HSE basic course
    • Fluent knowledge of English
    • Total years of experience are 10-15 years
    • Good knowledge of mechanical static (vessels, valves, piping, and etc.), electrical and instrumentation equipment and common ways to preserve them
    • Good understanding of preservation system methodology, including applicable software
    • Knowledge of dealing with non-conforming products, deviations and safety requirements for preservation work
    • Familiar with OPERCOM commissioning methodology
    • Familiar with Construction and Commissioning key documents and dossiers to build.

    Main Responsibilities :

    • Drive and advice the Preservation team
    • To participate to technical meetings, challenging the Contractor, to monitor and promote effective and cost saving solutions.
    • Provide subject matter preservation expertise during review of Contractor(s) preservation documents, including execution schedules, mob plans, preservation completion databases (EasyPlant, SharePoint) etc.
    • Review and approve the Preservation Dossiers with regard to preservation scopes completed at Yards.
    • Issue punches / NCRs and keeping NCRs registers as applicable
    • Review and comment CTR's proposals for punches / NCRs resolution and deviation/concession requests.
    • Assist in the supervision of the administration of the preservation punch list database(s)
    • Promote safe practice for any Project activity, and ensure that preservation activities are performed by Contractors in a safe and efficient manner in accordance with Company policies and rules
    • Ensure the timely provision of exhaustive information and data required by contractor for preservation activities from other project contractors, third parties and Company.
    • Preparation and submission data in weekly, monthly reports following the approved format related to the status of preservation. Highlight critical problems and propose corrective actions.
    • Timely inform Commissioning Manager or delegate on contractual gaps in the scope of works of the contractors during the preparation and performing their preservation activities.






  • We are currently looking for a Permit to Work (PTW) - Work Planner for a Nuclear Power Plant.

    Objectives:

    • General scope and objectives PTW work planner for Blockings, Work Orders and Tests

    Minimum Requirements:

    • Mechanical or Electrical Engineering degree
    • Experience in nuclear power plants or other nuclear facilities
    • Basic understanding in the configuration of pressurized water reactors
    • Experience with work orders and blockings.
    • Experience with work planning for industrial installations
    • Ability to work on the different process diagram, isometrics, preparation of solution and support for inventories in the field
    • General understanding of mechanics, thermodynamics, fluid mechanics and measurement/instrumentation technology
    • General understanding in electrical technology
    • Experience with plant management systems

    Desired:

    • Ability to use the different project data bases, software etc.
    • Computer literacy in MS-Office
    • Experience in MS Project would be helpful

    Technical:

    • Working experience in Permit to work offices







  • We are currently looking for a Plant Status Management (PSM) - Overall Planner for a Nuclear Power Plant.

    Job Responsibilities:

    Plant Status Management PSM - Overall Planner, Operational Planner

    General tasks:

    • Coordinate the complete scheduling within the integrated master schedule in Primavera considering the input from Commissioning, IMO, Procurement, Engineering and Operation,
    • Ensure safe and reliable operation and harmonization of all activities,
    • Optimization of the schedule in order to avoid blocking conflicts and unnecessary too long system unavailability.

    Specific tasks:

    • Defining Work Windows for remaining preventive, corrective and palliative maintenance activities,
    • Check that the activities from all entities fit together in the time schedule including COMM and IMO,
    • Secure the not violation of the operational requirements, Technical Specifications and other safety requirements,
    • Prepare temporary operations, including review of temporary instructions for operator crew,
    • Inform and guide the shift teams in case of critical operations,
    • Trouble shooting on high operational level,
    • Liaison with COMPANY in regard to implementation of new processes and optimization of existing ones. Preparation of applicable project instructions and procedures,
    • Coordination of the assessment and planning of Work Orders to be executed after FLG due to a lack of spare parts including associated nuclear & radiation safety assessment and approval from TVO,
    • Coordination and scheduling of all design changes (DCO, ICCO and FCO) with hardware impact planned to be executed from FLG with respect of the commissioning program and technical specifications,
    • Coordination and scheduling of all operating and testing manuals planned from FLG up to PTO.

    Tools:

    • Integrated master schedule in Primavera

    Minimum Requirements:

    • Mechanical, Process, Electrical or Nuclear Engineering Degree
    • Solid knowledge on PWR general design, its systems (process, electrical and I & C) and operational conditions
    • Nuclear Experience in PWR is a MUST

    Technical Skills:

    • Good understanding of thermo-hydraulics and plant behaviour,
    • Experience with Operating Manuals, including normal operation procedures, testing manuals and Commissioning documentation,
    • Experience with technical design documentation, including P&IDs, I&C functional and electrical diagrams,
    • Knowledge of scheduling and planning tools, preferably Primavera,
    • Experience in Plant operation and/or Outage and/or Maintenance planning.






  • Report to the PSM Manager for Planning and Coordination of all physical activities on waste systems.

    Tasks:

    • Gathering of all tasks from Commissioning, Construction, Maintenance, Operation
    • Check that the activities from all entities fit together in the time schedule
    • Secure the not violation of the technical specifications
    • Propose/define changes in the planning sequences in order to
      • Fulfil the technical specifications
      • Get a more appropriate sequence for the project progress
    • Harmonize the electrical activities with the mechanical and the I&C activities
    • Looking in the future to detect and remove obstacles in time.
    • Deliver the final electrical level 1 and level 2 schedules for the project - schedule owner for level 1 and level 2 electrical
    • Organize the PTW activities in order to fulfil the schedule
    • Lead the meetings with the representatives from all disciplines

    Regular reporting about the schedule and plant progress

    Tools:

    • Integrated master schedule in Primavera

    Required consent as foreseen:

    To work in controlled area (radiation protection): YES

    To work in shift/rotation: YES

    Skills required:

    Team player

    Chairing of meetings

    Technical:

    Work planning

    PTW experience

    Languages (Level):

    English fluent



  • [Torino and Bergamo, Italy ]




    Terms & Conditions

    • Job Location : Italy
    • Category : Project Management
    • Job Time : Full-Time
    • Experience Level : Mid Level
    • Education Level : Associate Degree or Equivalent Experience
    • Shift Schedule Standard

    Main responsibilities

    • Liaise with the Project Manager on the specific requirements of the contract.
    • Overall responsibility for health and safety and act as safety representative on site.
    • To be pro-active in ensuring that the work being carried out by the Site Supervisors is to the Company standard.
    • Write and distribute a weekly progress report of site activities and highlight any potential delays to the issued project programme.
    • Ensure completeness of mechanical and electrical areas prior to commissioning commencing against the issued project programme.
    • Provide first aid cover.
    • Assist in commissioning/testing where required.
    • Create and maintain a team ethos.
    • Collate and record sub-contractor Method Statements/Risk Assessments.
    • Attend client co-ordination meetings as required.
    • Hold weekly sub-contractor co-ordination meetings to ensure good progress is being made.
    • Ensure site rules are observed by employees and its sub-contractors.
    • Co-ordinate sub-contract workforce and materials for the project.

    Minimum Requirements

    • Substantial experience in a similar position at a supervisory level.
    • NEBOSH Certificate.
    • City & Guilds Qualification in either a mechanical or electrical discipline.
    • Working knowledge of CDM regulations.
    • First Aid in the Workplaces
    • Ability to work at height.
    • MEWP's Licence (desirable).
    • Knowledge of Microsoft Excel and Word.


  • [madrid, Spain ]




    Terms & Conditions

    • Job Location : Spain
    • Category : Project Management
    • Job Time : Full-Time
    • Experience Level : Mid Level
    • Education Level : Associate Degree or Equivalent Experience
    • Shift Schedule Standard

    Main responsibilities

    • Liaise with the Project Manager on the specific requirements of the contract.
    • Overall responsibility for health and safety and act as safety representative on site.
    • To be pro-active in ensuring that the work being carried out by the Site Supervisors is to the Company standard.
    • Write and distribute a weekly progress report of site activities and highlight any potential delays to the issued project programme.
    • Ensure completeness of mechanical and electrical areas prior to commissioning commencing against the issued project programme.
    • Provide first aid cover.
    • Assist in commissioning/testing where required.
    • Create and maintain a team ethos.
    • Collate and record sub-contractor Method Statements/Risk Assessments.
    • Attend client co-ordination meetings as required.
    • Hold weekly sub-contractor co-ordination meetings to ensure good progress is being made.
    • Ensure site rules are observed by employees and its sub-contractors.
    • Co-ordinate sub-contract workforce and materials for the project.

    Minimum Requirements

    • Substantial experience in a similar position at a supervisory level.
    • NEBOSH Certificate.
    • City & Guilds Qualification in either a mechanical or electrical discipline.
    • Working knowledge of CDM regulations.
    • First Aid in the Workplace.
    • Ability to work at height.
    • MEWP's Licence (desirable).
    • Knowledge of Microsoft Excel and Word.


  • [Finland, Finland ]




    We are currently looking for a Infield Operator for a Nuclear Power Plant.

    Terms and conditions:

    Job Location : Finland

    Type of Assignment : Contract hire

    Contract Duration : 1 year contract

    Starting date : Jan 2021

    Work Schedule : 5 days per week (Monday to Friday), 44 hours per week

    Accommodation : Provided

    Local Transportation : Provided

    Medical Coverage : Provided

    Mob/Demob Tickets : Provided







  • Requirements

    • Experience in international projects, in an international team
    • Relocation to PAKS
    • Hungarian and Russian
    • 12 months contract with extension


  • [Olkiluoto, Finland ]




    We are currently looking for Operations Shift Manager for a Nuclear Power Plant project.

    Job Location : Finland

    Type of Assignment : Contract hire

    Contract Duration : 1 year (With possible extention)

    Work Schedule : 5 days per week (Monday to Friday), 44 hours per week

    Accommodation : Provided

    Local Transportation : Provided

    Medical Coverage : Provided

    Mob/Demob Tickets : Provided



  • [Finland, Finland ]




    Scope

    The Tool & Process coordinator is a backup function within IMO and reports to the IMO managers. His scope of work is:

    • Create, review and update IMO processes and manuals.
    • Investigate the good use and implementation of tools and processes on site
    • Administrate the IMM-Platform following management and users requests
    • Debug and adapt IMM-Platform
    • Support IMO teams with process, tool, training and improvement related topics
    • Continuously question, improve and adapt current tools and processes
    • Investigate IMO lessons learned, feedbacks and reports in order to adapt and improve tools and processes
    • Regularly communicate to the whole IMO reminders and information related to modifications of process

    Main skills

    Soft Skills:

    • Structured and well organized
    • Curious and questioning attitude
    • Good communication skills
    • Persistent worker
    • Adaptable, open-minded and high responsivity
    • Interpersonal, trainer and self-taught skills is much appreciated

    Hard Skills:

    • Back-end development : PHP (CodeIgniter) and MySQL
    • Front-end development : HTML, CSS, JavaScript
    • Datamining and data analysis capacity
    • Fluent English is a must have. German, French and/or Finnish is valuable
    • Knowledges of nuclear culture, safety, security, quality and technical processes is valuable


  • [Dubai, United Arab Emirates (UAE) ]




    Our EPC client with projects involve in Oil and Gas, Mining, Infrastructure, Power, Ports and Marine is urgently looking for a Corporate HSE Manager for the below requirements:

    - Experience in Oil and gas or Power, or Ports or Marine but preferably in Oil and gas.

    - Should have Min 15 Years of overall Experiences

    - Must have Extensive Experiences as a Manager level in HSE

    - Work Location: Dubai UAE

    - Direct Hire: Permanent position

    - Work Schedule as per UAE Labour law

    - Must be currently in UAE (Mandatory)







  • Our client, major player in gas processing and oil refining industry, is urgently looking for a "Construction Design Manager"

    Terms and Conditions
    Location: Moscow with business trips to Krasnodar and construction sites
    Status: Single, Resident
    Duration of contract: 2 Years
    Visa+ Mob+ Demob tickets: Provided
    Medical Insurance: Provided
    Accommodation: provided

    Job requirements:
    Qualifications and experience:
    Experience as a design engineer in the oil and gas industry
    Justified work experience on at least 1 LNG project
    Work experience related to modular construction, explosion protection and protection against spills of cryogenic liquids
    Practical knowledge of Russian and international norms and standards
    Experience on the side of an EPC contractor
    Required work experience - from 10 years
    AVEVA 3D, TEKLA

    Personal qualities:
    Fluency in English, Russian will be an advantage
    Skill to work in team
    Result oriented

    Job description:
    Preliminary calculation of the dimensions of metal structures, layout plan, Material & Logistics management and cost estimation
    Interpretation of geotechnical reports and engineering surveys for inclusion in design
    Design of foundations and pile foundations (including for LNG storage tanks)
    Calculations for explosion resistance and analysis of structural collapse as a result of fire
    Structural drawings for onshore and offshore structures (pipeline racks, buildings, modules, topsides)
    Basic requirements for the design of buildings (substations, control rooms, etc.)
    Guidance in the process of 3D model review and design analysis as applied to building structures
    Weight control and optimization through increased cost efficiency
    Preparation of technical specifications as part of the conclusion of contracts for the factory production of structures
    Use of data (on loads) from the supplier in the design
    Guidance in the process of manufacturing structures at a factory, construction site or shipyard.

    Interested Candidate, Kindly Apply.







  • We are recruiting for a Process Equipment Manager - LNG for one of our client,

    Terms & Condition:

    Location of Assignment : Moscow with business trips to Krasnodar and construction sites

    Duration : 2 years

    Work Status : Resident, single

    Tentative Start Date : beginning of 2021

    Mandatory Requirements :

    • Diploma in Process Engineer with a specialization in LNG technology
    • Justified work experience at least 1 LNG project
    • Practical knowledge of Russian and international norms and standards
    • In-depth technical knowledge of LNG liquefaction, storage and shipping technologies.
    • Experience in a company that is a licensor of LNG technology or a specialized EPC contractor
    • Required work experience - from 10 years.

    Job description:

    • Preliminary calculation of the size of technological equipment, layout plan and cost estimate
    • Choice of production technology
    • Analysis / preparation of explanatory notes on the technological part and conceptual technological schemes
    • Simulation of technological processes
    • Expert assessment of the schematic diagrams of pipelines and instrumentation, optimization of the technological process
    • Analysis / preparation of technological questionnaires and basic design requirements
    • Leadership in the process of HAZOP, SIL, 3D modeling and analysis of technical solutions for LNG projects
    • Guidance during construction and commissioning






  • Scope (including main skills):

    * Responsible to coordinate and control the activities of the Shift Operation Team (Reactor Operator, Turbine Operator, Auxiliary Operator and In-Field Operators) together with Client's Shift Supervisor.

    * Issue guidelines and instructions relating to plant operation processes

    * To manage and control the activities (operation, periodic tests, maintenance preparation, tagging, etc.) of the Shift Operation Team,

    * To support all commissioning activities (operation of systems, validation of operating and periodic test procedures, etc.) in co-ordination with the Commissioning Engineers, PTW-Office and Maintenance Coordination Team,

    * Prepare systems for commissioning and maintenance in co-ordination with the PTWOffice Team

    * Coordination and active participation in the Blocking-, Work Order-, Test Permit-,Fault Notification and Temporary Modification Processes,

    * To fulfill the requirements of Plant Technical Specifications,

    * After fuel loading continue to carry overall responsibility in close coordination with the Shift Supervisor of our client TVO, who will bear the nuclear safety accountability

    EXPECTED DELIVERABLES:

    * Validation of Work Orders, Blockings, Permit to Tests, Fault Notices and other documents associated with the PTW office - daily

    * Validation of Operating Manuals and Nuclear Testing Manuals - as needed

    * Preparation of Operating Shift Round Sheets

    * Preparation of OIO Shift Instructions

    * Validation of Temporary Shift Instructions

    * Preparation of OIO Shift Instructions

    * Filling of Shift Logbook

    Skills required:

    * Mechanical or Electrical engineer

    * At least 10 year experience as a nuclear plant operator of which minimum 5 years at licensed supervisory level on shift

    * Exposure to all facets of plant operation, particularly exposure to plant refueling and maintenance outages, Scheduling of planned work and PTW implementation, plant start-up and shutdown, modifications implementation/commissioning

    * Ability to work on the different process diagram, isometrics, preparation of solution and support for inventories in the field

    * In-depth knowledge of nuclear plant operations and/or procedural planning of shutdowns/outages

    Demonstrable knowledge of power plant, system and process engineering

    * General understanding of mechanics, thermodynamics, fluid mechanics and measurement/instrumentation technology * Computer literacy in MS-Office Desired:

    * Experience in procedure writing (required for validation of Operating manuals and for creating Shift instructions) Ability to use the different project data bases, software etc.







  • The goal of this job is to help and support the NI TOS for the task in link with Work process, blocking process fn process temporary modification process .

    The tasks as Help and support NI TOS will be:

    • Technical clarification of work orders / Permits to test and creation and validation of blockings / simulations.
    • Closure work order, temporary modification fault notification etc after analysis
    • Analysis of the boundaries or the blockings before execution of blockings .
    • Under the responsibility of the NI TOS , oversee In-field operator teams for establishing safe work conditions (equipment)
    • Under the responsibility of NI TOS manage the lineup, depressurizing, de-energising, locking and tagging)
    • Give the clear picture of all the availability of the systems under the responsibility of NI TOS ( P&Id) .
    • On request of NI TOS prepare Permit to Work documentation and ensure strict compliance

    Needed skills Required:

    • Mechanical engineering degree, or experienced technician.
    • 5 years' experience in nuclear power plants
    • 5 years' experience with mechanical work orders and blockings.
    • Detailed knowledge about the mechanical process documentation.
    • Ability to work on the different process diagram, isometrics, preparation of solution and

    support for inventories in the field

    • General understanding of mechanics, thermodynamics, fluid mechanics, and

    measurement/instrumentation technology

    • General understanding in electrical technology
    • Computer literacy in MS-Office

    Desired:

    • Ability to use the different project data bases, software etc.

    Technical:

    • Knowledge about PWR, EPR technology
    • Working experience in Permit to work offices
    • Working in unit in operation PWR

    Languages (Level): English (fluent)

    • Ability with French, German or Finnish would be a plus.
    • Ability to work on the different process diagram, isometrics, preparation of solution and support for inventories in the field.
    • In-depth knowledge of nuclear plant operations and/or procedural planning of shutdowns/outages






  • Scope (including main skills):

    * Responsible to coordinate and control the activities of the Shift Operation Team (Reactor Operator, Turbine Operator, Auxiliary Operator and In-Field Operators) together with Client's Shift Supervisor.

    * Issue guidelines and instructions relating to plant operation processes

    * To manage and control the activities (operation, periodic tests, maintenance preparation, tagging, etc.) of the Shift Operation Team,

    * To support all commissioning activities (operation of systems, validation of operating and periodic test procedures, etc.) in co-ordination with the Commissioning Engineers, PTW-Office and Maintenance Coordination Team,

    * Prepare systems for commissioning and maintenance in co-ordination with the PTWOffice Team

    * Coordination and active participation in the Blocking-, Work Order-, Test Permit-,Fault Notification and Temporary Modification Processes,

    * To fulfill the requirements of Plant Technical Specifications,

    * After fuel loading continue to carry overall responsibility in close coordination with the Shift Supervisor of our client TVO, who will bear the nuclear safety accountability

    EXPECTED DELIVERABLES:

    * Validation of Work Orders, Blockings, Permit to Tests, Fault Notices and other documents associated with the PTW office - daily

    * Validation of Operating Manuals and Nuclear Testing Manuals - as needed

    * Preparation of Operating Shift Round Sheets

    * Preparation of OIO Shift Instructions

    * Validation of Temporary Shift Instructions

    * Preparation of OIO Shift Instructions

    * Filling of Shift Logbook

    Skills required:

    * Mechanical or Electrical engineer

    * At least 10 year experience as a nuclear plant operator of which minimum 5 years at licensed supervisory level on shift

    * Exposure to all facets of plant operation, particularly exposure to plant refueling and maintenance outages, Scheduling of planned work and PTW implementation, plant start-up and shutdown, modifications implementation/commissioning

    * Ability to work on the different process diagram, isometrics, preparation of solution and support for inventories in the field

    * In-depth knowledge of nuclear plant operations and/or procedural planning of shutdowns/outages

    Demonstrable knowledge of power plant, system and process engineering

    * General understanding of mechanics, thermodynamics, fluid mechanics and measurement/instrumentation technology * Computer literacy in MS-Office Desired:

    * Experience in procedure writing (required for validation of Operating manuals and for creating Shift instructions) Ability to use the different project data bases, software etc.



  • [Finland, Finland ]




    Scope (including main skills):

    1. Function

    The Electrical In Field Operator will be in charge of following activities:

    Performance of electrical operation of MV/LV/ DC switchgears as required by PAISI in the frame of BLOCKING and NORMALIZATION process according CP 4.2.1

    • Maintaining a high level of quality and attention to detail in documenting his/ her actions
    • Flexibility in assigned tasks with a commitment to supporting the project schedule
    • Quality, schedule and safety of all electrical operations activities, in particular:
      • Perform all operations activities in compliance with the Finnish electrical law and applicable rules and regulation in the project
      • Support the timely execution of scheduled tasks
    1. Qualification

    Performance of above described scope of work requires following expertise:

    • The candidate should be able to get familiarized with the technique in a short time frame
    • Electrical qualification degree required in one of the following disciplines:
      Electrical installation, service and maintenance works, trouble shouting on electrical systems.
    • Experience in commissioning or operation of MV/LV/DC power supply distribution systems preferably knowledge in SIVACON switchgears
    • 1 plus years, experience on electrical systems at large industrial installations or power generation plants. (Nuclear, Process systems, Oil & Gas, Production chain)
    • Able to read and understand the electrical technical documentation - circuit diagrams, data sheets, EOMM, …
    • Fluent English required.
    • Nuclear experience will also be appreciated
    • PTW experience will also be appreciated
    • Working in a team with other technicians and cooperate with other disciplines
    • SFS 6002 certificate and valid 1st aid training is highly appreciated


  • [Doha, Qatar ]




    • To Coordinate the Quality Control and Surveillance Activities with a strong support to packages regarding Metallurgy, Welding and Non-destructive Testing.
    • To establish quality inspection team in each Project organization.
    • To establish and implement the Project verification strategy in line with Regulations and Company requirements.
    • To review and give advice on Contractors', Subcontractors' and suppliers' QA/QC Inspection & Test Plans for whole coherence and adequacy.
    • To define, organise and coordinate the Quality Surveillance of Contractors and of their main Subcontractors, organise Kick Off Meeting and Pre-Inspection Meeting and visits in coordination with concerned Project Managers, and issue updated evaluations of their performance within the project;
    • To participate in the establishment and implementation of the Major Project Quality Management System.
    • To implement the Company Technical Referential and applicable local and international codes.
    • To assist Projects in the execution of the FEED, detailed engineering, procurement, fabrication, construction, transportation and offshore installation works.


  • [Finland, Finland ]




    Scope

    The Tool & Process coordinator is a backup function within IMO and reports to the IMO managers. His scope of work is:

    • Create, review and update IMO processes and manuals.
    • Investigate the good use and implementation of tools and processes on site
    • Administrate the IMM-Platform following management and users requests
    • Debug and adapt IMM-Platform
    • Support IMO teams with process, tool, training and improvement related topics
    • Continuously question, improve and adapt current tools and processes
    • Investigate IMO lessons learned, feedbacks and reports in order to adapt and improve tools and processes
    • Regularly communicate to the whole IMO reminders and information related to modifications of process

    Main skills

    Soft Skills:

    • Structured and well organized
    • Curious and questioning attitude
    • Good communication skills
    • Persistent worker
    • Adaptable, open-minded and high responsivity
    • Interpersonal, trainer and self-taught skills is much appreciated

    Hard Skills:

    • Back-end development : PHP (CodeIgniter) and MySQL
    • Front-end development : HTML, CSS, JavaScript
    • Datamining and data analysis capacity
    • Fluent English is a must have. German, French and/or Finnish is valuable
    • Knowledges of nuclear culture, safety, security, quality and technical processes is valuable







  • We are recruiting for a QA/QC Leader (E&I ) for one of our Clients

    Terms & Condition:

    Work Location : China ( Fabrication yards )

    Duration : 2 years with possible extension

    Work Status : Rotation 8 weeks ON / 2 weeks OFF / 6 days a week

    Mandatory Experience :

    • LNG / Modules fabrication experience
    • Candidates currently in CHINA

    Job Description

    • Management, assurance and implementation of Quality Control functions delegated by the Subdivision Head at the facility.
    • Systemization of quality control management processes during module fabrication.
    • Coordination of construction process participants within Quality Assurance and Control System by means of introduction of QC process procedures and optimization of current activities.
    • Coordination of teamwork of construction process participants in order to achieve the set level of quality in compliance with design documentation, and Laws and Regulations.
    • Management of QC Group that incorporates experts in various disciplines for inspections of on-site module fabrication.
    • Identification and highlighting of all possible risks, opportunities or threats that may positively or negatively impact cost, quality or project tasks.
    • Participation in developing Company norms and standards regulating quality requirements.
    • Participation in development of QC procedures and ITPs.
    • Participation in staffing the Group with highly qualified personnel.
    • Making sure Company personnel participates in inspections and tests conducted to check work quality for compliance with design documentation requirements including during incoming inspection of equipment and materials arriving on construction site.
    • Making sure citations issued by Subdivision specialists are collected and stored and following up on relevant corrective action.
    • Development of weekly/monthly reports on operation performance to control Key Performance Indicators (KPI) and critical data analysis.
    • Assistance in review and fast authorization of technical deviation requests.
    • Control of Contractors work quality including but not limited development of quality matrices and their use in the course of construction.
    • Presentation of quality control reports, construction quality non-conformance reports and analysis of the reasons for quality non-conformances to the Subdivision Head and making proposals on how to correct quality non-conformances and prevent them from happening in the future.

    Candidate Specification :

    • University Engineering Degree
    • Education in Quality Management

    Required professional knowledge and skills

    • Education in Quality Management is a plus.
    • Valid National Agency of Welding Control (NAKS) certificate (Level 4 or higher) or International Welding Engineer (IWE) Diploma.
    • Valid NDT certificates and knowledge assessment test certificates: Level 2 or higher.
    • Certificate "ISO 9001:2015 Quality Management System Lead Auditor".
    • At least fifteen (15) years of management experience with production companies and on construction sites in oil and gas industry with five subordinates or more.
    • At least ten (10) years of certified experience in construction quality control, including work with Quality Assurance / Quality Control Plans, Inspection and Test Plans, Test Procedures and and in non-conformance and deviation management.
    • At least five (5) years of management experience with a multidisciplinary inspector team, at onshore / offshore facilities manufacturing and construction phases on oil and gas projects, particularly in relation to metal structures, piping, electrical equipment and instrumentation, coatings, insulation, construction scaffolding, welding, testing, etc.
    • Management experience with an international contractors and suppliers team, particularly in modular prefabricated buildings and offshore facilities construction.
    • Proven experience in modules fabrication, ideally in SE Asia.







  • Scope (including main skills):

    1. Function

    During the overall phases Phase from end of B3, to the end of the project, when issues/malfunctions occurred (on actuators , sensors, components…) the first attempt to solve the issues for OCE (in coordination with SSV and TOS) is to Contact the Commissioning Investigation Team (available during normal hours or on call during night and weekend.

    During the night or during the week end the SREs are not often on call and available, so the lead of this first investigation is given to this team with a broader knowledge.

    In order to be efficient the first investigation during Overall operation (from the end of phase B3-last line up before FLG to PTO) , the first investigation with the Investigation team will have the following knowledge :

    • Mechanical
    • Electrical
    • I&C
    • Components (valves; motors, sensors…)
    • Process
    • Risks

    This team will be composed of:

    Mechanical Actuators / components oriented persons and/or Sensors electrical oriented persons. After an issue is declared in MCR, OCE (after discussion and agreement with SSV and TOS) will contact the Commissioning investigation team in order to perform the first investigation on the field.

    When called by the OCE the Commissioning Investigation team will come in MCR for a pre job briefing with OCE, SSV and TOS in order to agree on the detail of the intervention. After that the Commissioning investigation specialist will always be in communication with MCR (SSV if the intervention is required on equipment).

    This team will act on site for the Overall Commissioning Engineer (OCE) on shift; under his test permit and in close communication with MCR for equipment maneuverability. This first investigation team will give reliable diagnostic to OCE and SSV/TOS in order to draw a repair plan and organize further corrective or preventive actions with I&C team, IMO and SREs through FN.

    • Analyses together with the concerned Commissioning Branches or the Overall commissioning engineer on shift and Operation Integrated Organization of trouble shooting activity arising during overall test phase period for defining actions to be taken.
    1. Qualification

    Performance of above described scope of work requires following expertise:

    • Engineering degree required in one of the following disciplines: Nuclear, Mechanical, Process, or Electrical
    • Nuclear experience: minimum 5 years PWR (or other NPP) experience is required (New Builds or Installed Base). Experience in PWR operation is a plus. He should be knowledgeable of PWR systems, basic nuclear and reactor physics, thermo hydraulics, and PWR chemistry. Experience on the turbine island will also be appreciated.
    • Experience in Test and Commissioning: participation to testing, commissioning, or recommissioning after major refuelling outages on a nuclear power reactor (PWR appreciated) at an operational position is required. Previous experience during cold or hot functional testing on a new build is a plus,

    Fluent English required.



  • [Doha , Qatar ]




    Responsibilities

    • Copy, scan and store documents
    • Update Project and Organizational Logs
    • Burn CDs and Transfer files by FTP
    • Prepare Document Submittal Forms
    • Draft Letters and Correspondence
    • Check for accuracy and edit files
    • Review and update technical documents (e.g. manuals and workflows)
    • Distribute project-related copies to internal teams
    • File documents in physical and digital records
    • Create templates for future use
    • Retrieve files as requested by employees and clients
    • Manage the flow of documentation within the project and organization
    • Maintain confidentiality around sensitive information and terms of agreement
    • Prepare ad-hoc reports on projects as needed

    Draft and circulate Minutes of Meeting

    Requirements

    • Proven work experience as a Document Controller or similar role
    • Experience in Security or Construction Projects in Qatar
    • Familiarity with project management
    • Basic knowledge of Qatari labor and Qatari law
    • Hands-on experience with MS Office and MS Excel
    • Knowledge of Electronic Document Management Systems (EDMS)
    • Proficient typing and editing skills
    • Data organization skills
    • Attention to detail

    Possess excellent writing and speaking skills in English

    • Knowledge in SAP Business One
    • Possess functional Arabic written and typing skills.


  • [New Caledonia, New Caledonia ]




    RESUME DU POSTE
    Contribue et Participe aux activités d'une équipe d'Automaticiens ayant pour fonction d'assurer le maintien en bon état des équipements ou infrastructures du DCS, de façon à fournir la disponibilité, la fiabilité et la performance requise de ce dernier. Les activités doivent être conduites en toute sécurité, dans le respect des normes établies, de l'environnement et des travailleurs.
    Contribue et Participe aux essais liées aux modifications sur les différents secteurs de l'usine.

    DIMENSIONS

    GENERALE

    • Est en charge d'étudier et d'implémenter les modifications d'automatisme nécessaires à l'amélioration du procédé et de la sécurité. Gère et pose des contournement programmes suivant les besoins des opérations. Assiste les clients internes.

    SPECIFIQUE

    • Possède une expertise dans le domaine du système spécifique installé sur le site (800xA d'ABB).

    RESPONSABILITES DU POSTE
    Maintenance:

    • Respecte la normalisation de la programmation et des équipements des réseaux de contrôle
    • Participe à l'assistance technique des techniciens de maintenance EIA, des gens du procédé, de la production, …
    • Participe à la maintenance et au dépannage des systèmes de contrôles et à l'identification des instruments s'y rattachant en cas de problèmes.
    • Participe à l'optimisation des contrôles de procédés en collaboration avec les gens de procédé et la production.
    • Développe ou modifie les programmes suivant les besoins des opérations, des projets, en respectant la procédure de Gestion du Changement.
    • Gère et pose des contournements programmes suivant les besoins des opérations et en respectant la procédure de Gestion des Contournements
    • Participe aux études et modifications des équipements et des programmes existants
    • Participe à la surveillance des équipements et infrastructure du DCS en respectant la procédure de gestion des taches journalières, hebdomadaires, mensuelles.
    • Participe aux tests des équipements en liaison avec les techniciens sur le terrain

    Opérations :

    • Respecte en tout temps une coordination très serrée avec les opérations afin de minimiser les impacts sur la production et minimiser les risques.

    Ressources Humaines :

    • Contribue aux bonnes relations au sein de l'équipe ainsi qu'avec les autres services.
    • Respecte la discipline en accord avec les politiques de l'entreprise.

    Qualité, Santé, Sécurité et Environnement :

    • Applique les consignes sécurité, qualité et environnement et respecte les procédures.

    PROFIL ET COMPETENCES DU POSTE
    Formation :

    • Niveau Ingénieur ou Technicien Supérieur dans le domaine de l'automatisme industriel
    • Connaissances spécifiques : 2 ans d'expérience en système de contrôle distribués

    Expérience :
    Minimum 5 ans d'expérience en contrôle de procédés de préférence en milieu métallurgique ou chimique
    Connaissances Générales du poste Outil informatique (niveau de maîtrise : bon en Pack Office) Anglais : (niveau de maîtrise : technique) Français : (niveau de maîtrise : très bon)
    Connaissances Spécifiques du poste Logiciels : ABB 800xA V5.0, ABB 800xA V6.1, ABB CBM, Visual Basic Permis B (VL) Autres : Bonne base en infrastructure réseau, AC 800M, S800
    Aptitudes : Rigueur et méthode, Disponibilité Travail en équipe Relations interpersonnelles, Respect strict de la confidentialité Autonomie







  • We are recruiting for a Mechanical Equipment Manager - LNG for one of our client,

    Terms & Condition:

    Location of Assignment : Moscow with business trips to Krasnodar and construction sites

    Duration : 2 years

    Work Status : Resident, single

    Tentative Start Date : beginning of 2021

    Mandatory Requirements :

    • Experience as a mechanical engineer in the oil and gas industry
    • Experience with dynamic and (or) static equipment
    • Justified work experience on at least 2 LNG projects
    • Experience with equipment for LNG production (cryogenic heat exchangers, mixed refrigerant compressors, air coolers)
    • Practical knowledge of Russian and international norms and standards
    • Experience on the side of an EPC contractor in the implementation of the project.
    • Required work experience - from 10 years.
    • Personal qualities:
    • Fluency in Russian (optional) and English
    • Skill to work in team
    • Result oriented

    Job description:

    • Preliminary calculation of equipment dimensions, layout plan and cost estimate
    • Preparation of lists of equipment for LNG plants
    • Development of basic requirements for the design of mechanical equipment
    • Preparation of questionnaires for mechanical equipment
    • Analysis of noise and vibration, study of preparation for winter operation
    • Basic principles of equipment redundancy
    • Guiding the 3D model review and design analysis (HAZOP) process in mechanical disciplines
    • Using data from the supplier in the design
    • Preparation of custom specifications for the purchase of mechanical equipment
    • Preparation of evaluations of technical proposals
    • Guidance on installation, commissioning and commissioning of mechanical equipment






  • Le coordinateur des suivis réglementaires est responsable des tâches suivantes pour l'ensemble des installations :

    • Appliquer le programme d'inspection réglementaire mis en place
    • Coordonner les inspections réglementaires avec les entités concernées pour les accès aux installations et les mise hors tension
    • Assister les tierces parties durant les inspections
    • Lister et mettre en place un programme d'inspection réglementaire
    • Formaliser chaque inspection réalisée par un compte rendu de réunion, associant l'exploitant, la maintenance et la tierce partie afin de lister les écarts, les actions correctives et les responsables des corrections ,obtient le rapport provisoire ( à la fin de chaque inspection), classifier la criticité des réserves / remarques identifiés.
    • S'assurer que les anomalies ou absence de contrôles et de tests sont bien listés en réserves/ remarques
    • Collecter les rapports finaux des tierces parties et les gérer
    • Tenir à jour les registres réglementaires et les documents associés (Dossiers techniques des ouvrages)
    • Gérer les réserves émises par les tierces parties, en vérifier les bonnes exécutions et en faire valider la réalisation par les tierces parties (mise à jour de son rapport)
    • Notifier les divers services avec les urgences, les écarts constatés et les erreurs d'exécution
    • Gérer l'aspect réglementaire des quelques MOC ou OT pouvant intervenir, y compris la conformité du dossier d'exécution, les levées de réserves (Y compris les remises en services après incidents /accidents)
    • Émettre les rapports de non-conformité envers les entités défaillantes
    • Proposer des solutions pour corriger les non conformités et support technique si nécessaire
    • Réviser les procédures techniques suivant les évolutions techniques normatives et les soumettre au responsable du service pour validation
    • Produire un état hebdomadaire de la situation des réserves par zone/ criticité et discipline
    • Gérer l'application stricte de la matrice RASCI pour les tâches lui incombant
    • Émissions des rapports REX
    • Dans le cas d'une gestion directe d'entreprise extérieure pour les levées de réserves , mise en place de réunion périodique afin de considérer les aspects sécurités , qualités , performance et progrès.
    • Assister et vérifier que la documentation réglementaire attachés aux équipements et composants commandés par est complète, et correspond bien à la livraison.
    • Coordination des activités de mises en condition et des essais préalable aux inspections et tests avec les services opérations et maintenance des diverses entités de l'usine, en particuliers pour les tests occasionnant des déclenchements des installations.
    • Coordination au jour le jour les différentes bases de données du service et produit hebdomadairement les rapports des activités de l'équipe
    • Coordination avec le service HSEQR pour les relations réglementaires avec les autorités et les problèmes HSE
    • Coordination avec les services maintenance de l'usine pour la bonne réalisation des travaux liés aux observations.
    • Assister les exécutants des travaux de levées des réserves suivant les besoins exprimés
    • Assister les services de la gestion de la sécurité concernant les travaux à caractère réglementaire
    • Assister le service achat et le magasin concernant la documentation réglementaire exigée pour les équipements et composants électriques
    • Coordination avec les organismes de contrôle
    • Supervision des actions réglementaires déléguées par la maintenance
    • Assistance à HSEQR pour les relations avec les autorités de Nouvelle Calédonie
    • Assistance aux entreprises extérieures pour la gestion de leurs équipements.
    • Coordination des activités de mises en condition et des essais préalable aux inspections et tests avec les services opérations et maintenance des diverses entités de l'usine, en particuliers pour les tests occasionnant des déclenchements des installations.
    • Coordination au jour le jour les différentes bases de données du service et produit hebdomadairement les rapports des activités de l'équipe
    • Coordination avec le service HSEQR pour les relations réglementaires avec les autorités et les problèmes HSE
    • Coordination avec les services maintenance de l'usine pour la bonne réalisation des travaux liés aux observations.
    • Assister les exécutants des travaux de levées des réserves suivant les besoins exprimés
    • Assister les services de la gestion de la sécurité concernant les travaux à caractère réglementaire
    • Assister le service achat et le magasin KNS concernant la documentation réglementaire exigée pour les équipements et composants électriques
    • Coordination avec les organismes de contrôle
    • Supervision des actions réglementaires déléguées par la maintenance
    • Assistance à HSEQR pour les relations avec les autorités de Nouvelle Calédonie
    • Assistance aux entreprises extérieures pour la gestion de leurs équipements.

    Profil :

    De Formation à minima technicien supérieur
    Solide expérience professionnelle de la gestion de la conformité réglementaire et des vérifications et contrôles qui y sont attachés
    Bonnes connaissances des normes électriques, ATEX et foudre (locale et française)
    Très bonne maitrise du français et compréhension de l'anglais technique
    Connaissance et usage courant des logiciels Word - Excel - Power Point - Outlook - - Adobe Pro, SAP serait un plus
    Solide expérience des systèmes du processus gestion des systèmes QC







    • Management of all aspects of process equipment in compliance with relevant Company requirements and applicable law.
    • Verification of availability at a Fabrication Contractor of a reliable plan and resources to accomplish works on prefabrication of components, on-site fabrication, testing, preservation, shipment and handover of modules.
    • Work with field design and fabrication teams to verify and approve all Contractor's work results. Enforcement of compliance with specifications, standards and schedules.
    • Identification and highlighting of all possible risks, opportunities or threats that may positively or negatively impact quality or project tasks. Assistance in development and implementation of action plans for unexpected circumstances to the extent necessary to maintain required work rate.
    • Development and update of weekly/monthly reports on operation performance to control Key Performance Indicators (KPI) and critical data analysis.
    • Assistance in review and timely authorization of technical deviation requests.
    • Supervision and reporting within the discipline framework.
    • Supervision of contractor's work within a relevant discipline.
    • Safe and efficient supervision over all aspects of on-site fabrication activities.
    • Introduction of lessons learned


  • [Finland, Finland ]




    General and technical background expected:

    • Engineering degree or business school diploma
    • Previous working experience in a Project Management team or in a consulting firm

    Technical skills required:

    • Very good knowledge in Microsoft Office package, especially Excel and Powerpoint.
    • Very good analysis and synthesis skills
    • Ability to work effectively in multi-disciplinary teams
    • Familiar with database management.
    • Lean management certification is a plus

    Job Description

    • Participate to the definition and implementation of Key Performance Indicators (KPI);
    • Perform KPI based analysis and track their evolution and relevance along project duration;
    • Alert the project about deviations observed and support the identification and proposal of recovery areas to management with relevant actions;
    • Participate to the preparation and delivery of PMO reports (internal and external);
    • Participate to the production of high level presentations of the project (internal and external);
    • Participate to the reinforcement of link between management and operational field and strengthen technical communication
    • Participation in the implementation of lean management tools

    Languages (Level):

    • The ability to communicate in English verbally and in writing, at a professional working level
    • Communication skills & personal motivation are key in order to work as an effective team member in a stressful environment.






  • Scope (including main skills):

    The tasks as PTW Officer I&C will be:
    * Technical clarification of work orders / Permits to test and creation and validation of blockings / simulations.
    * Execution of blockings and simulations.
    * Oversee In-field operator teams for establishing safe work conditions (equipment alignment, depressurizing, de energising, locking and tagging)
    * Coordinate activities with Operating, Construction, Installation and Commissioning units
    * Prepare Permit to Work documentation and ensure strict compliance

    Needed skills:

    Required:
    * Engineering degree, or experienced technician.
    * 5 years' experience in nuclear power plants
    * 5 years' experience with instrumentation work orders and simulations.
    * Detailed knowledge about the I&C documentation.
    * Ability to work on the different I&C diagrams, preparation of solution and support for inventories in the field
    * General understanding of mechanics, thermodynamics, fluid mechanics, and measurement/instrumentation technology
    * General understanding in electrical technology
    * Computer literacy in MS-Office

    Desired:
    * Ability to use the different project data bases, software etc.

    Technical:
    * Knowledge about EPR technology
    * Working experience in Permit to work offices

    Languages (Level): English (fluent)
    * Ability with French, German or Finnish would be a plus.



  • [Abu Dhabi, United Arab Emirates (UAE) ]




    We are recruiting for a Commercial Analyst ( Energy OR Power OR Water Sector Mandatory Experience ) for one of our Clients

    Terms & Condition:

    Work Assignment : Contract Hire ( to work for the Client through MPH )

    Duration : 1 year renewable

    Work Location : UAE

    Work Status : Resident

    JOB REQUIREMENTS :

    • Bachelor Degree in a relevant field such as Economics, Mathematics, Engineering
    • Master Degree in a relevant field is preferable
    • Expert modelling and analytical skills primarily in Excel.
    • Minimum of 3 years of varied experience in energy, power or water sector commercial/trading activities
    • Knowledge of economics and commercial pricing principles and methodologies
    • English language is mandatory; Arabic is preferable
    • Experience using the outputs of Plexos and/or other optimisation programmes used in the energy sector (desirable)
    • Understanding of the Gulf region and the sector in Abu Dhabi (desirable)

    JOB SUMMARY:

    The Commercial Analyst (CA) is responsible for supporting the Commercial Team primarily across four main activities:
    1. The charges to be applied to COMPANY's power and water customers
    2. The forecasting of PWPA and related costs for budgeting and planning purposes
    3. Exchange synergies (e..g. swaps or tolling agreements) with other power/water players in the UAE
    4. Short term trading arrangements with other players within and outside the UAE.

    MAIN ROLES AND RESPONSIBILITIES:

    1 - Support the development and implementation of charges:

    The Bulk Supply Tariff (BST) to COMPANY's Distribution customers including the annual tariff-setting process, within-year implementation and future enhancements to the methodology.

    Long-term supply agreements to other large power and water customers, based on an understanding of their willingness to pay, in order to maximize COMPANY's profitability and send price signals to the sector to drive appropriate behaviour.

    The CA supports the tariff-setting process, running ad-hoc impact analysis, developing pricing structures and Willingness-to-Pay models in Excel and potentially running/interpreting scenarios using Plexos (COMPANY's planning tool).

    2 - The development of 5-year forecasts for all power and water costs (excluding fuel and business costs) to support COMPANY's annual budgeting process and the annual BST setting process. Quarterly updates as required for internal reporting cycle.

    The CA is required to liaise with Finance, Planning and Forecasting, and Procurement to develop robust cost estimates for the PWPA-related costs that are key components of the 5-year business plan.

    3 - Exchange synergies (e..g. swaps or tolling agreements) and origination support for commercial arrangements with other power/water players in the UAE.

    The CA supports the assessment of commercial activities, run financial models, developing pricing models in Excel and running/interpreting scenarios using Plexos. He/she also support COMPANY's trading activities in existing/future trading platforms.

    4 Analysis support for major sector initiates such as new unlicensed customer sales, or mergers, interconnection arrangements, green certification, or any other transaction that has effect on costs, revenues or demand, based on existing benchmark models.

    - Reporting

    The CA provides monthly report to the Commercial Manager on the actual commercial performance of the team and keeps the activity results monitored and auditable. He/She supports the fuel and commercial team with the assessment of the financial impacts of the different deals, before, during and after their execution.



  • [Basel, Switzerland ]




    As part of the CQV Team reporting to the CQ Manager main responsibilities and tasks of the incumbent includes but are not limited to:

    • Attendance at Factory Acceptance Tests for key process equipment
    • Execution of Walk Down of mechanically complete (MC) systems
    • Execution of Installation Verification (IQ)
    • Execution of Operational Verification (OQ)
    • Compliance with schedule
    • Safety Compliance

    Qualification & Experience Requirements

    • Education (minimum/desirable): Minimum BS or equivalent in Engineering or Science - preferably in Automation, Chemical, Mechanical or Pharmaceutical Engineering.
    • Experience in Commissioning and Qualification of Clean Utilities and gasses.
    • Experience in Commissioning and Qualification for the following equipment:
    • Single Use Mixers.
    • Tangential Flow Filtration.
    • COTS (freezers, fridges, probes (pH and UV))
    • Languages: English - Essential fluent in speaking and writing. German - advantageous.
    • Experience: Minimum 10 yrs.
    • Broad knowledge of engineering disciplines, commissioning, compliance, qualification and validation.
    • Excellent knowledge of Validation processes (IQ/OQ/PQ) and current regulatory requirements related to E2500 and ISPE 2004.
    • Experience working within a GMP manufacturing environment.


  • [Basel, Switzerland ]




    Supporting assigned project in Visp as CQV-Lead:

    • Managing CQV Engineers
    • Interaction with PM / Engineering / QA
    • Generating and Planning the CQV timelines with PM
    • Define and assign the needed amount of needed CQV staff
    • Close interaction with Process Engineers, PM and QA
    • Leading the assigned CQV Team
    • Forcing the Company CQV Approach during the entire project






  • Scope

    Within the project, inside Commissioning Department under the Branch Managers responsibility, the main duties of the Commissioning Engineer for Aux/Waste handling and process systems are the following:

    • Independent performance of Commissioning of the assigned system according to System Commissioning Program and Commissioning Instruction independent or within a team.
    • Creation and delivery of related Test Reports for the Client in a predefined format including internal coordination with Technical Commissioning and Quality Department.
    • Progress coordination within the assigned system between the different departments on site needed for system to be handed over to the Client (Interface Departments: Maintenance, Electrical Commissioning, I&C Commissioning, Construction)
    • Progress follow up and Reporting to Section Lead (or Branch Manager) with respect to Project Schedule

    Main skills

    • Engineer Degree in mechanical- or process-engineering (or comparable e.g. technician with certain proven experience)
    • At least 2 years field experience in nuclear power plant or preliminary working period within nuclear project. Oil & Gas, shipbuilding or similar professional experience can also be considered.
    • Knowledge of process systems in EPR needed; Experience of process operation is needed; the candidate should pay attention to the details and be fully familiar with STAR attitude in Nuclear industry.
    • Proficiency in Process and Instrumentation Diagrams (P&ID's)
    • Experience in Logic Diagrams for signal Processing would be a plus
    • Good MS office knowledge
    • Document writing capacity (fluent in English Language)
    • Versatile, Adaptable, Rigorous, Good interpersonal skills, Client & results oriented and motivated to join the project with the drive for completion






  • Scope

    Within the project, inside Commissioning Department under the Branch Managers responsibility, the main duties of the Commissioning Engineer for Aux/Waste handling and process systems are the following:

    • Independent performance of Commissioning of the assigned system according to System Commissioning Program and Commissioning Instruction independent or within a team.
    • Creation and delivery of related Test Reports for the Client in a predefined format including internal coordination with Technical Commissioning and Quality Department.
    • Progress coordination within the assigned system between the different departments on site needed for system to be handed over to the Client (Interface Departments: Maintenance, Electrical Commissioning, I&C Commissioning, Construction)
    • Progress follow up and Reporting to Section Lead (or Branch Manager) with respect to Project Schedule

    Main skills

    • Engineer Degree in mechanical- or process-engineering (or comparable e.g. technician with certain proven experience)
    • At least 2 years field experience in nuclear power plant or preliminary working period within nuclear project. Oil & Gas, shipbuilding or similar professional experience can also be considered.
    • Knowledge of process systems in EPR needed
    • Proficiency in Process and Instrumentation Diagrams (P&ID's)
    • Experience in Logic Diagrams for signal Processing would be a plus
    • MS office knowledge
    • Document writing capacity (fluent in English Language)
    • Versatile, Adaptable, Rigorous, Good interpersonal skills, Client & results oriented, attention to detail.






  • We are recruiting for a Pipelines and Piping Expert for one of our Clients

    Terms & Condition:

    Work Location : China ( fabrication yards )

    Duration : 2 years with a possible extension

    Work Status : Rotation 8 weeks ON / 2 weeks OFF / 6 days a week ( Monday to Saturday )

    Candidate Specification

    • Candidates currently based in China
    • Higher vocational (Engineering) Education / University Engineering Degree
    • Proven experience in modules fabrication, SE Asia
    • 5 years of experience in construction and fabrication of pipelines and piping
    • 10 years of experience on construction sites and similar sites on oil and gas projects.
    • Valid National Agency of Welding Control (NAKS) certificate (Level 3 or higher) or International Welding Engineer (IWE) Diploma.
    • Valid visual and dimensional testing certificate (Level 2 or higher)
    • Valid NDT certificates and knowledge assessment test certificates (radiographic testing, ultrasonic testing, magnetic particle inspection, dye penetrant inspection): Level 2 or higher (preferably)
    • At least three (3) years of experience in Quality Control as a member of multidisciplinary inspector team, including work with Quality Control plans, Inspection and Test Plans, Test Procedures and in non-conformance and deviation management
    • Production and construction experience on onshore/offshore oil and gas projects as a member of an international contractors and suppliers team, preferably in modular prefabricated buildings construction.

    Job Description

    • Supervision over Contractor's/Subcontractor's work at modules fabrication site during fabrication, assembly and Quality Control of pipelines and piping;

    • Assurance of modules manufacturing by the Contractor in compliance with approved Quality Control plans, design documentation, SNiP and Russian Legislation;
    • Expert and methodology support within the competence during Quality Control activities by Contractors/Subcontractors to assure compliance with quality requirements to fabrication of modules;
    • Monitoring of completeness, up-to-dateness and quality of permissive documents of Contractors/Subcontractors.
    • Control of the following:
    • Receipt of materials for manufacturing of pipelines and piping;
    • Fabrication of pipelines and piping in compliance with project documentation, construction rules and regulations and other norms and standards;
    • Compliance with approved sequence of process operations;
    • Timely preparation of as-built documentation;
    • Participation in:
    • Incoming control of materials arriving at construction site;
    • Inspections and tests as per approved QC plans for fabrication
    • Final acceptance of completed work
    • Verification and acceptance of as-built documentation within the competence
    • Quality Control of the work performed by the Fabrication Contractor:
    • Provision of Quality Control reports, reports on discrepancies found in facility fabrication quality and make proposals on their elimination and prevention;
    • Issuance of instructions to Contractor and control over corrective actions if necessary;
    • Timely informing the line manager about found discrepancies within the competence;
    • Preparation of weekly and daily reports on the Contractor's performance; maintenance of statistics on inspections and quality, verification of actual quality reports;
    • Informing on the circumstances which prevent proper performance of job duties;
    • Participation in meetings of Quality Control Group and contractors on issues relevant to pipelines and piping



  • [saudi, Saudi Arabia ]




    We are looking for several candidates with knowledge of Radar Ground Master 400, GM 200 in charge of :

    - Production and delivery of system and hardware problem reports (SPR and HPR), according to the model provided.

    - OJT training for the client's staff on radar system operations and maintenance,

    - Supervision system checks,

    - Responding to requests from customer personnel to troubleshoot the system,

    - Repair of the system using spare parts supplied by the customer,

    o Initial evaluation of defective parts to assess the repair/replacement decision,

    - Modification / update of the equipment limited to modifications due to technical problems and approved by Radar Design Authority (LAS France).

    Requirements :

    - Good knowledge of the radar (maintenance and operation) (GM 400, GM 200 preferably)

    - Knowledge and experience of power generation and distribution equipment (maintenance and operation);

    - Knowledge and experience with radio communication equipment (maintenance and operation);

    - Basic knowledge of unix.

    - Awareness required to carry out maintenance work (electrical authorization, authorization to work vertically, at height, etc.),

    - Be able to obtain administrative authorization for entry to military sites.

    - English Language



  • [Jeddah, Saudi Arabia ]




    We are currently looking for a Radar Technician for our client specialised in Naval defense.

    The job will be based in Saudi Arabia.

    Experience:

    Radar experience in Marine/Naval sector

    French language is mandatory



  • [Doha, Qatar ]




    Our reputed Client an Oil and Gas Company is urgently looking for a "SAP Business Analyst" in Doha Qatar.

    Terms and Conditions:

    Location: Doha Qatar

    Contract Duration: 12 Months (Subject to Renewal)

    Working Days: 5 days, 10 hrs

    Dead Line to Apply before 8th November 2020

    Qualification:

    Bachelor or Masters level degree in Business, Computer Science or a related field.

    Experience:

    • Ten years or (8) years of experience in a business environment with specific exposure in Business Process and Data Analysis relating to Project Management required, preferably in oil and gas industry. Minimum 5 years in a Senior position
    • SAP Certification in SAP relevant module (PS) would be a distinct advantage
    • Knowledge in Master data object definitions and models would be an advantage
    • Knowledge in Business Process Analysis, Modelling, Optimizing and Workflow automation.
    • Experience in business process analysis, modelling, notation, process improvement methodologies, optimization strategies and statistical process control.
    • Documentation and diagramming approaches used to describe typical business components including entity relationship diagrams, process diagrams, and workflow diagrams.
    • Good exposure of Project Management principles and practices.
    • Demonstrates a commitment to quality and continuous improvement.
    • Thorough understanding of Business Process management and ability to plan / conduct study, and document the results
    • Good inter-personal skills and excellent communication skills are required to provide the support and produce documentation.
    • A proven self-starter and team player and be able to coordinate with other team members in completing assigned tasks.
    • Expert proficiency in using MS Office suite applications and Power BI.

    Primary Duties and Responsibilities:

    • Conduct gap analysis on Business Processes to identify bottlenecks, constraints, dependencies, risks, opportunities for improvement, automation and integration
    • Develop and analyse documentation and processes to support Business processes
    • Consult with multiple business process owners to identify, define and document current operational procedures, problems, input and output requirements.
    • Maintain skills in Business process design and to enable further development of the Directorate Enterprise Architecture.
    • Conduct Fit-Gap Analysis on Business / System Process & identify / develop enhancement Documentation


  • [Doha Qatar, Qatar ]




    Our reputed Client an EPC Company is urgently looking for a "Senior Pipeline Designer" in Doha Qatar.

    Terms and Conditions:

    Location: Doha Qatar

    Contract Duration: 12 Months

    Working Days: 9 hours/day, 45/week

    Immediate Available Candidates in Qatar

    Qualification:

    Diploma in Mechanical Engineering

    Post-qualification Experience:

    More than 15 years of relevant experience in design & detailed engineering related to Oil & Gas (Onshore & Subsea) Pipelines.

    Job Specification:

    The requirement is to provide conceptual, basic, FEED and detailed engineering and design expertise related to Pipelines associated with small & medium sized capital projects in Petroleum and Natural gas related industries.

    Job Skills:

    • Highly Conversant with ACAD.
    • Reasonable Exposure in Micro-station.
    • Preparation and Checking of Route maps, Alignment sheets, Crossing details, Approach drawings, Isometrics and associated miscellaneous details.
    • Preparation and Checking of Pipe support drawings and Support Schedule.
    • Preparation and Checking of Tie-in Schedule, Piping MTO and Pipe support MTO.
    • Vendor drawing review.
    • Onshore / Offshore Site survey and preparation of Site survey report.
    • Coordination with clients, vendors, subcontractors & other internal disciplines.
    • Resolution of site/field/construction contractor queries.
    • Capable of work allocation and guiding a team of draftspersons.
    • Good written & oral communication skills of English language as necessary for performing the above tasks.
    • CO2 Pipeline experience will be preferred.






  • We are recruiting for a Head of Materials & Welding for one of our client,

    Terms & Condition:

    Location of Assignment : Doha, Qatar

    Work Assignment : Contract Hire ( to work for the CLIENT through MPH )

    Duration : 4 years

    Work Status : Resident, 6 days a week / 10 hours a day

    Job Requirements :

    • 20 Years Relevant Experience
    • Experience working with an Operator
    • GCC experience
    • With experience working as Head, Manager or Lead roles






  • Nous recherchons plusieurs candidats avec les expériences suivantes :

    • Expérience obligatoire en sous-marin (ancien militaire)
    • Mise en service (pendant la phase d'installation)
    • Sous-marin Scorpène, Sous marin nucléaire d'attaque SNA

    Date de début : 2021
    Lieu : confidentiel







  • Scope

    Within the project, inside Commissioning Department under the Branch Managers responsibility, the main duties of the Commissioning Engineer for Aux/Waste handling and process systems are the following:

    • Independent performance of Commissioning of the assigned system according to System Commissioning Program and Commissioning Instruction independent or within a team.
    • Creation and delivery of related Test Reports for the Client in a predefined format including internal coordination with Technical Commissioning and Quality Department.
    • Progress coordination within the assigned system between the different departments on site needed for system to be handed over to the Client (Interface Departments: Maintenance, Electrical Commissioning, I&C Commissioning, Construction)
    • Progress follow up and Reporting to Section Lead (or Branch Manager) with respect to Project Schedule

    Main skills

    • Engineer Degree in mechanical- or process-engineering (or comparable e.g. technician with certain proven experience)
    • At least 2 years field experience in nuclear power plant or preliminary working period within nuclear project. Oil & Gas, shipbuilding or similar professional experience can also be considered.
    • Knowledge of process systems in EPR needed; the candidate should pay attention to the details and be fully familiar with STAR attitude in Nuclear industry.
    • Proficiency in Process and Instrumentation Diagrams (P&ID's)
    • Experience in Logic Diagrams for signal Processing would be a plus
    • Good MS office knowledge
    • Document writing capacity (fluent in English Language)
    • Versatile, Adaptable, Rigorous, Good interpersonal skills, Client & results oriented, attention to detail and motivated to join the project with the drive for completion