Current openings
Search by industry:
Search by country:
Search by city:
  • Openings
    Location




  • Nous recherchons plusieurs candidats avec les expériences suivantes :

    • Expérience obligatoire en sous-marin (ancien militaire)
    • Mise en service (pendant la phase d'installation)
    • Sous-marin Scorpène, Sous marin nucléaire d'attaque SNA

    Date de début : 2021
    Lieu : confidentiel



  • [Doha, Qatar ]




    15 Years Experience

    Offshore project

    Experience working with an Operator

    GCC experience



  • [Olkiluoto, Finland ]




    We are currently looking for a Mechanical PTW Officer a Nuclear Power Plant.

    Terms and conditions:

    Job Location : Finland

    Type of Assignment : Contract hire - Resident

    Duration : Until 31/01/2022

    Work Schedule : 5 days per week (Monday to Friday)

    Accommodation : Studio or 1 bedroom and living fully furnished and equipped in either Pori or in Rauma (Single Accommodation)

    Local Transportation : Provided

    Medical Coverage : Provided

    Mob/Demob Tickets : Provided

    Scope (including main skills):

    The tasks as mechanical PTW officer will be:

    • Technical clarification of work orders / Permits to test and creation and validation of blockings / simulations.
    • Execution of blockings and simulations.
    • Oversee In-field operator teams for establishing safe work conditions (equipment alignment, depressurizing, de-energising, locking and tagging)
    • Coordinate activities with Operating, Construction, Installation, Maintenance and Commissioning units
    • Prepare Permit to Work documentation and ensure strict compliance

    Required:

    • Mechanical engineering degree or Diploma, or experienced qualified journeyman/craftsman/tradesman.
    • 5 years' relevant experience in power plants, oil and gas plants, manufacturing plants
    • 5 years' experience with mechanical work orders and blockings as user or 2 years as provider.
    • Detailed knowledge about the mechanical process documentation.
    • Ability to work on the different process diagram, isometrics, preparation of solution and support for inventories in the field
    • General understanding of mechanics, thermodynamics, fluid mechanics, and measurement/instrumentation technology
    • General understanding in electrical technology
    • Computer literacy in MS-Office






  • We are looking for a Quality Control Inspector ( CCTV, Security System )

    Work Location : Qatar
    Duration : 3 months extendable
    Work status / Schedule : Resident, Single. 5 - 6 days a week

    ** With Qatar Driver's License

    ** Can join immediately or at least with 2 weeks notice

    KEY ACCOUNTABILITIES :

    > Carry out quality inspections at site as per project requirements:
    - Material Inspection
    - Test Inspections
    - Work Inspection

    > Coordination with PMC and subcontractor quality personnel.
    > Maintaining QA/QC logs and records for monitoring and control.
    > Report non-conformances and deviations to higher authority.
    > Preparation of daily/weekly/monthly quality reports.







  • Scope

    Within project, inside Commissioning Department under the Branch Managers responsibility, the main duties of the Commissioning Engineer for Aux/Waste handling and process systems are the following: (Later on applicable to NSSS branch also)

    • Independent performance of Commissioning of the assigned system according to System Commissioning Program and Commissioning Instruction independent or within a team.
    • Creation and delivery of related Test Reports for the Client in a predefined format including internal coordination with Technical Commissioning and Quality Department.
    • Progress coordination within the assigned system between the different departments on site needed for system to be handed over to the Client (Interface Departments: Maintenance, Electrical Commissioning, I&C Commissioning, Construction)
    • Progress follow up and Reporting to Section Lead (or Branch Manager) with respect to Project Schedule

    Will start in BNI1 Waste for 4-5 Months then will work for NSSS ( Nuclear Steam Supply System)

    Main skills

    Engineer Degree in mechanical- or process-engineering (or comparable e.g. technician with certain proven experience)

    • At least 2 years field experience in nuclear power plant or preliminary working period within nuclear project. Oil & Gas, shipbuilding or similar professional experience can also be considered.
    • Good knowledge of process systems in EPR/Pressurized water reactor needed
    • Capability to understand Process and Instrumentation Diagrams (P&ID's)
    • Experience in Logic Diagrams for signal Processing would be a plus
    • MS office knowledge
    • Document writing capacity (fluent in English Language)
    • Versatile, Adaptable, Rigorous, Good interpersonal skills, Client & results oriented, attention to detail.






  • Scope

    Within the project, inside Commissioning Department under the Branch Managers responsibility, the main duties of the Commissioning Engineer for Aux/Waste handling and process systems are the following:

    • Independent performance of Commissioning of the assigned system according to System Commissioning Program and Commissioning Instruction independent or within a team.
    • Creation and delivery of related Test Reports for the Client in a predefined format including internal coordination with Technical Commissioning and Quality Department.
    • Progress coordination within the assigned system between the different departments on site needed for system to be handed over to the Client (Interface Departments: Maintenance, Electrical Commissioning, I&C Commissioning, Construction)
    • Progress follow up and Reporting to Section Lead (or Branch Manager) with respect to Project Schedule

    Main skills

    • Engineer Degree in mechanical- or process-engineering (or comparable e.g. technician with certain proven experience)
    • At least 2 years field experience in nuclear power plant or preliminary working period within nuclear project. Oil & Gas, shipbuilding or similar professional experience can also be considered.
    • Knowledge of process systems in EPR needed; the candidate should pay attention to the details and be fully familiar with STAR attitude in Nuclear industry.
    • Proficiency in Process and Instrumentation Diagrams (P&ID's)
    • Experience in Logic Diagrams for signal Processing would be a plus
    • Good MS office knowledge
    • Document writing capacity (fluent in English Language)
    • Versatile, Adaptable, Rigorous, Good interpersonal skills, Client & results oriented, attention to detail and motivated to join the project with the drive for completion


  • [Paks, Hungary ]




    JOB DUTIES

    • Organization of a medical office from scratch
    • Organization and provision of medical care for employees and family members;
    • Interaction with government agencies in Hungary in terms of health care;
    • Interaction with insurance companies, clinics and other structures;
    • Providing prophylaxis to prevent new coronavirus infection
    • Organization of seasonal vaccinations
    • Organization of primary and scheduled medical examinations for employees and candidates
    • Ensuring the activities of the branch in accordance with the medical standards of the country
    • Linguistic support and medical support of employees when visiting doctors
    • Participation in the procurement procedures for medical insurance
    • Provision of primary honey. advice and assistance to branch employees

    REQUIREMENTS

    • Knowledge of Russian and Hungarian language
    • Availability of the necessary licenses for issuing disability certificates and prescriptions
    • Knowledge of the insurance medicine market (what are the health insurance suppliers)
    • Experience of interacting with private and state medical institutions
    • Knowledge of the pricing system for medical services
    • Higher medical education
    • 3-6 years of work experience


  • [Paks, Hungary ]




    Job duties

    • Prepare and organize the timely submission of a package of documents for the hungarian migration service in order to obtain work permits and residence permits of foreign citizens on the territory of hungary within the prescribed period;
    • Prepare a package of documents for obtaining tax and insurance numbers for employees;
    • Provide methodological support to candidates on the issues of registration of migration documents;
    • To interact with the translation agency "orn" on the organization of notarized translations for the migration service within the framework of their duties;
    • To prepare drafts of labor contracts for candidates required for submission of documents to the migration service;
    • Build a map of migration processes in accordance with hungarian legislation
    • Provide migration support to employees of subsidiaries and affiliates
    • Advise on hungarian labor law

    Requirements

    • Knowledge of migration processes in hungary
    • Experience of work with state authorities
    • Work experience in the legal field or hr in the field of labor relations management
    • Experience in international projects, in an international team



  • [Eurajoki, Finland ]




    Terms & Conditions:

    Duration: till May 2021

    Accomodation and transportation: provided

    1. Reports to

    Section Leader BNI2 / HVAC Commissioning

    1. Function

    Commissioning Engineer for HVAC Commissioning

    Tasks:

    • Planning and follow-up of commissioning activities (scheduling, supplier coordination, open points closure)
    • Prepare and review commissioning test instructions, including coordination of review and approval process with client and regulator
    • Coordination of maintenance, commissioning, PSM, OIO and TVO interfaces for assigned systems
    • Safety perform test activities according to the commissioning schedule
    • Document test results by preparing commissioning test reports, including the collection of test data records/plots and Results Record Sheets.
    • Perform miscellaneous emergent commissioning items to support the Mechanical Commissioning Branch team objectives
    1. Language
    • Fluent English required.
    • Ability with French, German, and/or Finnish would be a plus.
    1. Qualification

    Required:

    • Engineering degree required in one of the following disciplines: nuclear or electrical
    • At least 6 yrs nuclear plant/industry experience.
    • Flexibility in working time due to the commissioning schedule necessities
    • Proficiency with Microsoft Office Suite and Documentum
    • Advanced knowledge about nuclear power plant startup test activities (technically, organizational), including standard test equipment
    • Basic management experience: ability to coordinate system commissioning activities with other team members (mechanical and I&C technicians)

    Desired

    • Knowledge of Pressurized Water Reactor (PWR) systems.
    • Commercial nuclear plant (PWR) operational or test experience.
    • Experience in system design engineering (especially fluid systems)
    • Advanced knowledge about nuclear power plant startup test activities (technically, organizational)


  • [Finland, Finland ]




    Job Title: Plant Status Management (PSM) Time Scheduler

    Tasks:

    • Gathering of all tasks from Commissioning, Construction, Maintenance, Operation
    • Linking of these tasks in a logical way in order to achieve a short remaining project duration
    • Perform time schedule simulations
    • Deliver the mechanical level 1 and level 2 schedules for the project
    • Propose/define changes in the planning sequences in order to:
    • Fulfil the technical specifications
    • Get a more appropriate sequence for the project progress
    • Looking in the future to detect and remove obstacles in time.
    • Participation at the PSM and branch meetings
    • Supervision of the project progress
    • Deliver project KPI's
    • Creation of the 3-days-program

    Tools

    • Integrated master schedule in Primavera

    Other Points:

    - Working organization:

    • The work week period is based on 5 days from Monday to Friday

    Language:

    • Fluent English required,

    Skills required:

    • Experience as time scheduler
    • Build-up of logical sequences.
    • Structuring of time schedules.
    • Time schedule simulations
    • Capable to recommend reasonable decisions

    Technical:

    • MS Project
    • Primavera
    • Reporting tools


  • [Doha, Qatar ]




    Our client, major player in Power Generation industry, is urgently looking for a "Planning Engineer"

    Terms and Conditions
    Location: Doha Qatar
    Status: Single, Resident
    Duration of contract: 6 Months
    Visa+ Demob tickets: Provided
    Medical Insurance: Provided

    Job requirements:
    Some with experience in Karama projects

    Interested Candidate, Kindly Apply.







  • Our client, major player in gas processing and oil refining industry, is urgently looking for a "Construction Design Manager"

    Terms and Conditions
    Location: Moscow with business trips to Krasnodar and construction sites
    Status: Single, Resident
    Duration of contract: 2 Years
    Visa+ Mob+ Demob tickets: Provided
    Medical Insurance: Provided
    Accommodation: provided

    Job requirements:
    Qualifications and experience:
    Experience as a design engineer in the oil and gas industry
    Justified work experience on at least 1 LNG project
    Work experience related to modular construction, explosion protection and protection against spills of cryogenic liquids
    Practical knowledge of Russian and international norms and standards
    Experience on the side of an EPC contractor
    Required work experience - from 10 years
    AVEVA 3D, TEKLA

    Personal qualities:
    Fluency in English, Russian will be an advantage
    Skill to work in team
    Result oriented

    Job description:
    Preliminary calculation of the dimensions of metal structures, layout plan, Material & Logistics management and cost estimation
    Interpretation of geotechnical reports and engineering surveys for inclusion in design
    Design of foundations and pile foundations (including for LNG storage tanks)
    Calculations for explosion resistance and analysis of structural collapse as a result of fire
    Structural drawings for onshore and offshore structures (pipeline racks, buildings, modules, topsides)
    Basic requirements for the design of buildings (substations, control rooms, etc.)
    Guidance in the process of 3D model review and design analysis as applied to building structures
    Weight control and optimization through increased cost efficiency
    Preparation of technical specifications as part of the conclusion of contracts for the factory production of structures
    Use of data (on loads) from the supplier in the design
    Guidance in the process of manufacturing structures at a factory, construction site or shipyard.

    Interested Candidate, Kindly Apply.







  • We are recruiting for a Mechanical Equipment Manager - LNG for one of our client,

    Terms & Condition:

    Location of Assignment : Moscow with business trips to Krasnodar and construction sites

    Duration : 2 years

    Work Status : Resident, single

    Tentative Start Date : beginning of 2021

    Mandatory Requirements :

    • Experience as a mechanical engineer in the oil and gas industry
    • Experience with dynamic and (or) static equipment
    • Justified work experience on at least 2 LNG projects
    • Experience with equipment for LNG production (cryogenic heat exchangers, mixed refrigerant compressors, air coolers)
    • Practical knowledge of Russian and international norms and standards
    • Experience on the side of an EPC contractor in the implementation of the project.
    • Required work experience - from 10 years.
    • Personal qualities:
    • Fluency in Russian (optional) and English
    • Skill to work in team
    • Result oriented

    Job description:

    • Preliminary calculation of equipment dimensions, layout plan and cost estimate
    • Preparation of lists of equipment for LNG plants
    • Development of basic requirements for the design of mechanical equipment
    • Preparation of questionnaires for mechanical equipment
    • Analysis of noise and vibration, study of preparation for winter operation
    • Basic principles of equipment redundancy
    • Guiding the 3D model review and design analysis (HAZOP) process in mechanical disciplines
    • Using data from the supplier in the design
    • Preparation of custom specifications for the purchase of mechanical equipment
    • Preparation of evaluations of technical proposals
    • Guidance on installation, commissioning and commissioning of mechanical equipment


  • [Kuala Lumpur, Malaysia ]




    Job Context & Major Challenge(s)

    • Reviews the FEED design developed by the Contractor and verify compliance with Company standards and Company objectives
    • Identify where existing equipment can be used and utilize existing designs and equipment where practical and fit for purpose
    • Understand and communicate the requirements of FEED design
    • Efficiently translate Company requirements and data into an efficient delivery from the Contractor
    • Manage the Contractor in the safe delivery of FEED scope of work for pipeline components
    • Verify compliance with Company requirements, standards, specifications and instructions
    • Monitor the progress and delivery of the engineering sections of the work scope

    Duties:

    • Manage the pipeline scope as focal point and ensure all deliverables are met in respect to time, cost and performance to ensure project requirements are met in the design.
    • Collaborate with Project teams to provide expertise, advice, guidance and to implement recommendations and operating procedures as required
    • Ensure that all elements of Pipeline Integrity data are captured and managed effectively to support the project an ongoing operational needs
    • Ensure familiarity with GIS to monitor Contractor development of the GIS database.
    • Provide constructability input into the design and coordinate with onshore and offshore construction teams to ensure effective implementation of pipeline engineering deliverables.
    • Support the development and maintenance of pipeline engineering related procedures and best practices as needed and review design changes, specification revisions and exceptions to ensure compliance to the Project Management f Change (PMOC) processes.
    • Support engineering aspects of the Risk Management Plan (including emergency response and business continuity) to ensure identified hazards/risks are mitigated and to maintain the expected level of quality and safety as defined in the Quality Assurance and Safety Management Plans.

    Minimum Requirements

    • Bachelor Degree in Metallurgy, Mechanical, Chemical Engineering or equivalent.
    • Knowledge and/or Experience
    • 15+ years of experience in offshore pipeline engineering with at least five years demonstrated senior engineering experience in major capital projects
    • Experience with EPC contractors, sub-contractors and vendors involved in the oil and gas industry


  • [Doha, Qatar ]




    1. Minimum 12 years relevant post graduate experience, of which 8 years in Oil & Gas industry with an international consulting company, EPIC contractor or Operating Company. Possess sound fundamentals in his discipline area. Shall possess very good technical skills in his discipline.
    2. Experience in operations, maintenance and projects' pre-commissioning, commissioning, start up and Hand-over activities.



  • [Tashkent, Uzbekistan ]




    • BS degree from related engineering department (Geology-Geophysics).
    • Minimum 2 years of professional experience is required in the field of geological mapping, engineering geological/geotechnical works, geophysical investigations, or hydrogeological analyses.
    • MS Degree in Geology Engineering is preferred.
    • Experience in geotechnical drilling.
    • Strong verbal and written communication skills in English, Russian and Uzbek are required.
    • Perform geological studies in support of geology, earthquake hazard, engineering geology, and geotechnical engineering studies.
    • Follow up field exploration, field and lab testing processes.
    • Willingness to travel and supervise field work.
    • Experience in preparing technical reports, memo and proposal is preferred.
    • High skill in being a competent technical writer is preferred.
    • Experience with Microsoft Office applications is required.
    • Field experience is a plus.
    • Strong communication skills, enthusiasm, open to learn, and a positive attitude is a plus.
    • AutoCAD skill is a plus
    • Experience in geophysical investigation is a plus


  • [Tashkent, Uzbekistan ]




    Location: Tashkent, Uzbekistan

    Duration: Long term/ Permanent

    Work hours: 8 hours/ 5 days a week

    Interfaces

    • Developing new opportunities with potential client and partner organisations.
    • Working as part of a design team to lead and delivery detailed design projects
    • Attending a range of project group and technical meetings
    • Obtain from client and provide a clear and accurate brief to design office engineering team
    • Visit design office with design briefing and partake in conference calls with design office engineers to discuss/review project
    • Review deliverables from design office in accordance with briefing requirements sent to them.
    • Provide technical audit of deliverables from design office
    • Present design proposals/solutions to client and design team
    • Prepare specifications and co-ordinate with all other documentation
    • Sign-off engineering documents/schedules/drawings/calculations received from design office
    • Use computer assisted project software for both project related calculations and products.
    • Ensure document control methods are being adhered to and quality control standards are being achieved
    • Contribute to development of quality and technical standards within the office

    Responsibilities & Duties

    Hands on experience with:

    • Protection Signalling
    • Provision of redundant FSK coded tele-protection signals on independent channels on the new EHV overhead transmission lines.
    • Data communication
    • Provision of necessary interfaces in the telecommunication equipment for transmission of data channels.
    • Equipment Specifications of:
    • Power line carrier (PLC) communication and protection signalling equipment for transmitting speech and tele-protection channels for overhead transmission line.
    • Coupling equipment comprising line traps, coupling capacitor voltage transformers, line matching units and carrier frequency cable, for connection of the carrier equipment with the transmission lines.
    • New single﷓channel PLC SSB sets with swing rack cabinets and all other material required for complete installation.
    • New protection signalling equipment for installation in the PLC cabinets.
    • Coupling equipment consisting of LTs and CCVTs.
    • LMUs for inter﷓circuit coupling with coupling filters, hybrid transformer, protection circuits and all materials required for complete installation.
    • HF cable to connect LMUs with associated PLC terminals and with each other.
    • Augmentation required at remote control centre of utility.
    • Signal to Noise Ratio Calculations in line with IEC 663 "Planning of (single sideband) power line carrier systems", detailing coupling equipment, line attenuation and any other losses to show that the proposed equipment on each PLC link.
    • Telephone channels two-way (fully duplex) telephone channel shall be suitable for four wire working at transit stations, as determined by the requirements of the telephone scheme.
    • Voice frequency telegraph (VFT) channels
    • Equipment Service conditions with IEC recommendation 495.
    • Specification of telecom cubicles in line with IEC 529.
    • Tele-protection Channel Requirements
    • Duplicated permissive protection set-1 and set-2 (for distance protection).
    • Duplicated direct protection (for breaker failure and over voltage protection).
    • Equipment Functions to receive coded frequency shift keyed FSK signals to be used in conjunction with the protective relaying and shall be suitable for the transmission of permissive tripping and direct inter-trip (breaker failure) signals suitable for operation with the protective gear at the substations.
    • PAX Equipment of digital stored program control type employing Pulse, Code Modulation (PCM) and Time Division Multiplexing (TDM) type, complying to the relevant recommendations of the CCITT.
    • PABX SYSTEM specification for substation & residential colony for the purposes of Administrative Traffic complying with the recommendations for ISDN system by the CCITT.
    • Design and Specification of Main Distribution Frame (MDF) an interface between the exchange and the cable network to the subscribers
    • Design, Specification and review of vendor drawings of Remote Terminal Unit (RTU) for Data Acquisition of Indications, Analog Values, Alarm Indications, and Control Orders to/from control centre to substation process level.
    • 48 volt DC power supply requirements for all of the PLC, tele-protection, SCADA and telephone equipment.

    Profile

    The ideal candidate will be a Chartered Engineer or working towards, educated to degree level in Telecom Engineering or equivalent and hold membership of relevant institutions.

    Education

    A electrical engineering graduate with specialization in Telecom/Electronics

    Experience

    A minimum of 7 years' industry experience with the ability to run large projects and undertake a client facing role in the development, design and co-ordination of engineering

    Specific Requirement

    Working knowledge of IEC61850, IEC 529 and IEC663 protocols.







  • We are recruiting for a Pipelines and Piping Expert for one of our Clients

    Terms & Condition:

    Work Location : China ( fabrication yards )

    Duration : 2 years with a possible extension

    Work Status : Rotation 8 weeks ON / 2 weeks OFF / 6 days a week ( Monday to Saturday )

    Candidate Specification

    • Higher vocational (Engineering) Education / University Engineering Degree
    • Proven experience in modules fabrication, SE Asia
    • 5 years of experience in construction and fabrication of pipelines and piping
    • 10 years of experience on construction sites and similar sites on oil and gas projects.
    • Valid National Agency of Welding Control (NAKS) certificate (Level 3 or higher) or International Welding Engineer (IWE) Diploma.
    • Valid visual and dimensional testing certificate (Level 2 or higher)
    • Valid NDT certificates and knowledge assessment test certificates (radiographic testing, ultrasonic testing, magnetic particle inspection, dye penetrant inspection): Level 2 or higher (preferably)
    • At least three (3) years of experience in Quality Control as a member of multidisciplinary inspector team, including work with Quality Control plans, Inspection and Test Plans, Test Procedures and in non-conformance and deviation management
    • Production and construction experience on onshore/offshore oil and gas projects as a member of an international contractors and suppliers team, preferably in modular prefabricated buildings construction.

    Job Description

    • Supervision over Contractor's/Subcontractor's work at modules fabrication site during fabrication, assembly and Quality Control of pipelines and piping;

    • Assurance of modules manufacturing by the Contractor in compliance with approved Quality Control plans, design documentation, SNiP and Russian Legislation;
    • Expert and methodology support within the competence during Quality Control activities by Contractors/Subcontractors to assure compliance with quality requirements to fabrication of modules;
    • Monitoring of completeness, up-to-dateness and quality of permissive documents of Contractors/Subcontractors.
    • Control of the following:
    • Receipt of materials for manufacturing of pipelines and piping;
    • Fabrication of pipelines and piping in compliance with project documentation, construction rules and regulations and other norms and standards;
    • Compliance with approved sequence of process operations;
    • Timely preparation of as-built documentation;
    • Participation in:
    • Incoming control of materials arriving at construction site;
    • Inspections and tests as per approved QC plans for fabrication
    • Final acceptance of completed work
    • Verification and acceptance of as-built documentation within the competence
    • Quality Control of the work performed by the Fabrication Contractor:
    • Provision of Quality Control reports, reports on discrepancies found in facility fabrication quality and make proposals on their elimination and prevention;
    • Issuance of instructions to Contractor and control over corrective actions if necessary;
    • Timely informing the line manager about found discrepancies within the competence;
    • Preparation of weekly and daily reports on the Contractor's performance; maintenance of statistics on inspections and quality, verification of actual quality reports;
    • Informing on the circumstances which prevent proper performance of job duties;
    • Participation in meetings of Quality Control Group and contractors on issues relevant to pipelines and piping







  • We are currently looking for a FLUIDS & CEMENT SUPERVISOR for one of our clients

    Following are Terms & Conditions for the role:

    Location of Assignment : OFFSHORE - Doha, Qatar

    Work Assignment : Contract Hire ( to work for the Client through MPH )

    Contract Duration : April 2021 - Jan 2025

    Work Schedule : Rotation

    CONTEXT AND ENVIRONMENT

    • The Job holder is the offshore supervisor of fluids, cement and waste management operations.
    • He manages the implementation of F&C program, ensures compliance to HSE and technical requirement by drilling contractor and third parties.
    • Supports drilling supervisor as required.
    • Reports to Fluids Superintendent and operational drilling personnel.

    QUALIFICATIONS & EXPERIENCE REQUIRED

    • The job holder should be educated to graduate level or similar level with engineering training and demonstrate high level of technical knowledge in the fluids and cement area.
    • Minimum of 5 years' experience in offshore drilling operations.
    • The job holder should have good working knowledge of internal and external rules, standards and procedures in the fluids and environmental areas, and be trained to level appropriate to statutory regulations.
    • Fluent spoken and written English compulsory.
    • The job holder should possess valid IWCF (surface), BOSIET / T-BOSIET and H2S (OPITO).

    ACTIVITIES

    • Contribute to the full implementation of COMPANY HSE goals and objectives
    • Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards
    • Ensure that Company and Contractor HSE standards are respected by the individuals executing the fluids, cement, waste management and other relevant contracts
    • Optimize the application of fluids, cement, and waste management services in the field. Coordinate actions between the different parties involved in order to ensure that the best procedures are followed
    • Ensure that Fluids & Cement programs and procedures are available, understood and adhered to by personnel involved
    • Assist the Drilling Supervisor to optimize performance
    • Direct application of drilling fluids engineering studies. Daily usage of drilling simulations software
    • Provide detailed analysis of F&C related operations, aiming to save and transmit the experience gained
    • Produce phase and final recaps for each service and compile all summaries and environmental discharges for each wellbore in a comprehensive end of well report.
    • Report/Record KPI's at each wells completion - highlight service company encountered problems.
    • Control logistics and inventory management
    • Follow up of all field operations
    • Follow up the daily consumption of the chemicals
    • Report on daily basis ongoing operations and plan to Fluids Superintendent
    • Report to Drilling Supervisor and Fluids Superintendent on any restrictions in fulfilling the objectives with respect to the drilling operations.
    • Perform quality assurance of mud and cement systems, stock inventory and consumption and Contractor reporting
    • Review laboratory analyses
    • Ensure permanent quality of data reporting (WELLVIEW and others)
    • Review and report analyses of any equipment failure or non-conformance services
    • Review and report solids control equipment efficiency
    • Ensure that job tickets and invoicing match with ongoing contracts and achieved jobs
    • Assist in the motivation and training of field personnel to meet COMPANY desired standards
    • All staff must be willing to participate in crisis response training and to assist during emergency response situations if required


  • [Riyadh, Saudi Arabia ]




    ELCAD Engineer

    About the Project:

    Our client is responsible for design and build of Riyadh metro networks. The scope of work encompasses detailed structural, architectural and transit system design together with construction, testing and Commissioning of work.

    Location: Riyadh (Saudi Arabia)

    Position: Direct Hire

    Availability: candidates to be available in Saudi Arabia

    The Role:

    Looking to hire an ELCAD Engineer to join Project Team in Riyadh.

    Responsibilities

    • Primary responsibility is to update the ELCAD shop drawings according to the red mark drawings and to realize the ELCAD as-built drawings of the entire Rail Electrification lot of Line 1 and 2.
    • Collect and organize the classification of the red marks.
    • Organize meeting with the site team to collect the red marks and clarify the red mark on site when necessary.
    • Submit the as-built package to the client.
    • Get client approval.
    • Must be able to work with Autocad.

    Reporting to: Engineering Manager.

    Requirement

    • Elcad & Autocad expert.
    • Diploma/Degree in Electrical Engineering.
    • Proven Track record in similar function ideally from a large Rail Project Environment
    • Mid-size Team Management experience ideally from a multicultural work environment in Middle
    • East region or other international assignments
    • Solid experience working in project environment (high level of flexibility, ability to work under pressure and to meet the deadlines)
    • Excellent level of English language. Arabic language is high appreciated but not a must


  • [Doha Qatar, Qatar ]




    Our client, world's largest Liquefied Natural Gas company, is urgently looking for a "Hook Up Specialist" willing to work under the following conditions for an upcoming project:

    Location of Assignment : ONSHORE - Doha, Qatar

    Work Assignment : Contract Hire ( to work for the Client through MPH )

    Contract Duration : December 2020 - 30 June 2022

    Work Schedule : 6 days a week / 10 hours a day

    Key Job Accountabilities:

    • Gives technical and constructability and completions input in works execution
    • Responsible for assuring contractual / technical requirements are met as per AGREEMENT with EPC CONTRACTOR
    • Ability to read and comment on construction documents, engineering specifications, design reports, data sheets and comment if necessary, to be in line with project specific requirements.
    • Ability to develop procedures for execution and ensures alignment with stakeholders
    • Participates in COMPANYPMS / IPR for BF Readiness (CER's etc), develop plan as per milestones
    • Working with the COMPANY / CONTRACTOR and interfacing with other teams to ensure project requirements are met and delivered on time.
    • Provide timely review of CONTRACTOR's documents/deliverables.
    • Supports the process of capturing and communicating lessons learned for the project and ensuring that lessons learned are considered in construction phase of the project.
    • Attend and contributes into the project main reviews including project risk sessions such as What-If, HAZID, HAZOP, Model Reviews, Constructability Reviews, SIMOPS and work as focal point to close out the actions.
    • Delivers visible HSE leadership

    Minimum Requirements

    Qualifications

    • Bachelor of Science in Engineering, Mechanical/Chemical/Civil Engineering is preferred. High Diploma with supporting experience may be considered.

    Knowledge and/or Experience

    • Five (5) years specific involvement in project offshore execution within an Oil and Gas environment including experience with both offshore and onshore facilities. Additional relevant work experience may be substituted for technical education.
    • Good knowledge of Project Execution procedures and techniques including welding, lifting and testing and completions
    • International experience, especially in Qatar or the Middle East, is preferred

    DEADLINE TO SUBMIT 19TH OCTOBER 2020



  • [Dubai, United Arab Emirates (UAE) ]




    Process Safety Engineers
    Contract Duration : 6 months initially, but is subject to extension depending on the project requirements.

    We are looking for people with experience in Process Safety, Loss Prevention & Fire Protection Engineering field in oil and gas FEED projects. He/she must have experience using relevant software.

    He/she must at least have 10 years of experience and must hold a Engineering Degree as a minimum.

    He/she must be in the UAE, available to join immediately or within in 15 Days, and must be one of the following:

    • Having UAE driving licence and private car that he/she can drive to/from work, if no private car then willing to relocate near office.






  • Terms and Conditions

    • Location: Doha, Qatar (offshore)
    • Status: Resident
    • Contract duration: 12 months
    • Work schedule: 10 hours per day & 6 days per week. 4 weeks on and 4 weeks off.
    • Medical Insurance: Provided
    • Mob/Demob ticket : Provided. Kindly note that this applies only if you are outside Qatar.
    • Accommodation, Transportation and Meal Allowance are provided.

    Main Duties:

    • Offshore supervisor position is part of marine solutions team and is responsible for all aspects of supervisor positioning and data acquisition.
    • Responsible for the quality control of positioning and logging of geospatial data for subsequent processing and reporting.
    • This role involves installing, calibrating and operating positioning and attitude sensors for the real-time determination of positions for vessels and other survey platforms, on and below the water.
    • Responsible for the processing and reporting activities for the project.
    • This will range from a final position report on a rig move to complex construction projects integrating data and information from a number of project vessels and construction phases.

    General Requirements:

    • This position requires individuals who are prepared and able to spend long periods of time offshore and away from home.
    • Offshore trips can vary from a few days in the case of a rig move or inshore survey to four to six weeks for long term geophysical or construction activities.
    • Ability to travel and work shifts aboard a vessel.
    • Within 24 hour call.
    • Good team player and able to get on with people of different backgrounds and cultures, be capable of working unsupervised and on their own initiative on occasions, be capable of making good judgment decisions, be reliable and have a positive attitude to work and have an attention to detail and quality of work performed.
    • Requires a strong commitment to personal safety and the safety of others. Regular completion of safety training courses and medical assessments is a mandatory requirement






    • Management of all aspects of process equipment in compliance with relevant Company requirements and applicable law.
    • Verification of availability at a Fabrication Contractor of a reliable plan and resources to accomplish works on prefabrication of components, on-site fabrication, testing, preservation, shipment and handover of modules.
    • Work with field design and fabrication teams to verify and approve all Contractor's work results. Enforcement of compliance with specifications, standards and schedules.
    • Identification and highlighting of all possible risks, opportunities or threats that may positively or negatively impact quality or project tasks. Assistance in development and implementation of action plans for unexpected circumstances to the extent necessary to maintain required work rate.
    • Development and update of weekly/monthly reports on operation performance to control Key Performance Indicators (KPI) and critical data analysis.
    • Assistance in review and timely authorization of technical deviation requests.
    • Supervision and reporting within the discipline framework.
    • Supervision of contractor's work within a relevant discipline.
    • Safe and efficient supervision over all aspects of on-site fabrication activities.
    • Introduction of lessons learned






    • Management of all aspects of process equipment in compliance with relevant Company requirements and applicable law.
    • Verification of availability at a Fabrication Contractor of a reliable plan and resources to accomplish works on prefabrication of components, on-site fabrication, testing, preservation, shipment and handover of modules.
    • Work with field design and fabrication teams to verify and approve all Contractor's work results. Enforcement of compliance with specifications, standards and schedules.
    • Identification and highlighting of all possible risks, opportunities or threats that may positively or negatively impact quality or project tasks. Assistance in development and implementation of action plans for unexpected circumstances to the extent necessary to maintain required work rate.
    • Development and update of weekly/monthly reports on operation performance to control Key Performance Indicators (KPI) and critical data analysis.
    • Assistance in review and timely authorization of technical deviation requests.
    • Supervision and reporting within the discipline framework.
    • Supervision of contractor's work within a relevant discipline.
    • Safe and efficient supervision over all aspects of on-site fabrication activities.
    • Introduction of lessons learned






  • Job Title: NSSS/BNI/Overall Test Analysis Engineer

    Report To: Technical Commissioning Manager

    Function:

    Within OL3 project, inside Commissioning Department and under Technical Commissioning Manager responsibility, the main duties of the NSSS / BNI /Overall Test Analysis Engineer are the following:

    • Support to the NSSS, BNI and Overall commissioning branches for the impact analysis from the new Technical changes on the commissioning documentation and activities
    • Release for Application of the Commissioning documentation
    • Issuance of the test reports
    • Validation of the test results
    • Validation of the requalification tests with the Commissioning Branches
    • Follow-up of the closure of the commissioning deviations and open points
    • Checking the highlighting of the I&C functional diagrams after validation of the I&C functions during the commissioning activities
    • Support to the commissioning branches for the License Holder Commissioning Inspections, Regulatory Commissioning Inspections and Take-Over of Systems to Temporary Operation before Fuel loading.

    Expected Deliverables:

    • Test reports
    • Review Sheet for the test reports
    • Validation of the RFA MoM
    • Technical Event Analysis Report

    Other Points:

    - Working organization:

    • Basic working organization is a 5 days per week.
    • Possible adaptation according to project activity (weekend work, shift work, on duty work….)

    - Language:

    • Fluent English required,
    • Ability with French, German or Finnish would be a plus.

    - Required on Site:

    • Milestone: FLG

    - Qualification:

    • The successful candidate should possess the following skills:
    • Graduated from General or Mechanical Engineering School or University
    • At least 2-year nuclear commissioning or system engineering experience. Oil & Gas & shipbuilding experience can also be considered.
    • PWR technology & EPR technology knowledge would be a plus.
    • MS office knowledge
    • Document writing capacity.
    • Versatile, Adaptable, Rigorous, Good interpersonal skills, Client & results oriented, attention to details.

    Kindly see terms and conditions below:

    Terms and conditions:

    Job Location : OL3 project, Finland

    Type of Assignment : Contract hire - Resident

    Duration : 31.01.2022

    Work Schedule : 5 days per week

    Shiftwork as required (weekend work, shift work, on duty work….)

    Driving License: In possession

    Accommodation : Studio or 1 bedroom and living fully furnished and equipped in either Pori or in Rauma (single accommodation)

    Local Transportation : Provided (One car for 2 persons)

    Medical Coverage : Provided

    Mob/Demob Tickets : Provided

    Annual Flight Ticket : Provided



  • [uae, United Arab Emirates (UAE) ]




    For different missions and different locations, we are looking for several candidates with knowledge of Radar (Ground Master 400, GM 200 if possible or other) in charge of :

    - Production and delivery of system and hardware problem reports (SPR and HPR), according to the model provided.

    - OJT training for the client's staff on radar system operations and maintenance,

    - Supervision system checks,

    - Responding to requests from customer personnel to troubleshoot the system,

    - Repair of the system using spare parts supplied by the customer,

    o Initial evaluation of defective parts to assess the repair/replacement decision,

    - Modification / update of the equipment limited to modifications due to technical problems and approved by Radar Design Authority (LAS France).



  • [saudi, Saudi Arabia ]




    We are looking for several candidates with knowledge of Radar Ground Master 400, GM 200 in charge of :

    - Production and delivery of system and hardware problem reports (SPR and HPR), according to the model provided.

    - OJT training for the client's staff on radar system operations and maintenance,

    - Supervision system checks,

    - Responding to requests from customer personnel to troubleshoot the system,

    - Repair of the system using spare parts supplied by the customer,

    o Initial evaluation of defective parts to assess the repair/replacement decision,

    - Modification / update of the equipment limited to modifications due to technical problems and approved by Radar Design Authority (LAS France).

    Requirements :

    - Good knowledge of the radar (maintenance and operation) (GM 400, GM 200 preferably)

    - Knowledge and experience of power generation and distribution equipment (maintenance and operation);

    - Knowledge and experience with radio communication equipment (maintenance and operation);

    - Basic knowledge of unix.

    - Awareness required to carry out maintenance work (electrical authorization, authorization to work vertically, at height, etc.),

    - Be able to obtain administrative authorization for entry to military sites.

    - English Language



  • [malaysia, Malaysia ]




    For different missions and different locations, we are looking for several candidates with knowledge of Radar (Ground Master 400, GM 200 if possible or other) in charge of :

    - Production and delivery of system and hardware problem reports (SPR and HPR), according to the model provided.

    - OJT training for the client's staff on radar system operations and maintenance,

    - Supervision system checks,

    - Responding to requests from customer personnel to troubleshoot the system,

    - Repair of the system using spare parts supplied by the customer,

    o Initial evaluation of defective parts to assess the repair/replacement decision,

    - Modification / update of the equipment limited to modifications due to technical problems and approved by Radar Design Authority (LAS France).



  • [indonesia, Indonesia ]




    We are looking for several candidates with knowledge of Radar Ground Master 400, GM 200 in charge of :

    - Production and delivery of system and hardware problem reports (SPR and HPR), according to the model provided.

    - OJT training for the client's staff on radar system operations and maintenance,

    - Supervision system checks,

    - Responding to requests from customer personnel to troubleshoot the system,

    - Repair of the system using spare parts supplied by the customer,

    o Initial evaluation of defective parts to assess the repair/replacement decision,

    - Modification / update of the equipment limited to modifications due to technical problems and approved by Radar Design Authority (LAS France).

    Requirements :

    - Good knowledge of the radar (maintenance and operation) (GM 400, GM 200 preferably)

    - Knowledge and experience of power generation and distribution equipment (maintenance and operation);

    - Knowledge and experience with radio communication equipment (maintenance and operation);

    - Basic knowledge of unix.

    - Awareness required to carry out maintenance work (electrical authorization, authorization to work vertically, at height, etc.),

    - Be able to obtain administrative authorization for entry to military sites.

    - English Language



  • [Jeddah, Saudi Arabia ]




    We are currently looking for a Radar Technician for our client specialised in Naval defense.

    The job will be based in Saudi Arabia.

    Experience:

    Radar experience in Marine/Naval sector

    French language is mandatory



  • [Murmansk, Russia ]




    Our Client an Oil and Gas is recruitng for the Position of Construction Deputy Director in Russia

    Job Location and Details:

    Location: Russia

    Contract Duration: 12 weeks ON / 8 weeks OFF

    Salary: Negotiable (Depending on the Candidate Experience)

    Responsibilities:

    • In close collaboration with Construction Director, set up Site team (permanent and on mission basis engineers) and coordinate of the day to day activities related to the Module Fabrication and Modules integration at Site.
    • Be a force of proposition to the Project Management in developing, recruiting and implementing full project organization to ensure smooth project development and technical coordination for every step of the execution phase
    • Be accountable for the performance of the construction and modules integration
    • Ensure adequate contractual communication with all Contractors at Site.
    • Control Construction project progress (technical, schedule and costs)
    • Manage and actively support the team, creating team spirit and motivation
    • Ensure respect of internal and external rules
    • Promote innovation and cost reductions when seeking technical solutions, prioritising reliability and safety of installations and personnel and respect of the environment
    • Follow-up and coordinate the execution activities by Contractors during Construction at Site, ensuring that safety, environment, cost, planning and quality are respected
    • Ensure effective use of the Project Electronic Documentation Management System (EDMS) interfaced with Contractor's system.
    • Review and control regularly the quality and consistency of the detailed design deliverables by Contractor
    • Liaise with all departments (Procurement, Contract, HSSE, QA/QC, Commissioning and Operations representatives) as appropriate, to ensure design is safe, operable, flexible and maintainable within the contractual requirements
    • Ensure adequate preparation related to the transfer of installations to production teams
    • Ensure suitable transfer of facilities to operations (including commissioning, assistance to start-up)
    • Identify and anticipate any critical problems/issues and propose corrective actions/solution as necessary

    HSSE Responsibilities:

    • Responsible to ensure and warrant that activities are carried out safely, without any LTI, and with contribution towards continual improvement.
    • Responsible for promoting Contractors and Subcontractors management to participate to HSSE Site tour
    • Ensure all team members will attend to mandatory HSSE trainings, refresher / expired trainings
    • Adhere to HSSE and other policies, Confidentiality, Compliance needs and Procedures.
    • Attend mandatory HSSE trainings, refresher / expired trainings and apply them on Procedure/Project activities

    Key Performance Indicators

    • HSSE: To be within or better than HSSE LNG 2 targets
    • To work with as one team spirit with other entities than construction, like HSSE, Commissioning, Operations,
    • Construction progress of the assigned Work Package within or better than targets.
    • Project Milestones and deadlines reached.
    • Project cost kept under control - to inform immediately Construction Director if any risk of deviations and propose solutions.

    Minimum Requirements:

    Technical:

    • Engineering, Project, Construction and Commissioning technical expertise.
    • Confirmed skills in Oil and Gas Industry (minimum of 15 years' experience on LNG project will be recommended)
    • Management of multidisciplinary and multicultural team of engineers and technicians.

    Behavioral:

    • Project Management positions at best industry standards in harsh environment and with multi-cultural workforce and complex organization.
    • Influencing capacities in key-areas as a Secondee.
    • Capable of liaising efficiently with spread-out and remote organization, and of establishing an efficient support network.
    • As a Senior Manager, to be a role model, in order to have teams giving their best at work.

    Qualifications:

    • Master's in chemical or Mechanical Engineering or equivalent with expertise in Construction and Projects Management.

    Experience:

    • Generalist or former specialized graduated Engineer with more than 15 years of experience in the oil & gas industry including petroleum engineering and surface facilities installations management.
    • Strong Experience in Project Management, Construction areas.
    • Solid experience in LNG area is a must.






  • Our Client is looking for a Field Engineering Leader for the module's fabrication phase of ARCTIC LNG 2 for the below terms and conditions

    Location: Fabrication Yard, China

    Status: Rotation 8 weeks on / 2 weeks off

    Working Status: 6 Days per week

    Duration: 2 years with possible extension

    Accommodation Provided

    Mob/Demob Ticket: Provided

    Rotational Flight Ticket: Provided

    International Medical Insurance: Provided

    With Minimum Requirement

    • At least 5 years of experience in major international oil and gas projects at the Client's/General Contractor's side.
    • First-hand experience in steel structures mounting, piping, E&I, coatings, insulation, scaffolds, welding, testing, machinery support engineering etc.
    • Profound understanding of static and rotating equipment used in oil and gas projects.
    • Overseas work experience at LNG Plant Projects or similar.
    • Fluency in English
    • High Level of Professional Qualification
    • At least 10 years of engineering/managerial experience.
    • Proven experience in modules fabrication.
    • High leadership skills, self-disciplined, proactive, result oriented.

    If you are Interested, Kindly apply