We are looking for a Batch 3 CPP Preservation PVV for one of our clients with the following details:

Start date: 01-Jan-2024

End Date: 31-Jul-2024

Location: Korea and Qatar

Work Status : Resident Onshore, Single

Qualification and Experience Required:

• Qualification: Bachelor's degree or equivalent in engineering,
• Professional Experience in the offshore oil & gas project (number of years): 10
• Experience within project: (number of years): 5.
• Familiar with Total Energies General Specifications, EDMS (PRODOM/MANASA).
• Construction, Pre-comm, Quality Inspection experience is required for Top side projects.
• Good knowledge on Various Preservation practices, Risk & Hazards associated and mitigation measures.
• A good knowledge of Oil and Gas Industry Standards and International codes/standards related to Piping and associated component's
• Good leadership skills and good communication skills.
• Good reporting skills,
• Ability to work on projects in a complex and multicultural environment.
• Be skilled in using computer programs for word processing, database management, spreadsheets and e-mail communications.
• Language: English mandatory.

Activities

• To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities,
• To carry out work in compliance with NOC values and policies, relevant laws and regulations, agreed NOC priorities and objectives, NOC standards and procedures and good industry practices,
• To treat all information obtained during course of the work with confidentiality,
• To closely monitor PVV equipment's storage (short / long term) and necessary preservations/ de-preservations during Construction & Pre-comm phase.
• To ensure relevant Preservation registers, logs, reports, Identification labeling are executed by CTR/ Sub-CTR
• To organize regular meetings, follow up , site inspections are conducted with respective counterparts from CTR/ Sub-CTR
• To ensure The Preservation related activities are prepared and tracked using ICAPS© Preservation record sheet.
• To ensure Preservation history and records are made available at any time until the equipment is formally transferred
• To ensure Lessons Learned on Preservations issues from Past Projects are taken into consideration for CPP Topside Project.
• To coordinate any HSE concern or issue with HSE team, and to immediately report to CPP Topside Preservation Lead and HSE team in case of any accident/incident happened
• To promote alternative solutions to reduce and to optimise the activities.
• To reports on a day-to-day basis directly to the CPP Preservation Lead.
• To carry out any other duty or task that may be assigned by hierarchical superiors.

If Interested Kindly apply.

We are looking for an HSE Lead with the following details :

Location: Doha/ India/Vietnam/Malaysia/Oman/China/Korea/ Singapore ( to be confirm )

Work Status : Resident, Single

Start Date: 1-NOV-2023

End Date: 31-OCT-2025

Mandatory Requirements :

• The candidate shall have strong/solid experience in HSE Management
• The candidate shall have extensive experience of construction yards (preferably Asian yards).
• Shall have work as Client on Contractor yard in term of HSE Management OR shall have experience as Contractor HSE Manager (minimum) on Contractor Yard working directly with Oil and Gas client (Major O&G CPY).
• The candidate shall mastering management systems to ensure proper delivery of procedure and plans requested for such type of project (ERP, Relocation plan, review of Contractor Project Procedure…)
• The candidate shall understand that he will be the focal point with Package Manager in term of HSE and the link between the superintendents and the construction teams. Similar configuration in past experience shall be part of the candidate skills

ACTIVITIES

Safety Culture:

• Culture Promotion: Vigorously advocate for the Incident Free safety culture program across the project.
• Culture Reinforcement: Engage in HSE communications and workshops, bolstering the safety culture program's implementation.
• Training & Induction: Plan and conduct safety trainings, presentations, and inductions.

Preparation:

• Launch & Relocation: Initiate the EPC execution phase with the Contractor and manage the safe relocation of various EPC Company teams post-contract award.
• Communication: Facilitate effective communication between the Company and Contractor.
• Personnel Selection & Management: Aid in choosing and managing HSE personnel to oversee all HSE aspects of the contractor construction yard's activities.
• Competency Matrix Development: Design the Onshore training/competency matrix.
• Procedure Support: Assist the Contractor in preparing project specific HSE procedures.
• Documentation Coordination: Collaborate with the Contractor to develop the Onshore Master Document Register and implement an Actions Tracking Register for CTR and CPY onshore preparation.
• Document Review: Ensure prompt review of HSE-related documentation submitted by the Contractor in the document control system.
• Emergency Response Plans: Confirm that appropriate Emergency Response Plans are in place for all areas under the Company's responsibility.
• Audits & Inspections: Perform audits and inspections of all premises intended for Company personnel use to ensure they meet the expected hygiene and safety standards.
• Engineering Phase Support: Provide valuable support to the engineering phase at the early stage of site mobilization.

Execution:

• Supervision: Oversee construction, installation, and integration activities, ensuring compliance with COMPANY values, policies, laws, regulations, priorities, objectives, standards, and industry best practices.
• Inspections: Conduct regular Health & Safety inspections in alignment with CPY HSE policy and expectations.
• Audits: Carry out HSE audits as per Contract requirements.
• Worksite Safety: Verify all work is performed without risk to surrounding areas.
• Incident Investigations & Reporting: Lead and report on training, incident investigations, and Cause Tree Analysis.
• Incentive Scheme Management: Implement, communicate, and oversee the correct implementation of the Incentive Scheme as per the contract.
• Training: Direct mandatory HSE training for Company and Contractor staff.
• Co-activity Control: Establish robust co-activity control at worksites.
• Risk Management: Participate in risk assessment workshops, assist in early risk identification, and ensure risk identification due to operational changes and implementation of change management procedures.
• Meetings: Attend Toolbox meetings and participate in regular worksite coordination meetings to report on HSE activities.
• Environmental Conditions: Oversee the implementation and maintenance of environmental conditions.
• Emergency Drills: Participate in and observe Contractor-organized emergency drills.
• Contractor Relations: Maintain positive relationships with Contractors, demonstrating flexibility but also firmness when necessary to achieve the Project's HSE objectives.
• Reporting: Document all HSE activities, including KPIs and incident registrations, and report to the hierarchy.
• Work at Heights & Lifting Management: Ensure safe execution of all activities related to working at heights and strict adherence to rules and Company standards related to scaffolding and lifting management.
• Wellness Promotion: Encourage wellness programs to promote overall worker health.
• Legislation Awareness: Stay updated with any changes in HSE legislation and ensure project compliance.
• Subcontractor Coordination: Work with subcontractors on HSE-related matters and ensure their compliance with HSE guidelines.
• Contractor HSE Systems Assessment: Review and evaluate contractors' HSE management systems and their adherence to the project's HSE plan.
• Hazard Procedures: Implement procedures for hazard identification in all project activities (including the engineering phase) and ensure all potential hazards are properly addressed.

Contexte de la mission :
Basée dans les Yvelines, la société ITP SA conçoit, fabrique et installe des équipements à haute performance thermique pour le transport d'hydrocarbures.
Pour un projet de conduite de transport d'ammoniaque aux Etats-Unis, ITP SA répond à un projet pour être responsable du design, de l'approvisionnement et de la fabrication d'un système de 2,5km de pipe-in-pipe qui sera installé en Louisiane.
La phase d'ingénierie du projet va démarrer fin 2023. Elle va nécessiter une phase de préparations d'équipements, d'implantation de ces équipements, d'organisation des flux et des postes de travail sur le site ITP SA de Ranville (Calvados, 14) où se déroulera la production de ces pipe-in-pipe et où sera basée une partie de l'équipe projet.
Le reste de l'équipe projet sera basée dans les locaux d'ITP SA à Louveciennes (78). Une partie de l'équipe ingénierie sera basée à Houston.
Dans le cadre de ce projet, ITP SA recherche un(e)Ingénieur Méthode possédant 5 à 10 ans d'expérience minimum et qui aura comme responsabilité la préparation d'une partie des équipements de fabrication et des postes de travail en prenant en compte l'ensemble des aspects techniques, Santé/Sécurité/Environnement et Qualité.

Objet de la mission :

Dans le cadre de la préparation des postes de travail et des flux, l'Ingénieur Méthodes est en charge des activités suivantes :

* S'approprier le REX des précédents projets.
* Concevoir/sélectionner des équipements pour le périmètre dont il a la charge
* Rédiger des spécifications techniques.
* Consulter des entreprises extérieures.
* Prendre en compte des contraintes de maintenance et de robustesse des équipements à acheter / remettre en état
* Participer à la réception des équipements sur le yard de Ranville.
* Être le référent technique pour la bonne installation et le démarrage des installations
* Rédiger les instructions de travail, modes opératoires, etc. nécessaires à la production
* Participer de manière proactive aux analyses de risques et analyses des modes de défaillance.
* Elaborer les plans de levage dans le cas de levages spéciaux.
* Rédiger des rapports réguliers à l'équipe projet.
* Suivre et mettre à jour le planning projet
* Être un support à la résolution des problèmes potentiels HSE et qualité.
* Formaliser le REX projet en fin de mission.

Interface avec les services supports

* Ingénierie
* Production
* Management de Projet
* QHSE

Référent : Le/la Ingénieur Méthodes reportent opérationnellement au projet et fonctionnellement au Responsable Méthodes des opérations ITP, basé sur le site de Ranville.

Lieux d'intervention :
Cette mission est basée sur le site de fabrication d'ITP SA à Ranville dans le 14.
Des déplacements ponctuels chez des fournisseurs sont à prévoir

Durée de mission :
Mobilisation octobre pour une mission jusque 3ème trimestre 2024

We are looking for a Secretary for one of our clients with the following details:

Start date: 01-Jan-2024

End Date: 31-Jul-2024

Location: Korea and Qatar

Work Status : Resident Onshore, Single

Qualification and Experience Required:

• 2+ years of experience as Technical or Administrative Assistant
• Bachelor's degree
• Substantial Experience in office administrative role
• Competence in use of MS Office applications like Excel, Word and Power Point,
• knowledge of Document Controlling preferred
• Good Communication skills and fluency in English

Activities

• Promote & comply with applicable safety instruction and other Company HSE procedures in all activities
• Carry out work in compliance with Company values and policies, relevant laws and regulations, agreed Company priorities and objectives, Company standards and procedures and good industry practices
• Treat all information obtained during course of the work with confidentiality
• Provide support with the scheduling and coordination of meetings, appointments, and meeting room bookings as required
• Act as first point of contact for visitors, control the movement of incoming and outgoing visitors ensuring that they are always escorted
• Arrange transportation, shuttles, drivers for meetings outside office premises
• Organize business lunches, special deliveries, etc.
• Maintain the Package leave schedule for Korea

In liaison with the CONTRACTOR representative for all items part of the Services to COMPANY:

• Carry out customary administration and paperwork processes (photocopy/scan dispatch and filing of documentation)
• Prepare business cards, stamps, and other related work order requests for the project
• Assist the team in liaising with CONTRACTOR for day-to-day queries, raise issues and follow-up on their behalf (AC, offices, stationery, IT, etc.)
• Ensure that the project office always has an adequate stock of stationery items, pantry consumables and the like
• Ensure all Services to COMPANY are provided according to the CONTRACT
• Ensure efficient communication with all other NOC Technical Assistant
• To define and maintain a proper electronic filing structure

Other responsibilities:

• Maintain the Letter Register along with the Contract Engineer
• To ensure along with Technical Assistant arrangements for mission orders
• To carry out any other duties or tasks that may be assigned by hierarchical superiors
• Dispatching Letters and Minutes of Project meetings to all attendees
• Sending TQR's and DEV's to Engineers through Manasa
• Maintain Register for TQRs, DEVs, MOM's of Gallaf Batch 3 CPP EPC6) Korea

If Interested Kindly apply.

We are looking for a Batch 3 CPP HSE Supervisor for one of our clients with the following details:

Start date: 01-Jan-2024

End Date: 31-Jul-2024

Location: Korea and Qatar

Work Status: Resident Onshore, Single

Qualification and Experience Required:

• Large experience on similar activities at equivalent position.
• Familiar with Rigging & lifting activities.
• Familiar with Working at height activities and prevention/control measures.
• Experience offshore on similar activities.
• Basic qualification related to scaffolding activities.
• English fluent.
• Professional Experience within the same field (number of years): 10.
• Experience within Oil and Gas project: (number of years): 5.
• Good leadership skills and good communication skills.

Activities

• HSE Supervision of the fabrication activities: ensure that the work is carried out in compliance with company values and policies, relevant international laws, and regulations, agreed NOC priorities and objectives, Company standards and procedures and good industry practices.
• Regular inspection of Health conditions and mitigation measures related to COVID19 and other contagious disease.
• Perform, on a regular basis, Health & Safety inspections in compliance with CPY HSE policy and expectations.
• Perform and establish good communication between Company and Contractors/Subcontractors. Ensure warning signs, poster and regular safety Campaign are in place and efficient;
• Motivate Contractor, Subcontractor and Company personnel in order to achieve HSE targets;
• Being "visible in the field" and "walking the talk" with HSE as a priority;
• Ensure deployment of the HSE tools and templates developed in Major Projects;
• Ensure/confirm follow up and closure of the Site inspection findings identified.
• Ensure that all works are performed without any risk for surrounding areas. Ensure contractor is conducting proper Risk assessment for the job. Participate into it.
• Able to prepare and perform presentations & Inductions. Support Contractor in organizing events as per contract (HSE Committee, Walkthrough, Management Site Visit, etc.)
• Run for the benefit of the Subcontractor Personnel the Incident Free training.
• HSE administration skills, Training / participating in Incident investigation.
• Promotion of the Project HSE Policies including safety observations.
• Ensure an Action Tracking Register is open by Subcontractor and properly populated with findings from audits, lessons learned, events corrective actions or safety observations, and closed appropriately.
• Promote and participate to HSE communications and workshops as part of safety culture program implementation.
• Ensure that all site personnel wear appropriate PPE.
• Control and participate in Workforce Toolbox Talk meetings.
• Checking and monitoring of environmental conditions, waste and chemicals management are correctly implemented and maintained at a satisfactory level during the whole fabrication phase.
• Participate and observe Emergency drills organized by Subcontractor.
• Participate in regular yard coordination meetings to report HSE activities for all disciplines.
• Participate and report on hygiene and safety tours.
• Maintain good relationships with Subcontractor, being flexible enough but also strict when necessary to achieve the HSE objectives of the Project.
• Ensure that all activities related to working at heights are performed in a controlled and safe manner.
• Ensure that a safe working environment is provided to workers by Subcontractor where all equipment is inspected, controlled and/or tagged and fit for the activities.
• Ensure that pressure tests are properly performed, covered by appropriate PTW and JHA, safe perimeter properly defined and operators aware of the risks.
• Familiar with the Permit to Work process and controls (audits) to ensure that activities are permanently under control and managed accordingly.

If Interested Kindly apply.

We are looking for QA/QC Lead Subsea Structures (O-1516-Q) one of our clients with the following details:

Start date: ASAP.

End date: 31-MAY-2026

Contract Duration: 36 months

Location: Qatar - Onshore

Qualification and Experience Required:

• Preferred BSc in Engineering or equivalent significant experience, preferred Diploma in Quality Assurance from a recognized Quality Institute or equivalent and/or IRCA ISO 9001 Lead Auditor Accreditation & Valid ISO 9001 Lead Auditor Certificate.
• Preferred CSWIP Senior Welding Inspector with ISO 9712 NDE Qualifications.
• Demonstrated over 8 years of experience in the Role of Quality Supervision of offshore Oil and Gas Topsides facilities.
• Shall have a proven track record or deliverance in challenging project environments in a Senior Quality role.
• Demonstratable, successful quality completions of International Offshore Pipelines Projects from FEED to Pre-Commissioning, Commissioning, and Handover activities.
• More than 5 years' experience in the development and delivery of External & Internal Audit Programs along with Quality Surveillance Programs.
• Sound written and verbal communication skills with the ability to communicate at all organizational levels.
• Sound technical, management, supervisory and interpersonal skills.
• A high level of proficiency in written and spoken English.
• Computer literacy involving the regular use of professional office applications and some technical applications.

Job Description:

• The position is located at Qatar and is responsible to ensure effective implementation of the Qatargas Project Management Systems (QGPMS) through managing the implementation of the Project Quality Plan, Quality Processes to achieve the Project Quality Objectives.
• The role is to assure through Quality monitoring and measurement the implementation of QGPMS & EPCI Contract Quality Requirements, Leading Quality Audit Programs, Quality Surveillance and Quality Self-Assessments.
• Preferred BSc in Engineering or equivalent significant experience, preferred Diploma in Quality Assurance from a recognized Quality Institute or equivalent and/or IRCA ISO 9001 Lead Auditor Accreditation & Valid ISO 9001 Lead Auditor Certificate.
• Preferred CSWIP Senior Welding Inspector with ISO 9712 NDE Qualifications.
• Demonstrated over 8 years of experience in the Role of Quality Supervision of offshore Oil and Gas Topsides facilities.

If interested kindly apply.

MPH is recruiting a TOPSIDES Structural Supervisor
Contract Duration Till: 31-Jul-2024
Location: Doha/Korea

CONTEXT AND ENVIRONMENT
*Major Projects involve the development of new offshore platforms bridge linked to the existing facilities or remotely connected with subsea lines. Projects are executed across several international sites and will require complex interfaces with other entities of COMPANY.

*CPP Topsides Structural Supervisor will be based in EPC Contractor's premises in South East Asia during the whole EPC execution and could be relocated in Doha during Offshore Hook-up campaigns.

ACCOUNTABILITIES
The job holder is accountable for the following activities during Gallaf Batch 3 EPCI6 Topsides project execution:
* To follow, to monitor and to supervise Structural activities (prefabrication and erection) carried out by CPP Contractor/Subcontractor at the main Topside Construction worksite and at SUBCTR's facilities during the execution phases, to ensure that his discipline's contractual and technical requirements are duly applied by Contractor and/or Subcontractors.

* To ascertain that the CPP Topsides facilities are built as per the project requirements; the job holder verify that Contractor and Subcontractors are using latest AFC drawings, fabrication procedures and methodologies.

* He reports on a day-to-day basis directly to the Topside Structural Superintendent

* He works alongside other Structural supervisors, and, as such, provides accurate progress and/or technical issues on daily basis.

* The job holder is also accountable for demonstrating, individually, an exemplary behaviour about HSSE rules & requirements and ensures compliance with quality standards.

* Searches for the most efficient technical solutions.

ACTIVITIES
-To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities.

-To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices.

-To treat all information obtained during course of the work with confidentiality.

-During construction and pre-commissioning phases, the job holder shall:
o Review the relevant Contractor's ITP's and procedures (in coordination with Structural activities),
o Monitor and control the implementation on site of the approved drawings and plans, Surveillance plans, Inspection and test plans,
o Monitor and control CTR's daily / weekly progress report for structural prefabrication, assembly and erection,
o Liaise with CPY QC team to ensure that the works are closely inspected by the contractor's QC inspection team (e.g. RT, UT, MPI, PMI, etc.);
o Follow up on the implementation of decided action plans, or other mitigation plan issued,
o Stop & report immediately to Topside Structural Superintendent any anomaly or non-conformity,
o Attend and participate when requested, to the various construction meetings, and provide support to the STR SPDT in its various reviews
o Participate to construction, HSE or QAQC specific audits or visits; Provide regular inspection & activity reports.
o Ensure that Contractor and SubCTR's personnel are qualified for the task they've been assigned to.
o Responsible for monitoring contractor's labor resources in accordance with approved mobilization plan and report to Structural Superintendent.
o Assist reporting during all phases and more particularly the close-out report and lesson learn.
- Ensure the correct implementation of the Permit to Work system
- If required by management, the Structural Supervisor will have to work during week-end and/or night shift during critical activities.

QUALIFICATIONS & EXPERIENCE REQUIRED
* Have an Associate's or BS degree in a technical field or extensive natural gas/oil industry experience.
* Have strong working knowledge of Korean construction yard.
* Professional Experience (number of years): 15.
* Experience within project: (number of years): 10.
* A good knowledge of TOTAL General Specifications (GS) and International codes/standards (AWS, API).
* Conversant with General Arrangement (GA) engineering and structural drawings including building marking plans.
* Ability to work in a team oriented, collaborative environment is essential.
* Capable of proposing project adjustments and alterations promptly and efficiently.
* Ability to influence and encourage personnel.
* Good leadership skills and good communication skills.
* Ability to work on projects in a complex and multicultural environment.
* Be skilled in using computer programs for word processing, spreadsheets and e-mail communications.
* Familiar with MANASA/PRODOM.
* Medical Check-up report up to date.

Use of DOORS on metro or LRT projects

Our client, an Operator company, is urgently looking for a "Radiation Protection Officer" willing to work under the following conditions for an upcoming project:

Terms and Conditions

Work hours per day: 10 hrs./day

Workdays per Week: 6 days/week

Workday per Month: 26 days/month

Contract Duration: 36 Months

Current Location: Qatar, Onshore.

Job Responsibilities Highlights:

• Provide oversight on the EPC Contractor and specialist subcontractor who will develop, document, and implement Radiation Protection Programs consistent with project and regulatory requirements.
• Liaise with the Client Company Radiation Protection Officer (RPO), as the focal point for MoECC on all matters related to radiation, including licenses and their renewals for nucleonic devices containing sealed radioactive source and radiation generating equipment.
• Review contractor/ subcontractor written procedures for radiation work (e.g., contractor method statement, radiation safety / protection procedures, safety manual, job safety analyses) and ensure contractor procedures, and control measures are suitable and sufficient for radiation work.
• Ensure that the EPC Contractor confirms and maintains up to date, that radiation workers' and RPOs license from MoECC are valid and up to date. Help ensure that the EPC Contractor has a program in place that provides information to those involved in radiation activities on the potential health risks, and effective use of personal protective equipment (PPE), procedures required to minimize exposures to radioactive materials. Ensures that the EPC Contractors/Subcontractor identify and classify the controlled and supervised areas for radiography and intermediate storage. Ensure adequate physical barricading with appropriate warning signs is established. Ensure that contractors maintain properly calibrated and operable radiation survey meters that can detect low radiation levels and contamination levels. Ensure that TLD badges and Radiation equipment calibration should be done from the MoECC approved party only.
• Collects data on a quarterly basis, by physical inventory to account for all sealed radiation sources under the control of EPC Contractors.
• Provides input and oversight on the location, design, and specification for storage of radio-active isotopes to help ensure it meets the applicable regulatory requirements.
• Confirms that the EPC Contractor/ subcontractors have written operating emergency procedures on radiation protection / safety that are approved by the MoECC. Provides oversight on classified persons including requirements for calibrated personal dosimeters and Thermo Luminescent Dosimeter (TLD) badges with submission to an accredited laboratory of MoECC in line with risk assessment requirements.

Perform routine site inspections at contractors' work sites of EPC1,2,3&4 and audits to ensure compliance to applicable regulations.

Knowledge and/or Experience:

• Bachelor's degree in engineering, Physical Science (Chemistry / Physics / Health Physics), Environmental Science, Radiological science, or an advanced degree

Approved Ministry of Environment and Climate Change (MoECC), RPO license or Eligible for RPO licensing with the MoECC .

We are looking for Flexible Engineering Services one of our clients with the following details:

Start date: ASAP.

Duration: 12 months (renewable)

Location: FRANCE / Paris area

Service Status: Resident (attached WSC France if applicable)

Worldwide missions to be forecasted due to spread of work-packages and Contractors' locations, frequent missions in Angola.

Qualification and Experience Required:

Qualification: Engineer or equivalent

Languages: English mandatory - Portuguese would be a plus

Professional Experience: 15 /20 years in Oil & Gas industry on Offshore Projects / Fields

Experience within project: + 10 years with sound engineering experience in flexible engineering / fabrication

Missions / Service Dimensions

The service holder shall ensure the following missions:

• To supervise and control the detailed engineering by timely reviewing the disciplines-related documentation issued by Contractor (WPS / WPQR / technical documentation / queries / derogation requests), to ensure compliance with Project Specifications and Procedures (when applicable), international norms and standards with the objective to ensure respect of the schedule and to optimise costs without impacting required level of Quality and Safety.
• To raise consequently necessary comments and highlight unsafe design, deviations, unacceptable / unjustified design choices, constructability issues.
• To supervise and control the detailed engineering by timely reviewing the disciplines-related documentation issued by Contractor (WPS / WPQR / technical documentation / queries / derogation requests), in order to ensure compliance with Project Specifications and Procedures (when applicable), international norms and standards with the objective to ensure respect of the schedule and to optimise costs without impacting required level of Quality and safety to raise consequently necessary comments and highlight unsafe design, deviations, unacceptable / unjustified design choices, constructability issues
• To promote safety culture within the project and his/her activities. Lead by exemplarity to have the team members and colleagues adhering and contributing.
• To ensure that safe and ethic working practices are carried out within the activities that he/she is managing or interfacing with. To guarantee the compliance on his activities.
• To ensure that state of the art, TEPA referential and local rules/laws are complied with and captured in all contractual requirements.
• To work by anticipation.
• With the spirit of One TOTAL values, to establish and manage his/her activities motivating his/her counterparts and to work diligently to meet the targets of the Projects.
• To promote innovation as far as compatible with good enough approach for all activities. To seek optimization and savings all along the different phases of the project. To focus on costs without impairing QHSE objectives.
• To keep divisional Manager and all parties (as required) informed regarding ongoing activities status. To advise the Project Managers on architecture related actions/decisions.
• To issue and maintain all the necessary technical documentation related to the disciplines.
• To identify, implement and manage all necessary engineering studies related to flexible.
• To review, during bid stage review and clarified bidder proposal.
• To define the qualification and test programmes (test protocols, implementation of results), and to analyse results, deciding on any changes or complement in the program.
• To participate to project reviews as requested by Company requirements (HAZOP, HAZID, PR) and prepare or participate in Safety / Technical Audits for his/her disciplines.
• To liaise and interface actively with other SURF specialists with regard to the disciplines-related matters and on all engineering, procurement, constructability, operability and maintainability matters, in order to ensure consistency of the work.
• To follow the supply and procurement done by the contractor; to participate of the definition of the QA/QC programme in coordination with the Flexible Leader and QA/QC Leader; to participate to inspection as necessary at the various locations.
• To assist Company Representatives at fabrication sites and participate to the resolution of any related-discipline problem occurring during the Execution Phase, to advice on technical deviation requests and to keep updated the documentation related to his discipline
• To participate to the resolution of any discipline-related problem occurring during the Execution Phase, to review and give recommendation on technical deviation requests and to keep updated the documentation related to the disciplines.
• To ensure adequate and timely reporting to the SURF Packages Leader (progress, concerns), and, as a general manner, anticipates problems, optimizes, improves, offers solutions with regards to his discipline.
• To liaise as necessary with the SURF Interface Engineer for the management of interfaces related to the disciplines.
• To promote safety culture within the project and his/her activities. Lead by exemplarity to have the team members and colleagues adhering and contributing.
• To ensure that safe and ethic working practices are carried out within the activities that he/she is managing or interfacing with. To guarantee the compliance on his activities.
• To ensure that state of the art, TEPA referential and local rules/laws are complied with and captured in all contractual requirements.
• To work by anticipation.
• With the spirit of One TOTAL values, to establish and manage his/her activities motivating his/her counterparts and to work diligently to meet the targets of the Projects.
• To promote innovation as far as compatible with good enough approach for all activities. To seek optimization and savings all along the different phases of the project. To focus on costs without impairing QHSE objectives.
• To keep divisional Manager and all parties (as required) informed regarding ongoing activities status. To advise the Project Managers on architecture related actions/decisions.
• To issue and maintain all the necessary technical documentation related to the disciplines.
• To identify, implement and manage all necessary engineering studies related to flexible.
• To review, during bid stage review and clarified bidder proposal.
• To define the qualification and test programmes (test protocols, implementation of results), and to analyse results, deciding on any changes or complement in the program.
• To participate to project reviews as requested by Company requirements (HAZOP, HAZID, PR) and prepare or participate in Safety / Technical Audits for his/her disciplines.
• To liaise and interface actively with other SURF specialists with regard to the disciplines-related matters and on all engineering, procurement, constructability, operability and maintainability matters, in order to ensure consistency of the work.
• To follow the supply and procurement done by the contractor; to participate of the definition of the QA/QC programme in coordination with the Flexible Leader and QA/QC Leader; to participate to inspection as necessary at the various locations.
• To assist Company Representatives at fabrication sites and participate to the resolution of any related-discipline problem occurring during the Execution Phase, to advice on technical deviation requests and to keep updated the documentation related to his discipline
• To participate to the resolution of any discipline-related problem occurring during the Execution Phase, to review and give recommendation on technical deviation requests and to keep updated the documentation related to the disciplines.
• To ensure adequate and timely reporting to the SURF Packages Leader (progress, concerns), and, as a general manner, anticipates problems, optimizes, improves, offers solutions with regards to his discipline.
• To participate in the installation, tests, commissioning, and handover, assisting the Installation Team during all the Offshore phases of the works.
• To liaise as necessary with the Interface Leader for the management of interfaces related to the disciplines.
• To ensure confidentiality of all the disciplines-related documentation produced (whatever its support).
• To gather, as requested, 'lessons learnt' and provide feedback to the Engineering and Procurement Leader and other TOTAL E&P entities as required.

If interested kindly apply.

Looking for a Senior Rotating Engineer to work in Doha/ India/ Vietnam/ Malaysia/China/ Korea/ Singapore/Oman

Start date: 01-NOV-2023

End date: 31-OCT-2025

Qualifications and experience required:

• Qualification: Engineering degree in Mechanical Engineering.
• Experience: Minimum 12 years' experience as Rotating Engineering in Oil and Gas industry.
• Experience as rotating engineer in project involving gas turbines and compressors
• Strong leadership skills and good communication skills.
• Good analytical skills.
• Familiar with the client company general specifications is a plus, and with relevant codes and standards,
• Language: fluent English,
• Ability to work on projects in a complex and multicultural environment.

If interested, kindly apply!

MPH is recruiting a CPP TOPSIDE QC Coating Supervisor
Location: Doha Onshore-Offshore/Korea
Contract Duration Till : 31-DEC-2024

ACTIVITIES
*Participate in all quality control and inspection activities linked to painting, coating, thermal insulation and passive fire protection during construction at Contractor yard.
*Review and approved the material certificates.
*Witness the different PQT and validation of painting operators.
*Participate in the Non-Conformance reports issuance.
*Review and approved the different inspection reports issued by the Contractor on a daily basis.
*Witness inspection activities based on the Quality Control Plan (ITP).
*Ensure that CTR's personnel are qualified for the task they've been assigned to.

ACCOUNTABILITIES
The job holder is accountable for the following activities during Gallaf Batch 3 EPCI6 Project execution:
* To implement the Major Project Quality Management System at Project level.
* To ensure the performance of the Contractor and Subcontractors is achieving the Project Quality requirements.
* To implement the Technical Referential and applicable local and international codes.
* To supervise and inspect all painting and coating quality control activities following Quality Control Plan.
* To ensure that painting, coating, thermal insulation and passive fire protection, quality requirements are well established and implemented by the Contractor during fabrication and construction works in order to obtain formal guarantee and warranties of each paint system.
* Whilst having a direct hierarchical link with WHP QC Painting Superintendent, the CPP TOPSIDE Painting Supervisor will be integrated into EPCIC6 Package. Therefore, the CPP TOPSIDE Painting Supervisor will also report to the CPP TOPSIDE QC Superintendent and the EPCIC6 Company Site Rep on a day-to-day basis.

QUALIFICATIONS & EXPERIENCE REQUIRED
*Qualification:
o Education to HND/BTS level or COMPANY approved equivalent in engineering discipline.
o Painting and Coatings qualification level II (NACE, BGAS or ACQPA-FROSIO qualified).
* Professional Experience (number of years) : 10.
* Experience within project: (number of years) : 5.
* Construction experience is required on wellhead platform, topsides, structure, piping, pressure vessels and practical knowledge of applicable codes and standards such as EN, ISO, ASTM, NACE and SSPC. Experience on construction yard is required.
* A good knowledge of NOC Standards (equivalent to TOTAL General Specifications) and International codes/standards related to design, fabrication and inspection.
* Comprehensive knowledge in coating, painting, passivation, insulation and cathodic protection.
* Good leadership skills and good communication skills.
* Ability to work on projects in a complex and multicultural environment.
* Be skilled in using computer programs for word processing, database management, spreadsheets and e-mail communications.
* Language: English mandatory.
* H2S OPITO and T-BOSIET trainings.

We are looking for an Engineering Coordinator for one of our clients with the following details:

Location: Doha/India/Vietnam/Malaysia/Oman/China/Korea/ Singapore (to be confirm )

Work Status: Resident, Single

Mob date: 1-NOV-2023

Demob date: 31-OCT-2025

Qualification and Experience Required:

• Engineering degree in a technical discipline.
• Minimum 15 years' experience in onshore & Offshore Oil and Gas Projects with good level of understanding of all technical disciplines
• At least 5 years of experiences as Engineering Team Lead/Coordinator managing multidiscipline activities.
• Good knowledge of industry codes, standards and legislations on SHE aspect,
• Good knowledge of TOTAL GS (shareholder) is a plus.
• Experience of FEED and Detailed Design Engineering technical management
• Experience of CPY engineering team lead is a plus.
• Fluency in English (speaking and writing).
• Strong leadership skills and good communication skills,
• Ability to work on projects in a complex and multicultural environment,

Activities

Ensure Engineering Dossier are delivered with a robust definition and fit for purpose design that can be procured, fabricated, transported, installed, and operated safely, meeting the requirements of COMPANY standard, project basis of design, and SOR.

• Manage, control, and coordinate the proper realization of the engineering development for RUYA B1 CPP package. Ensure the good progress of engineering in compliance with project specifications and procedures, time schedule, required level of quality and safety.
• Identify technical decision to be made by defining the subject, proposing the clear way forward for these decisions and managing the execution in agreed timeframe.
• Identify any optimization / improvement in the design dossier to be implemented in the early stage of detailed design, promote, and encourage submissions of value engineering proposals
• Supervise and promote fit for purpose design to reduce and to optimize planning and costs.
• Ensure that relevant feedback/lesson learned from previous similar projects are considered in the design performance.
• Capture gradually all the lesson learned and feedback on design within the package and communicate the outcome to package and EMT.
• Coordinate issuance of project response to contractors and vendors requests on engineering design clarifications, TQRs, derogation.
• Closely monitor the weight evolution of topsides and jackets through update of the weight reports, guaranty protection of company contingencies and keep weight increases within approved limits.

Support Package Engineering Lead for planning, organizing, execution and control of full life cycle of engineering management activities from initiation to close out.

• Assist Package Engineering Lead in development of Package Engineering Execution Plan to create baseline for engineering scope, schedule, cost, risk and resources.
• Assist Package Engineering Lead and EMT to define package engineering maturity index, review the development and execution of engineering gate and readiness assessment.
• Assist in risk management and change management activities at package level by identifying potential risks and changes to the package baseline and providing accurate and clear information to Package Engineering Lead.
• Assist in performing engineering audit for CTR Engineering organization, that include audit of engineering process, engineering resources and engineering deliverables development.

Ensure efficient and effective interface management and coordination within engineering team, as well as with COMPANY entities, and external parties to control proper realization of project engineering development.

• Coordinate and lead weekly meetings with Engineering Disciplines to review the technical issues, blocking points, engineering progress, area of vigilance and concerns.
• Prepare technical engineering management reports detailing issues and decision to be made to ensure accurate information is available to Package Engineering Lead for decision making and opportunities.
• Ensure close coordination within engineering disciplines on all engineering, constructability and operational matters,
• Ensure that engineering technical issues are identified, allocated, actioned, tracked, and addressed.
• Assist in preparation and attend to project studies including model review, HAZID, constructability review, PRs and other studies as directed by Package Engineering Manager
• Support the closure of project technical review points that need liaising with other COMPANY entities.
• Coordinate and support overall project closeout, including completion documents, As-built, engineering, deficiency corrections and handover process.
• Participate in weekly and monthly engineering meetings with Contractors, and in specific ad hoc meetings as required by packages/projects.

Ensure thorough, efficient, and timely review of project documents by engineering team, realization of potential derogations to the standards, and challenge the design to achieve an optimize and fit for purpose outcome.

• Ensure project documents are reviewed and commented on by engineering disciplines in a timely manner and in accordance with COMPANY standards, project specification and contractual requirements.
• Ensure proposed design by Contractor are challenged/reviewed by Engineering Team in order to achieve fit for purpose outcome.
• Define, follow up and evaluate the project studies to be carried out by Contractors, ensure the studies completed as per approved project gate and maturity in close coordination with discipline leads and package engineering lead.
• Liaise with discipline leaders to identify/review the protentional deviations/derogations to the COMPANY to ensure deviation package is mature for CMS submission and approval.
• Consult E&C department and other COMPANY entities to process derogation requests and interface with relevant TRP to secure needed approvals.

If Interested Kindly apply.

We are looking for a Batch 1 Senior Contracts Engineer for one of our clients with the following details:

Location: Doha/India/Vietnam/Malaysia/Oman/China/Korea/ Singapore (to be confirm)

Work status: Resident, Single

Start date 01-NOV-2023

End date: 31-OCT-2025

Resignation: 2 months' notice period

Qualification and Experience Required:

• Graduate degree from a recognized University in the discipline.
• Graduate with a good level of contractual understanding, with at least 8 years' experience of contracts management on onshore/offshore oil & gas project.
• Fluent in English (speaking and writing) with sound communication skills.
• Good knowledge of standard contracts and CFT process
• Good knowledge of GEP for tender execution.

Activities

• Promote & comply with applicable safety instruction and other Company HSE procedures in all activities.
• Carry out work in compliance with Company values and policies, relevant laws and regulations, agreed Company priorities and objectives, Company standards and procedures and good industry practices.
• Treat all information obtained during the course of the work with confidentiality.

Job Descriptions

Contract Tender Phase

Administer the tendering process during EPC CFT to ensure the "due process" is respected and timely progress is achieved, including preparation and issuance of communication documentation with Tenderers, organisation of tender clarification meetings, organisation of tender correspondence, update of a register and filing, etc.:

• Prepare the Call for Tender documentation and specific Tender and Tender Evaluation Procedures in line with Project and Company procedures.
• Ensure consistency in various contract documentations and deliverables and ITT documents.
• Liaise with the relevant Major Projects Manager(s) in Charge of technical issues (DUET) to ensure that these are adequately incorporated into the tender process.
• Collaborate with various cross departments to ensure timely CFT preparation and readiness.
• Manage, monitor and control (in liaison with C&P entity) all required contractual processes for CFT, ensure that all recommendations are made as per the best contractual and commercial terms.
• Ensure Project team are kept up to date with tender progress and developments, obtain any necessary attendance at meetings and obtain all necessary approvals.
• Prepare clarification meetings with potential bidders during various stage of CFT
• Actively report CFT progress and advise on potential delays, put forward suggestions for improvements in cost and schedule
• Validate Tenderer compliance with Bank Guarantee, Parent Company Guarantee requirements, Insurances and the like.
• Evaluate contractual proposals and assist in evaluation of technical and commercial proposals where applicable.
• Assist in the preparation of the Tender Recommendation Report and the Recommendation to Award.
• Prepare and participate to the contract committee.
• Prepare final contract documents and obtain signatures for execution of the contract.
• Manage close out the Pre-contract phase (e.g., notification of unsuccessful Tenderers, storage of tender documentation and correspondence).

Contract Execution Phase

Post award, the Contract Engineer is directly responsible for ensuring the Contracts assigned are executed in accordance with the agreed contractual terms and conditions and that Company interest is protected at all times:

• Develop within area of responsibility: Project Contract procedures and execution plans.
• Provide advice to the Company representative on contractual issues and prepare / validate all contractual correspondence.
• Update of a correspondence register and filing.
• Analyse requests for change orders and prepare / validate change order documents where appropriate.
• Handle Contractor claims, prepare counter claims - liaise with Project team & other entities as necessary.
• Ensure all contractual certificates, guarantees and insurances required under the Contract are in place and in the due time.
• Prepare certificates to be issued to Contractor by Company in accordance with the contract.
• Coordinate the processing of Contractor's monthly applications for payment and verifying invoice submissions.
• The Senior Contract Engineer is responsible for maintaining a database which tracks existence and the evolution of contracts, change orders, certificates, approvals, and the like during the life of the project for the Contracts assigned.
• The Senior Contract Engineer is responsible for the maintenance of all contractual data necessary to be recorded in PALM (ERP system) for establishing commitments, their follow up and invoice payment for Contracts assigned.
• To carry out any other duties or tasks that may be assigned by hierarchical superiors.

If Interested Kindly apply.

We are looking for Material Engineer one of our clients with the following details:

Start date: ASAP.

End date: 1 year renewable

Location: The Project QC & Material engineer position is based in Louveciennes, France

Frequent travels to subcontractors' facilities, and suppliers' facilities in Europe is expected. It could be necessary to spend 3 to 4 weeks at the subcontractors' facilities at the start.

Qualification and Experience Required:

Job Requirements:

• Degree in Material Engineering
• Minimum 5 years of experience as Material Engineer & QC
• Welding certification is a plus (IWS,IWT,CSWIP,AWS)
• NDT certification or strong knowledge in RT, AUT appreciated.
• Pipeline and/or piping project experience in cryogenic service is a plus.
• Proven Knowledge of ASME B31.3 and ASTM standard references
• Knowledge of industry processes, codes & standards, including welding, NDT, and coating
• Strong leadership, coordination, and organization skills
• Solution oriented, with focus on customer satisfaction and attention to detail
• Fluent French and English technical language are mandatory.

Description of the Function:

• The Project QC & Material Engineer is in charge to work in close collaboration with the QA/QC & Engineering department (Procurement & Fabrication) to provide any material & welding support and expertise. He/ She will act as a technical support for the review and issuance of project documentation, actively participates in resolution of technical matters, follow the procurement and fabrication activities related to the project.

Key Responsibilities:

• The Job Holder is responsible, within the LNG team, for following-up, monitoring and supervising Quality Control (QC), Manufacturing & Inspection activities carried out by our Sub Supplier's during the Engineering, Procurement, Supply, & Construction phases, ensuring that QC contractual and technical requirements are duly applied by Sub Suppliers and Supplier.
• The Job Holder is also accountable for demonstrating, individually, an exemplary behaviour regarding HSSE rules & requirements.
• The Job Holder shall have multi discipline skill (Material engineering, ASME codes VIII, IX, V B31.3, ASTM, computing pack office, email…)
• The Job Holder can participate in routine and random inspections / tests, etc, performs QC visits and tours and ensures an adequate reporting (areas of concerns, problems encountered in the implementation of the QC Inspection Plan by the Sub Supplier) is monitored and shared with the QA/QC Manager.
• The job holder is responsible for identifying and coordinating such inspection requirements in conjunction and upon request from with the QA/QC Manager.
• In general manner, the job holder helps the Procurement team but can also assist the Fabrication package (located in Ranville (14) France) with: Quality related matters associated within PLNG scope of work.
• The Job Holder is in charge to ensure any non-conformity are correctly identified, reported and correctly managed with the QA/QC Manager
• The Job Holder is also in charge (upon QA/QC Manager request) to monitor and follow any Procurement PO and scope of supply in Europe.
• The Job Holder shall issue detail inspection report after each site visit.
• The type of scope of supply related to the project are detailed below:

Material and equipment:

• 36 Ni INVAR grade pipes (40in / 34in / 28in)
• 304/304L ASTM bulkhead
• Low temperature Carbon Steel (LTCS) pipes 40in
• 304 / 304L & INVAR, forging
• Induction Bend's (40in / 34in)
• Welding, NDT & coating activities
• Bulk material sourcing (Inconel, 304/304L)

Codes and Standards

• ASME B31.3 Piping Process
• ASME VIII (Div 1 & 2)
• ASME IX
• ASME V
• ASTM
• API
• EJMA 10 edition

If interested kindly apply.

Poste: Acheteur Projet

Durée: 12 Mois

Lieu: Louveciennes, dans le département 78, Des déplacements de courte durée en France et à l'étranger sont à prévoir sur les sites de production, chez les fournisseurs ou les clients

Statut: Résidentiel

Objectif de la mission:

• L'acheteur intervient de manière cruciale, principalement dans le traitement des lots d'équipement à long délai, exigeant une surveillance rigoureuse de la production. Il sera chargé d'effectuer tout ou partie des fonctions clés suivantes :
• Gestion de la documentation technique :
• Analyse approfondie des spécifications techniques du client et des normes applicables.
• Examen des documents techniques essentiels pour lancer les appels d'offres d'approvisionnement (spécifications, fiches techniques, requêtes techniques) et garantie de leur préparation pour transfert aux fabricants/sous-traitants.

Sourcing et qualification des fournisseurs:

• Sourcing de prestataires capables de répondre à nos critères de sélection.
• Lancement des processus de préqualification sous la supervision du Département de la Gestion de la Chaîne d'Approvisionnement.

Préparation, lancement et suivi des appels d'offres:

• Préparation des dossiers d'appels d'offres et distribution aux fournisseurs potentiels.
• Analyse des propositions et gestion active des clarifications techniques et commerciales.
• Supervision des évaluations techniques et commerciales des offres diverses et préparation des documents de prise de décision.

Suivi des commandes :

• Animation des revues critiques avec les fournisseurs : réunions de démarrage, réunions de pré-production, réunions de clôture.
• Surveillance de l'avancement des différents fournisseurs grâce à des rapports et des réunions régulières.
• Examen des documents des fournisseurs et coordination avec les disciplines du projet pour la validation des documents d'Ingénierie, de Qualité et de HSE.
• Lancement de notifications et collaboration avec des entités externes (Inspection Tiers) au besoin.
• Communication avec le Responsable Qualité Projet pour suivre les non-conformités des fournisseurs.
• Collaboration avec le Responsable HSE Projet pour superviser les incidents environnementaux, de santé et de sécurité impliquant les fournisseurs.
• Évaluation des fournisseurs à la fin de la commande.
• Gestion de toutes les demandes de modification de commande initiées par Léntreprise ou les fournisseurs.
• Maintenance du Rapport d'Approvisionnement du Projet (RAP) :
• Maintien du RAP pour tous les lots d'achats attribués, à la fois en phases pré- et post-commande.

Soutien à la Gestion de Projet:

• Aide à la mise à jour régulière des coûts et des plannings pour les lots d'achats attribués, en collaboration avec le Responsable de la Gestion de Projet.
• Structure de Reporting : L'acheteur relève de manière opérationnelle du Responsable de l'Approvisionnement Projet et fonctionnellement du Responsable du Département de la Gestion de la Chaîne d'Approvisionnement ou de l'Ingénieur Responsable de la Chaîne d'Approvisionnement d'Entreprise.

Compétences Techniques:

• Un diplôme en ingénierie mécanique/matériaux est préférable ; à défaut, un diplôme en approvisionnement industriel avec une expérience technique substantielle.
• Au moins 7 ans d'expérience dans le secteur du pétrole et du gaz, de la construction marine ou de l'énergie EPC.
• Maîtrise des normes techniques spécifiques à l'industrie et à l'approvisionnement, y compris en matière de Qualité, de Santé, de Sécurité et d'Environnement.
• Maîtrise de l'anglais et du français.
• Permis de conduire B valide depuis plus de 5 ans.

APPLY NOW

We are looking for an ICSS Lead - Riser Platform for one of our Clients with the following details :

Start date: 01-NOV-2023

End date: 31-OCT-2025

Location: Doha/ India/Vietnam/Malaysia/Oman/China/Korea/ Singapore ( to be confirm )

Work Status : Resident, Single

Qualification and Experience Required:

• Qualification: Engineering degree in instrument and control engineering,
• Experience: minimum 15 years' experience as ICSS engineer in Oil and Gas offshore activities.
• At least 3 years of experiences as Lead ICSS Engineer supervising a team.
• Extensive experience in ICSS engineering with relevant experience within the offshore oil and gas production industry,
• Computer literate, especially in ICSS calculation software and programming.
• Strong leadership skills and good communication skills.
• Good analytical skills.
• Familiar with general specifications is a plus, and with relevant codes and standards,
• Language: fluent English,
• Ability to work on projects in a complex and multicultural environment.

If Interested Kindly apply.

Position: Quantity surveyor

Location: Lumut Brunei

Duration: 17 Months

Mobilization: 1 November

Mission:

• Understand the work scope and give great attention to detail.
• Monitor the cost of site resources.
• Inspect and then value completed work.
• Set up the project cost projection system to allocate the cost as per the requirements.
• Review BOQ for Electrical, Instrumentation, Structural, Mechanical, Piping and Civil disciplines.
• Check all revised drawings as they arrive and alter Quantity Sheets as necessary in conjunction with the Planning Engineer.
• Carry out measurements on site and prepare in term evaluations to include all values relating to labour, materials, and equipment
• Verify estimate time of job cards
• Make and maintain an accurate up to date measurement of all material installed in each area.
• verify documents for variation orders / pricing of quantity for variation orders.
• Perform periodic reconciliation of quantities with contractor to calculate construction budget with progressive accuracy.
• Participate and feed inputs in identifying areas of risk/scope and monitor with the project team.
• Review extension of time claims
• Preparation of final jobs close out report and analyzing with theoretical quantities verses actual quantities and preparation of as built drawings.
• Prepare monthly reports and construction budget forecasts
• Execute and/or supervises site quantity surveys in compliance with specific Company procedures.
• Work closely with Company supervisors to give them a greater commercial awareness.
• Attend project meetings and ensuring all stakeholders are kept up to date, informed of project progression and any issues

Qualifications/Experience required:

• Professional Experience: minimum 10 years in the oil and gas industry.
• Experience in an international environment is preferred.
• Fluency in English.
• Capable of handling the relevant IT tools (Office pack…).
• Qualifications: university or regional college studies

Apply Now

Our Client is looking for CONSTRUCTION MANAGER for a SOLAR PV Project with the following details :

Location : Quilemba, Angola

Duration : 1 year, renewable

Work Status : Resident, Single

Key Requirements

• A bachelor's Degree in any discipline of Engineering
• Portuguese and English speaker
• Minimum of 10 years of experience in construction of power plants (technology based)
• Project Management Professional (PMP) OR equivalent certification is preferred
• EPC background and experience is a must
• Project size experience to match the size of the project at hand
• A minimum of 1 project construction completed.
• Be knowledgeable on international standards and 'best practice' in relation to construction
• Be knowledgeable on environmental legislation and good industry practice in relation to construction works
• IT proficiency, in particular, MS Word, MS Excel, or similar

Job Responsibilities

• Be fully aware of EPC Contract, O&M Agreement and various Project Agreements and manage thestake holders effectively in line with the contracts.
• Organizing the integrated site team in order to supervise the EPC Contractor's construction progress, quality of the works, including commissioning until COD (i.e. inspection witnessing,
• clearing punch list items, issuing mechanical completion certificates, turnover packages readiness, checking and implementing commissioning procedures…);
• Ensures the EPC Contractor's compliance with all the site HSE rules and regulations at every stage of construction;
• Ensures the EPC Contractor's compliance in executing of the works with the approved Method Statements/ Risk Analyses and regulations at every stage of construction;
• Organization of the site lay-out, offices, storage area, etc.;
• Assists to the weekly site meetings , progress and/or discipline technical meetings with EPC Contractor;
• Monitors and check the EPC Contractors' work across each discipline to ensure the timely delivery of the works;
• Provides the PD the inputs for the monthly progress reports, relevant information to check EPC Contractor invoices.
• Verification of the site logbook managed by the EPC Contractor. Issue the O/OE logbook;
• In cooperation with the schedule engineer,
• follows up of the actual progress versus planned values,
• Ensures that the critical activities are executed according schedule, and looks for opportunities to create margin within the critical path.
• analyses the works and imposes optimizations towards the Contractor where possible
• evaluates and approves all recovery plan of the delayed activities to secure the overall schedule
• supports the schedule engineer in drafting the progress reports towards PD/EMD;
• Daily management of on-site technical personnel (hours present, leave, etc.) for the personnel reporting directly to him, in cooperation with HR manager

Our Client is looking for Quality Manager for a SOLAR PV Project with the following details :

Location : Quilemba, Angola

Duration : 1 year, renewable

Work Status : Resident, Single

Job Requirements :

• Portuguese speaking Nationals, preferred
• With SOLAR PV Project experience

Our Client is looking for a Commissioning Manager for a SOLAR PV Project with the following details:

Location: Quilemba, Angola

Duration: 1 year, renewable

Work Status: Resident, Single

Job Requirements :

• Portuguese speaking Nationals, preferred
• With SOLAR PV Project experience

Kindly Apply

Position: Naval Engineering Services

Duration: 12 Months Renewable

Status: Resident

Mobilization: ASAP

Location: FRANCE / Paris area first, Then depending on FEED Contractor location, FRANCE / Paris area OR UK / London (Worldwide missions to be forecasted due to spread of work-packages and Contractors' locations; frequent missions in Angola.)

The service holder shall ensure the following missions:

• To take the responsibility, under the Hull Buoy and Mooring Manager's, of part of the activities, as defined by his hierarchy:
• Ensuring that Engineering / Qualification / Procurement activities are performed in line with Contracts requirements and Project Specifications, all within project schedule
• Ensuring that Engineering / Qualification / Procurement activities are performed in line with The Company General Specifications and issue proper derogations, if required
• Supporting during tendering process
• Following up the Naval Engineering / Qualification / Procurement activities
• Follow up FEED contractor engineering regarding naval engineering
• Direct the FEED contractor to effective resolution of all interface matter related to naval engineering
• Ensuring correct and timely information is provided by FEED contractor to other contractors
• Assisting in interface management with other packages
• Answering FEED Contractor technical queries as necessary
• Ensuring that HSE requirements are taken into consideration during design
• Getting assistance from The Company specialists, or third parties, if required, for specific topics
• Coordinating with TEPA as necessary
• Providing inputs to contract correspondence, as necessary
• Issuing reports and presentations as necessary
• Participating in various technical reviews (Hazids, Hazops, Project Technical Reviews, Risk
• Assessments…) and ensuring implementation of recommendations as necessary
• Liaising actively with all concerned technical specialists involved in the technical development / management of said contracts. The service holder shall also have to liaise actively with other Line Managers (HSE, QA and LC) and with specialists from Project Services (planner, budget, and cost control) for the development / management of contracts.
• Performing the close-out of Contract(s) with respect to TEP Angola and Project procedures.
• Participating in reducing contractual risks associated with interfaces with other packages and highlighting potential risks occurring during the execution of the contract.
• Timely reporting to the HBM Manager, assisting him, as required, in communication with Project
• Management, and highlighting progress and encountered areas of concern.

HSE:

• To ensure that all safety and environmental required studies will be reviewed/updated, and that final design will comply with ALARP policy,
• To ensure that the design will comply with all HSE requirements,
• To attend safety inductions as required and adapt behavior to fully comply with office security, health, and safety instruction,
• To stay vigilant and maintain continuous awareness of hazard and surroundings,
• To participate to local programmes or initiative to improve HSSE performance,
• To report to Management on any issue or observation and propose way of improvement

Qualifications & Experience Required:

• Qualification: Engineer or equivalent
• Languages: English mandatory - Portuguese would be a plus
• Professional Experience: 15 /20 years in Oil & Gas industry on Offshore Projects / Fields
• Experience within project: ± 10 years with sound engineering experience in naval engineering

APPLY NOW

Position: PV Electrical Engineer

Location: Quilemba, Angola

Resident Status: Single status

Duration: 1 year renewable

Mission:

• Be fully aware of EPC Contract, subcontracts for electrical works and various Project Agreements
• and manage the electrical construction stakeholders effectively in line with the contracts.
• Ensures the EPC Contractor's and subcontractors' compliance with all the site HSE rules and
• regulations at every stage of the electrical construction;
• Ensures the EPC Contractor's and subcontractors' compliance in executing of the electrical
• works with the approved Method Statements/ Risk Analyses and regulations at every stage of

Construction;

Tasks:

• Organize the integrated site team in order to supervise the EPC Contractor's construction progress, quality of the works, including commissioning until COD (i.e. inspection witnessing, clearing punch list items, issuing mechanical completion certificates, turnover packages readiness, checking and implementing commissioning procedures…);
• Provides input into the weekly site meetings, progress and/or discipline technical meetings with
• EPC Contractor;
• Monitors and checks the EPC Contractors' work across each discipline to ensure the timely delivery of the works;
• Confirms and provides the PD with the inputs for the monthly progress reports, relevant information to check EPC Contractor invoices.
• Verification of the site logbook managed by the EPC Contractor;
• Objectives/Accountabilities
• In cooperation with the schedule engineer, and in relation to the electrical activities:
• Follows up of the actual progress versus planned values, ensures that the critical activities are executed according to schedule, and looks for opportunities to create margin within the critical path.
• Analyses the works and imposes optimizations to the Contractor when possible
• Evaluates and approves all recovery plan activities related to electrical works for the delayed activities to secure the overall schedule
• Supports the schedule engineer in drafting the progress reports for the PD/EMD;

Key Requirements

Experience and qualifications required:

• Bachelor's Degree in Electrical Engineering or similar
• Minimum of 10 years of experience in construction of industrial facilities
• Project Management Professional (PMP) OR equivalent certification is preferred
• EPC background and experience
• Experience with projects valued at over $50 million
• A minimum of two construction projects completed
• Knowledgeable of international standards and 'best practices' for construction
• Knowledgeable of environmental legislation/regulations and good industry practice related to
• construction works
• Proficient in MS Word, MS Excel, MS PowerPoint or similar
• English and Portuguese speaker

Apply Now

We are currently looking for "Pipeline Design Engineer" for an Oil and Gas Company in Paris, France.

Duration: 1 year renewable

Minimum Requirements:
Rigid Pipeline and Riser DESIGN services, to help the Pipeline and Riser technology specialist team within the division.

Involved in a wide range of pipeline Design activities all along the pipeline life cycle, from early development and conceptual studies, FEED to detailed design and integrity management.

Interested Applicants can share their profile ASAP