We are looking for an E&I Lead for one of our clients with the following details:

Location: Basrah, Iraq

Start Date: MARCH 2026

Contract Duration: 6 months

Scheme: Rotational 28 days ON / 28 days OFF

Qualification and Experience Required:

• We are looking for an experienced E&I Lead in onshore Greenfield and brownfield project with a very good knowledge of company General Specifications, rules, procedures and International Codes and Standards.
• Bachelor's degree in engineering or construction field.
• 10 to 15 years of experience in the oil industry, with significant experience in Construction. Previous experience under SIMOPS works will be considered as a plus.
• Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team.
• Fluent in English, Arabic is a plus

Activities

HSE activities:

• Support and enforce project guidelines, HSE objectives and global improvement (e.g. referential, Golden Rules, reporting, REX, audits, Maestro, trainings, HSE action plans…).
• Responsible for the respect of the HSE Rules and Company Specifications for his activity (also in term of QA & QC)
• Attend HSE meetings and training when necessary.
• Initiate and/or Participate in Job Safety Analysis, make suggestions, stop dangerous situations, and report anomalies and dangerous acts.
• Conduct toolbox talks and enforce safe work practices

Asset Integrity:

• Contributes to the project Asset Integrity initiative by reporting any anomaly, defect, bad practice, lack of equipment, lack of competence that could result in a major HSE incident or loss of production.

Daily Activities and missions:

• Supervise and coordinate construction activities for Electrical and Instrumentation directly with the Contractor.
• Follow up and ensure the selected Contractor's to carry out works in their premises in prefabrication and under construction on the Sites
• Ensure adherence to project specifications, drawings, and quality standards.
• Lead E&I work preparation and execution with Contractor to ensure adequate progress in line with planning and project milestones
• Prepare, Review and validate construction methods and work instructions closely with the construction contractor
• Ensure the proper execution of the works in compliance with safety and environmental protection procedures, technical specifications, budgets, and schedules,
• Check the procedures and task sheets of the Companies, participate, or control the risk analyses, help in the preparation / check the work permits,
• Resolve technical issues on-site in coordination with engineering teams.
• Manage subcontractors and ensure proper allocation of manpower and equipment.
• Optimize and follow up the work schedules, to do this check the good organization of the logistics and the Contractor's site Control material deliveries and verify conformity with project requirements
• Anticipate all potential problems, propose, if necessary, alternative "practical" solutions,
• Organise Pre-commissioning activities, formalize handover dossier to Field Operations, ensure that mark-up documentation is reflecting the site condition and forward those to Engineering.
• Monitor progress and report daily to the Construction Manager
• Maintain good relationships with contractors, displaying flexibility when needed while also enforcing necessary standards.

We are looking for a Site Civil & Structural Supervisor for one of our clients with the following details:

Location: North Rumaila. Iraq

Scheme: Rotational 28 days ON / 28days OFF

Start: 1st June 2026

Duration: 24 months with possibility of extension

Professional experience:

• Degree: Diploma/ Degree in Civil Engineering.
• Minimum 10 years of experience in Oil & Gas Industry or Heavy industries with similar large-scale projects and context in Contract. Engineering and Construction activities for Onshore (or Onshore yards) projects.
• Proven track records of several successful assignments on similar site positions.

Technical competencies:

• Broad civil and structure technical experience across all aspects of major Surface Facilities project development.
• Sound knowledge and experience in other disciplines (notably E&I and piping) of Engineering and Construction for Onshore and Nearshore projects is considered a plus.
• Vast and concrete knowledge of monitoring of large Oil & Gas EPC Contractors at site.

Behavioural competencies:

• Ability to adapt and to represent the company in discussions and meetings with contractors and stakeholders.
• Ability to embrace and closely monitor Environmental. Social Performances and Security requirements as critical aspects of the Site Project Execution.
• Proven records of ability to effectively integrate a team and adhere to team-spirit rules. Demonstrate sound organization ability and work in a multi-cultural/international business environment.
• Strong Leadership Good interpersonal and communication skills; Good motivational skills.
• Dedication and ability to work under pressing conditions.

The main missions and activities of the Job Holder are as follows:

• Be a proactive and team-spirit driven member of the CPF-2 Site Construction team.
• Participate to the review and approval of site construction procedures/method statements. Identify and make recommendation as to areas for improvement in constructability related issues.
• Supervise and control the Civil & Structure activities performed by the CPF-2 Site Contractors.
• Check fitness of the Contractors construction equipment (report any HSE issues) and adequacy of Contractor personnel mob/demob for each activities he is in charge of supervising.
• Ensure Contractors compliance to the technical and safety/environmental Contract requirements.
• Maintain good relationships with Contractors. being flexible enough where relevant (strive to achieve value at every opportunity) but also enforce rigorously procedures when required.
• Report any Quality Control issues to the CPF-2 Site Quality QC team for proper resolution.
• Monitor and track the progress of Civil & Structure activities. Provide inputs and report issues to the CPF-2 Site Construction and Project Support team.
• Facilitate the management/resolution of short term co-activities issues.
• Provide inputs to the field engineering group to ensure timely resolution of engineering issues that materialize at Site level.
• Assist in reviewing optimizing short/medium term construction sequences for the benefit of the overall construction schedule and potential recovery plans.
• Participate to meetings with Contractors and Affiliate's departments as required.
• Promote and support a positive safety culture within the CPY Site Team and with the Contractors.
• Act as an example in all H3SE aspects concerned by the Project activities in the Site area (including surrounding communities' areas).
• Adopt and demonstrate exemplary behaviour regarding Ethics and Project "code of conduct" policy.
• Observe strict confidentiality in the performance of his duties. all along the course of the Project.
• Carry out any other duties or tasks that may be required by the position.

If you are interested, kindly apply!

We are looking for a Subsea Coordinator for one of our clients with the following details:

Location: Doha, Qatar

Contract Duration: 1 year (with possible extension)

Qualification and Experience Required:

• Experienced HSE Top Up Diver & preferably Closed Bell Diver (or equivalent)
• IMCA Air Dive Supervisor or IMCA Closed Bell Supervisor
• Preferably C.S.W.I.P 3.1u (or higher)
• Preferably Introduction to Dive System Auditing Course
• Preferably Introduction to DP course
• Experience with SPM maintenance, Inspection Repair Maintenance (IRM), Subsea Umbilicals, Risers & Flowlines installation (SURF)
• Must have at least 10 years of experience as Diving Superintendent

Job-Specific Skills (Generic / Technical):

• Capable supporting multiple activities with a high degree of accuracy against defined deadlines
• Excellent verbal and written English skills
• Strong technical and problem solving skills
• Strong supervisory, communication, and interpersonal skills
• Strong organizational, coordination, planning and interface skills
• High level of proactivity, negotiating and influential skills
• Proficient in MS Office suite of software programs
• Preferably Proficient in MS Project
• Valid OPITO H2S and T-BOSIET trainings

Job Purpose & Key Accountabilities:

• The purpose of this role is to support the Diving Operations Specialist (TRP) with the supervision and monitoring of all manned and unmanned subsea operations carried out by the company, to ensure they are in line with international best practice, classification society rules, flag state, local regulations, and company standards.
• The job holder shall contribute and participate in the application of a robust audit and assurance program on personnel and equipment mobilised to support company subsea work scopes, reducing the company's exposure to major risk.

Job Dimensions:

• The role requires a high level of proactivity, organizational skills and a good understating of underwater operations and guidelines to ensure the departments activities and fully supported, optimized, documented, and safely delivered.
• The job holder acts as DoA for the Diving Operations Specialist (TRP)
• Number of Vessels Supported: 1+
• Number of Contracts Supported: 2+
• Number of People Supervised: Nil
• Number of Audits: 10+ (annually)

Activities:

HSE

• Demonstrate an Incident Free attitude through establishing and maintaining a strong safety culture.
• Ensure all activities carried out under the supervision of the role comply with the companies HSE policy.
• Propose & monitor strategies and technology to support the companies GHG reduction targets.
• Support Incident Investigations and reporting processes, ensuing identification of root causes and capturing of lessons learned.

Financial

• Demonstrate a cost focus culture to ensure sustainable value is delivered.
• Demonstrate cost efficiency within the area of responsibility.

Operations

• Support the Diving Operations Specialist (TRP) in the creation and review of company CMS standards and guidelines.
• Support and encourage the development of local talent, ensuring development plans are followed, experience and knowledge shared.
• Document and record department performance KPI's as agreed by N+1 and N+2
• Support resolution orientated communication and strategic connection among critical stakeholders to implement solutions in a timely manner.
• Ensure CMS rules, standards, policies, and guidelines covering subsea personnel and equipment are applied and monitored in accordance with international regulations and standards, classification society, flag state, local regulations, Industry best practice and company procedures.
• Maintain a robust audit and assurance program, ensuring personnel and equipment mobilised to support company subsea operations are in full compliance with international regulations and standards, classification society, flag state, local regulations, Industry best practice and company procedures.
• Support contract management, ensure contractors are in full compliance with procedural and contractual requirements.
• Support operational changes, delivering solutions to improve efficiency and reliability.
• Ensure the N+1 routinely provided with highlights, concerns and trends related to company subsea activity.
• Participate in industry forums related to subsea operations.

If Interested Kindly apply.

We are looking for an ICT BIM Modellers for one of our clients with the following details:

Location: Dubai, UAE

Notice: 1 month or less

Qualification and Experience Required:

• ICT BIM Modellers with strong capability in BIM production (ICT/airport experience) and coordination across multiple trades.
• Client is specifically looking for a candidate who is capable to produce BIM designs mandatorily (should be proficient on BIM software).
• Should be technically sound - production experience is very important and should also have experience of coordinate with other departments/teams such as structural, Architectural, Mechanical, Electrical on ICT & Airport (SAS) systems.
• Mandatory proficiency in BIM software (Revit, Navisworks, etc.)
• Strong technical and production experience in BIM modeling
• Hands-on experience in ICT systems, preferably in airport projects
• International project experience is mandatory
• Ability to effectively coordinate with multiple engineering disciplines

Key Responsibilities

• Develop detailed BIM models for ICT and Airport Systems (SAS)
• Produce high-quality BIM design deliverables (models, drawings, documentation)
• Ensure models are accurate and aligned with project and construction requirements
• Coordinate ICT designs with Structural, Architectural, Mechanical, and Electrical teams
• Participate in multi-trade coordination and clash detection/resolution

Please email cv on

If Interested Kindly apply.

We are looking for a Commissioning Manager for one of our clients with the following details:

Start Date: ASAP

Service Location: Jubail, Saudi Arabia

Service Status: Resident

Estimated Service Duration: 12 months (renewable)

Activities:

• The service provider will have to supervise EPCC Contractors construction activities, in order that the field activities are completed (AOC reached) as per the Project schedule.
• Good knowledge of erection work execution.
• Advanced relevant construction work experience, preferable in Middle East Oil & Gas industry.
• Strong knowledge of construction safety standards.
• Interpersonal skills: ability to work with others in collaborative manner.
• Ability to efficiently manage multiple tasks and priorities simultaneously and ability to manage changing priorities.
• Experience in integrated projects and joint Venture organizations.
• Knowledge of safety and environmental aspects of major construction projects.
• Ability to adapt to changes and to work in an international multi-cultural project environment, to cope in a positive and productive manner within intensive environment. Interpersonal skills, rigor, and analytical mind.
• Ability to work as a member of a project Team, to liaise, coordinate and positively communicate with the involved different Parties (Contractors, project Entities, auditors, other disciplines representatives, experts, project people, PMT EPCC packages, etc.).

Missions

• The service holder will ensure that all pre-commissioning and commissioning activities in his Package are prepared and executed according to OPERCOM® methodology and ICAPS© Mobi web in a safe and efficient manner, adhering to the planned schedule. This role involves close coordination with the EPCC package commissioning manager.
• Manage and expedite the review and approval process of the EPCC contractor commissioning plans and procedures.
• Report the project pre-commissioning and commissioning progress.
• Manage and coordinate the package commissioning supervision.
• Support the coordination of commissioning interface points.
• Oversee the reviews and approval of the commissioning dossiers.
• Ensure smooth coordination with the Manufacturing organization
• The main challenge is to ensure that the Project Commissioning is done according to COMPANY specifications and that OPERCOM® methodology and ICAPS© are consistently implemented across different site activities with various interfacing between packages. The focus will be on ensuring a smooth handover to operations. The jobholder must anticipate or identify problem areas or potential conflicts (within the Company)

If you are interested, kindly apply!

We are looking for a RP Offshore CSR for one of our clients with the following details:

Location: Doha Qatar

Mob date: 15-FEB-2026

Demob date: 31-DEC-2026

Qualification and Experience required:

• Bachelor's degree: FIND or equivalent in related field
• Experience: At least 10 years' experience in the offshore oil & gas industry
• Extensive knowledge of industry best practice in Project Management
• Experience in offshore construction and hook-up activities under SIMOPS and Brownfield conditions is EPC supervision on client side is preferable.
• Available for technical missions worldwide.
• Familiar with company General Specifications. MANASA, and relevant codes and standards.
• Language: Fluent English.
• Computer literate
• Good leadership skills and effective communication skills,
• Ability to work on projects in a complex and multicultural environment
• Qatar or middle east experience
• Good analytical skills.
• H2S OPITO' and T-BOSIET training

Activities:

• Validating the work packs' job cards prepared by the CONTRACTOR and organizing their circulation on SITE.
• Managing permits to work for the work area and ensures compliance with the specific SimOps rules.
• Supervising the construction work and tracking its execution in various construction disciplines.
• Reporting to Lead Brownfield and Hook-up and relevant Offshore Operation Safety organization (the CSR is the main contact of the Of M and operational authorities for construction works):

Responsible for preparation and execution of construction activities (including HSE):

• With strict adherence to HSE legislation. Company standards and procedures applicable to the Prniccl.
• With compliance with Company Management System and applicable International Standards
• With good level of competency for company Supervision.

Scope and development:

• To ensure EPCIC CONTRACTOR*s readiness with all approved procedures, work method statements. Job cards, agreed optimized Level 4 activity micro-schedule, required resources (including manpower. equipment.
• Tools, specialties, marine spread. subcontractors. vendors etc.) to facilitate the execution of offshore activities.

With the support of his supervision team. he would:

• Participate in all Construction offshore meetings with CONTRACTORALIBCONTRACTORS and

SITE authorities.

• Ensure that all installationhook-up documents and drawings are verified and compliant to technical requirements.
• Ensure that CONTRACTOR has adequate resources (equipment and manpower) mobilized for all

disciplines per approved micro-schedule.

• Ensure that all required inspections. audits and equipment certification are performed on time and that all corrective action plans arc properly implemented by CONTRACTOR.
• Ensure timely completion of the work and monitor closely CONTRACTOR performance and progress with respect to approved micro-schedule.
• Ensure that all installation. pre-commissioning and commissioning activities are properly executed per sequence stipulated in the micro-schedule for startup readiness.
• Ensure that incomplete activities arc property tracked and recorded and tracked with the right categorization in the punch list management systan.
• Liaise with Certification Authority, as required to ensure compliance with rules and regulations.
• Review, validate or correct the daily/weekly:monthly SITE progress.
• Stop the work when necessary & report immediately to CONTRACTOR about any anomaly.

violation & unsafe act' practices.

• Participate as Company Representative in the regular USE Committee meetings & Safety Tours.
• Maintains good relationships with Site Authorities, CONTRACTOR, while being firm on achieving

the project objectives.

To effectively manor. manage. control and drive his Supervisions team assigned on site. In this regard. he would:

• Establish a clear policy for delegation and responsibilities to his team, in term of scope of work.
• Schedule and deliverable requirements.
• Provides HSE advises or technical support to his construction team as necessary.
• Analyze / resolve issues and problems encountered by his Construction supervision team and make necessary arbitration between different disciplines! stake holders (the only criteria being the benefit of the overall project).
• Motivate all members of the team to perform the job at the highest level of quality, in compliance with schedule and cost objectives.
• Inform and ensure that relevant decisions directions taken at Management level are comedy

understood by the team and enforced' implemented at SITE.

• Ensure that COMPANY supervision team is performing well and sufficient resources are in place to effectively manage the activities.
• Provide adequate supports and assistance during commissioning and start-up activities.
• Report on regular basis to Lead brownfield and Hook-up about installation / book-up progress, trend.
• Concerns and potential drifts on quality, schedule andlor cost.
• To propose actions plan. mitigation. corrective action etc. to Project Lead for any supervision or

control process improvement.

• Raise concern to CONTRACTOR for any installation deficiency. anomaly or non-compliance and

propose / suggest acceptable mitigations or corrective actions.

• To ensure confidentiality in project information and related documentations under his area of

responsibility.

If you are interested, kindly apply!

We are looking for a Materials & Welding Engineering Services for one of our clients with the following details:

Location: Bristol, UK (Possible travel: Indonesia, Singapore)

Planned Start Date: 16 February 2026

Estimated duration of the mission: + 6 months

Qualification and Experience Required:

Technical Requirements

Welding Engineering

• Development, review, and approval of Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR).
• Deep understanding of welding processes used in subsea fabrication, including: GTAW (TIG), SMAW (Stick), GMAW (MIG/MAG), FCAW, SAW.
• Knowledge of weld metallurgy, including: Heat-affected zones (HAZ), dilution effects, solidification cracking, and post-weld heat treatment (PWHT).
• Experience with clad and CRA (Corrosion Resistant Alloy) welding, including overlay and dissimilar metal welds.
• Familiarity with automated and orbital welding techniques for subsea applications.

Materials Engineering

• Expertise in material selection for subsea environments, including: Carbon steels, stainless steels, duplex/super duplex, Inconel and other nickel-based alloys.
• Understanding of corrosion mechanisms: Pitting, crevice corrosion, galvanic corrosion, hydrogen-induced cracking (HIC), and stress corrosion cracking (SCC).
• Application of corrosion mitigation strategies, such as cathodic protection, coatings, and material compatibility.
• Experience with material testing and qualification, including: Tensile, impact, hardness, bend, and corrosion testing (e.g., ASTM G48, NACE TM0177).

Codes, Standards & Specifications

• In-depth knowledge of international standards and specifications: ASME IX, API 6A/17D, ISO 13628, DNV-ST-F101, NACE MR0175/ISO 15156, etc.
• Ability to interpret and apply project-specific specifications and Company general specifications (GS).

Non-Destructive Testing (NDT) & Inspection

• Familiarity with NDT methods: Ultrasonic Testing (UT), Radiographic Testing (RT), Magnetic Particle Inspection (MPI), Dye Penetrant Inspection (DPI).
• Interpretation of NDT results and coordination with third-party inspectors.
• Oversight of inspection test plans (ITPs) and quality control documentation.

Fabrication & Installation Support

• Supervision of welding activities at fabrication facilities.
• Support Factory Acceptance Tests (FATs), Site Integration Tests (SITs).
• Troubleshooting welding and materials issues during fabrication and installation.

Digital Tools & Documentation

• Proficiency in document control systems and digital review platforms (e.g., SharePoint).
• Familiarity with welding data management tools and materials traceability systems.

Project Knowledge

• Familiarity with fabrication yards, welding qualification programs, and FAT/SIT activities.
• Familiarity with SPS (Subsea Production Systems) hardware: trees, manifolds, wellheads, connection systems.

Other Observations

• Organizational skills, attention to detail, team spirit
• Multidisciplinary technical coordination
• Bid analysis and clarification management
• Knowledge of HSE and quality standards
• Proficiency in office and document management tools

Missions / Service Dimensions

• This service will be based in UK, Bristol with periodical mission to Singapore & Batam to cover the SPS Contract execution. Under the responsibility of the SPS Technical Lead, the service holder will be acting as a specialist and supporting the SPS Technical Lead on all technical matters related to welding and metallurgy
• Support the SPS Package Lead during execution phase to ensure technical consistency, quality of delivered product.
• Responsible for all welding and material issues with the SPS scope of supply.
• Ensure alignment with project requirements, standards, and HSE rules.
• Work closely with the Company Site Representatives and Third-Party Inspectors to ensure all welding and material aspects are of the design and fabrication are reviewed.

HSE

• Lead by example in HSE performance, consistently demonstrating safe behaviors and promoting a strong safety culture across all project activities.
• Ensure team competency in HSE standards, verifying that all personnel are trained and capable of applying required safety practices.
• Implement and enforce HSE requirements within your scope of responsibility, ensuring compliance with project-specific and corporate safety policies.
• Integrate safety engineering requirements into all technical documentation, including welding procedures, material specifications, and inspection plans.
• Conduct regular safety reviews and audits, addressing findings promptly and ensuring corrective actions are implemented.
• Participate in risk assessments and hazard identification workshops, contributing technical expertise to minimize risks associated with welding and material activities.
• Monitor contractor and subcontractor adherence to HSE standards, intervening when necessary to prevent unsafe practices.
• Promote continuous improvement in safety performance, encouraging feedback and lessons learned to enhance future operations.

If Interested Kindly apply.

We are looking for an HVAC Engineer for one of our clients with the following details:

Location: Leatherhead, England

Start Date: 1 March 2026

Contract Duration: 24 months with possibility of 12 months extension

Qualification and Experience Required:

• Professional Experience: Minimum 8 years in HVAC practice, preferably in large-scale oil and gas sector.
• Experience in similar position: 5 years in a senior role covering HVAC activities, preferably in detailed design phase of projects.

Qualifications

• Bachelor's degree in suitable engineering discipline (e.g. Mechanical or HVAC).
• Professional Engineer (PE) certification preferred.

Technical Skills

• Strong technical understanding of HVAC practices.
• Proven ability to cover HVAC Engineering, manage design changes and deliver high-quality engineering solutions.
• Exposure to Architectural design principles would be advantageous.

Languages

• Fluent in English.

Soft Skills

• Strong communication skills.
• Strong problem-solving and decision-making abilities.
• Ability to work collaboratively in a multicultural environment
• Effective team participation, working with multidisciplinary engineers.

Main Missions

• Review all HVAC Engineering activities performed by the EPSCC Contractor to ensure successful project delivery for the facility.
• Ensure the quality of HVAC deliverables aligns with project requirements and standards. Coordinate between engineering disciplines to facilitate seamless project execution.
• Maintain compliance with project technical and safety standards throughout all HVAC activities.
• Collaborate closely with the Engineering Manager, Construction team, and Company Engineering discipline engineers to ensure timely completion of HVAC related tasks.
• Assist with prompt responses to engineering queries and unexpected technical issues to FEED Contractors.

Key Activities

• Contribute to identifying safe design opportunities to eliminate, avoid, reduce, or mitigate the HSE risks during construction.
• Work with the contractor's HVAC team to ensure all activities are delivered on schedule, within budget, and to high-quality standards considering past projects lessons learned.
• Ensure HVAC documentation produced by the contractor, including Master Document Register, is fit for purpose.
• Timely review of HVAC designs, drawings, and specifications to verify they meet project requirements and regulatory standards
• Liaise with interface entities.
• Contribute to management of design changes, ensuring all modifications are properly evaluated, documented, and communicated.
• Work closely with Company discipline engineers to integrate quality and safety considerations into all HVAC work.
• Identify technical risks and develop mitigation strategies to minimize their impact on the project.
• Ensure that any HVAC issues are promptly addressed and that all solutions are effectively communicated to stakeholders.
• Develop and maintain HVAC quality standards, ensuring all deliverables meet the company's quality requirements.
• Work in close collaboration with the Quality Lead where required to ensure compliance and address any quality concerns.
• Support preparation and participate in technical reviews and audits, provide responses and ensure timely implementation of the findings relating to HVAC Engineering.
• Provide HVAC support to procurement and construction teams, ensuring alignment throughout the project phases.
• Identify opportunities for improving HVAC processes and procedures to increase efficiency and reduce costs.
• Share lessons learned and incorporate them into future HVAC activities to enhance project delivery.

If Interested Kindly apply.

We are looking for a Piping Engineer for one of our clients with the following details:

Location: Leatherhead, England

Start Date: 1 March 2026

Contract Duration: 24 months with possibility of 12 months' extension

Qualification and Experience Required:

• 10-15 years in Oil and Gas projects as piping Lead/Sr piping engineer, Lead/Sr engineer
• Previous experience with international Engineering EPC Contractors on projects of similar scale
• Knowledge of international codes and standards related to his/her disciplines
• Knowledge of company standards related to his/her disciplines
• Advanced user of CAESAR II (for model review, independent checks, and detailed report analysis)
• Familiarity with FEA software (e.g., ANSYS, Abaqus) for reviewing specialist reports
• Proficiency in 3D model review tools (e.g., Navisworks Manage) for clash detection, constructability, and support placement assessment from a perspective
• Bachelor's degree in engineering (material/metallurgical, mechanical engineering or related field),
• Fluency in English,

Main Missions

• To be the referent for the piping and layout disciplines of the CPF-2, contribute as a key technical referent for piping within CPF-2
• Contribute to ensuring the compliance of the CPF-2 EPSCC contract piping detailed engineering activities with approved SOR and Company standards
• Liaise with company headquarters for assistance and deviation resolution under the guidance of the PVV Lead, as required
• Participate in the Procurement technical preparation and assist the Procurement discipline during all the procurement phases.
• Attend the FAT and SAT within piping discipline, and contribute to ensuring a clear handover dossier is provided to the site supervision team
• Provide technical advice and support to construction supervision regarding CPF-2 piping
• Comply with HSE requirements and support and enforce the HSE Project objectives and directives
• Participate to tender assessments, clarifications with bidder and other activities as related to the discipline.
• Continuously be involved in identification and technical discussions on project interfaces related to CPF piping
• Perform quality review of detailed engineering documentation related to CPF piping, verifying that comments are returned without delay and with the required quality
• Review and propose responses to technical queries and deviation requests related to CPF piping for PVV Lead and project management approval. Support exchanges with HQ experts for derogation requests related to CPF piping
• Ensure implementation of Pre-Project requirements frozen per SOR and key binding documents related to CPF piping
• Actively expedite Contractors to issue deliverables with the right quality level and as per the approved MDRs. Assess on a regular basis the progress of Contractors' deliverables by reviewing the MDRs.
• Contribute to HQ Project Review preparation and provide input for responses as applicable to CPF piping and layout disciplines.
• Review and comment vendor documents that have been assigned and assist project engineers in technical problem solving at all stages of work. Attend vendor meetings as required.
• Attend weekly coordination meetings with the CONTRACTOR(s) for the piping discipline.
• Report his/her weekly activities performed and attend coordination meetings.

Key Activities

• To adopt & demonstrate an exemplary behavior with regard to HSSE requirements. To contribute to the effective implementation of the Project HSSE policy and commitment.
• To adopt and demonstrate an exemplary behavior with regard to the Company Ethics and "Code of Conduct" policy and to promote and enforce the Corporate Anti-Corruption Program within the project team.
• To provide specialized technical input and support to the PVV discipline team for CPF piping matters
• To support the PVV Lead in overseeing EPC Contractors' performance in piping and layout engineering disciplines: ensuring timely delivery and review of Contractor's engineering documents, studies, and queries through an efficient technical coordination scheme with the Contractors, ensuring full compliance with the project scope and specifications.
• To perform detailed review and validation of FIV and AIV studies performed by EPSCC Contractor and Suppliers
• To ensure adequate and timely reporting to the Piping/Layout lead engineer on progress and concerns, and in a general manner, anticipates problems, proposes potential optimizations, improvements and solutions with regards to his/her disciplines,
• To liaise and interface actively with other CPF-2 discipline specialists regarding the disciplines-related matters and on all engineering, procurement, constructability, operability and maintainability matters, to ensure consistency of the work.
• Review and approve piping material specifications, valve data sheets, and material requisitions in line with project scope and specifications.
• Provide in-depth technical support for material selection involving metallic, nonmetallic (such as, but not limited to GRE, HDPE) piping systems. Deep understanding of GRE piping specific design considerations, analysis methods, and installation requirements, including thermal expansion, joint integrity, and support spacing.
• To be Experienced with other exotic materials or clad piping (if applicable to CPF-2) and their impact on analysis.
• To review and negotiate with the EPSCC and equipment vendors to ensure piping designs meet vendor limits, and to critically assess any proposed deviations or reinforcements.
• Rigorously interpret CAESAR II output reports, identifying potential calculation errors, non-conformances, and assessing the validity of underlying assumptions used by the EPSCC Contractor.
• Critically review and validate the EPSCC Contractor's complex dynamic analysis methodologies, including natural frequency analysis, spectrum analysis (seismic) and time history analysis (blast/water hammer).
• Ensure strict adherence to FIV/AIV guidelines (Energy Institute, GS ECP 103, GS PVV 107) during review, specifically challenging any simplified assessments where a detailed study is technically warranted and required by specifications.
• Collaborate with process, mechanical, and procurement teams to resolve material-related queries.
• Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions
• Support construction and field teams in resolving material deviations and substitution requests

If Interested Kindly apply.

We are looking for an E&I Lead for one of our clients with the following details:

Location: Basrah, Iraq

Start Date: FEB 2026

Contract Duration: 6 months

Scheme: Rotational 28 days ON / 28 days OFF

Qualification and Experience Required:

• We are looking for an experienced E&I Lead in onshore Greenfield and brownfield project with a very good knowledge of company General Specifications, rules, procedures and International Codes and Standards.
• Bachelor's degree in engineering or construction field.
• 10 to 15 years of experience in the oil industry, with significant experience in Construction. Previous experience under SIMOPS works will be considered as a plus.
• Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team.
• Fluent in English, Arabic is a plus

Activities

HSE activities:

• Support and enforce project guidelines, HSE objectives and global improvement (e.g. referential, Golden Rules, reporting, REX, audits, Maestro, trainings, HSE action plans…).
• Responsible for the respect of the HSE Rules and Company Specifications for his activity (also in term of QA & QC)
• Attend HSE meetings and training when necessary.
• Initiate and/or Participate in Job Safety Analysis, make suggestions, stop dangerous situations, and report anomalies and dangerous acts.
• Conduct toolbox talks and enforce safe work practices

Asset Integrity:

• Contributes to the project Asset Integrity initiative by reporting any anomaly, defect, bad practice, lack of equipment, lack of competence that could result in a major HSE incident or loss of production.

Daily Activities and missions:

• Supervise and coordinate construction activities for Electrical and Instrumentation directly with the Contractor.
• Follow up and ensure the selected Contractor's to carry out works in their premises in prefabrication and under construction on the Sites
• Ensure adherence to project specifications, drawings, and quality standards.
• Lead E&I work preparation and execution with Contractor to ensure adequate progress in line with planning and project milestones
• Prepare, Review and validate construction methods and work instructions closely with the construction contractor
• Ensure the proper execution of the works in compliance with safety and environmental protection procedures, technical specifications, budgets, and schedules,
• Check the procedures and task sheets of the Companies, participate, or control the risk analyses, help in the preparation / check the work permits,
• Resolve technical issues on-site in coordination with engineering teams.
• Manage subcontractors and ensure proper allocation of manpower and equipment.
• Optimize and follow up the work schedules, to do this check the good organization of the logistics and the Contractor's site Control material deliveries and verify conformity with project requirements
• Anticipate all potential problems, propose, if necessary, alternative "practical" solutions,
• Organise Pre-commissioning activities, formalize handover dossier to Field Operations, ensure that mark-up documentation is reflecting the site condition and forward those to Engineering.
• Monitor progress and report daily to the Construction Manager
• Maintain good relationships with contractors, displaying flexibility when needed while also enforcing necessary standards.

If Interested Kindly apply.

We are looking for a Project Manager for one of our clients with the following details:

Location: Primarily office based but requires weekly site visits (anywhere in Abu Dhabi) - at least 2 times depending on client requirement- both site and office-based role (depending on project requirement (Site based)

Expected Start Date: ASAP

Contract Duration: Direct Hire

Employment Status: Single status

Work Schedule: As per UAE local regulations - 6 days/48 hrs per week

Qualification and Experience Required:

• Bachelor's Degree in Electrical Engineering from a recognized university.
• PMP certification.
• Minimum of 20 years of experience post-graduation, with at least 15 years of experience as a project manager in OHL, cables, and HV (400kV) substations, and expertise in dealing with power utilities (preferably in the UAE or GCC).
• Experience with Transmission or equivalent in the region is highly desirable.
• Strong track record in basic design and design review.
• Ability to conduct and manage meetings efficiently.
• Fluent in English - reading, writing, and speaking.
• Adequate knowledge of international standards.

Job purpose:

• The Project Manager will lead the owner engineering activities for a major transmission infrastructure project in the UAE and the Middle East. This role requires a deep technical background in power transmission.

Key Responsibilities:

• Lead a portfolio of projects and provide guidance and advice to fellow project managers on project management best practices and standards.
• Ensure compliance with client specifications, relevant standards, and total quality for all contractor activities.
• Monitor the progress of overall projects in terms of cost, planning, quality, and risks.
• Control various site jobs related to protection replacements, ensuring adherence to approved methods, specifications, and agreed time frames, and advising corrective measures if necessary.
• Monitor project safety, health, and environmental aspects regularly, aiming for total safety and environmentally friendly sites with zero man-hour loss.
• Organize and lead design and supervision teams, back-office teams, and site supervision teams to complete work in coordination with engineering and construction managers.
• Contribute to design review duties as required and per technical expertise.
• Communicate with higher officers and clients regarding project progress, deviations, interface points, etc., to ensure client satisfaction.
• Convene project meetings to plan activities, assess progress status, evaluate risks, and resolve issues.
• Certify project completion and claims made by the contractor.
• Ensure compliance and close out comments made by clients on quality, time, safety aspects, etc.
• Produce and manage reports and necessary documentation, keeping records for project activities, progress, non-conformances, remedial actions, follow-up history, near-miss cases, lessons learned, interface cases, etc.

If Interested Kindly apply.

We are looking for a Civil Engineer for one of our clients with the following details:

Location: Saudi Arabia

Expected start date: ASAP

Contract Duration: 2 years

Qualification and Experience Required:

• The engineer shall be a civil engineer with minimum 10 years' experience in 400 kV substation or OHL turnkey installations for similar project in nature and complexity.
• He must have proven record on working on similar projects, both on design and on construction phases.
• He must be able to demonstrate a strong attention to field safety.
• Working language will be English (spoken and written). Speaking Arabic would be appreciated (but not mandatory).

Major Accountabilities and Tasks:

• Supervise the construction and shall make efforts to ensure the expeditious and economical construction thereof in accordance with the terms of the EPC contracts.
• Monitor the EPC contractor in order to ensure quality, safety, schedule and compliance to approved design. He will lead site inspections.
• Detect and anticipate issues/problems at site and suggest solutions in liaise with project management and EPC teams.
• Review and assess contractor's daily report.
• Ensure that the requirements of the construction contract are fully met by the contractor.
• Deliver contractual obligations and supervise the multidisciplinary team of engineers/inspectors, manage project progress, quality of the works, and monitor any changes in the design/construction.
• Establish the site office, identifiy resourcing requirements, organize the Supervision Team and oversee responsibilities of HSE, cost control, supervision and document control procedures.
• Ensure all required permits from all governmental agencies are secured and valid and available on site prior to commencing works.
• Review and implement all relevant project plans including construction programme, QA & QC Plan and organizational chart.
• Evaluate, select, and adopt suitable construction supervision techniques, quality control procedures, and continuous improvement measures.
• Review contractor's submittals including materials, method statements, inspection and test plans, inspection requests, requests for information (RFI) and provides timely responses.
• Review and respond to the change orders and contractor's monthly invoices.
• Coordinate with relevant stakeholders to carry out commissioning activities.
• Interpret drawings, specifications and consult with contractors (if required) to ensure compliance with the program.
• Rectify any errors revealed in the detailed design or the working drawings.
• Supervise inspection, testing and commissioning,
• Oversee site safety, health, and environmental aspects regularly to ensure a safe, environmentally friendly site environment with zero man-hour loss.
• Maintain records of site activities, progress, non-conformities, remedial actions, follow-up history, near-miss cases, lessons learned, and interface cases at the site level.
• Perform site progress meetings and attend monthly meetings if required by the Project Management.
• Certify all report of materials, certify site progress reports, all inspections performed and attended by him or his team at site, joint measurement certificates to certify the progress of works and related invoicing. Acceptance tests and commissioning shall be carried out by the Contractor and shall be supervised by the civil engineer.

If Interested Kindly apply.

We are looking for an NDE Engineer for one of our clients with the following details:

Location: Leatherhead, England

Start Date: 1 March 2026

Contract Duration: 24 months with possibility of 12 months extension

Qualification and Experience Required:

• Professional Experience (years): Minimum 15 years in Oil and Gas projects.

Experience in similar position (years) :

• 10 years of experience, with significant experience as NDE Specialist for Oil & Gas Project
• Previous experience with international Engineering, Procurement, and Construction (EPC) Contractors on projects of similar scale,

Technical Skills :

• Knowledge of design and construction code for structural (such as AWS D1.1), piping (such as ASME B31.3) and pressure vessels (such as ASME BPVC),
• ISO 9712 (or recognized equivalent) Level III UT and minimum Level II RT,
• ISO 9712 (or recognized equivalent) Level III MT and minimum Level II RT,
• ISO 9712 (or equivalent) minimum Level II PT, Level II VT, Radiographic Interpretation, Senior Inspector Certification (type CSWIP 3.2 for instance)

Level / Diploma :

• Bachelor's degree in engineering (material, mechanical engineering or related field),

Languages

• Fluency in English,

Soft Skills

• Strong Communication skills,
• Strong problem-solving and decision-making abilities,
• Ability to work collaboratively in a multicultural environment,
• Ability to lead technical meetings with Contractors/Vendors and challenge them on technical grounds,
• Permanent concern for cost optimization on the GPI / Project activities,
• Attentive to the GPI / Project needs and contribute to its process' improvement,
• Autonomous, proactive and energetic.

Main Missions:

• To adopt and demonstrate exemplary behavior regarding H3SE rules and requirements and ensure their implementation within his/her scope of responsibility,
• The service holder is in charge within the Central Processing Facility (CPF2) Package, under the CPF2 Engineering Manager, of all activities associated with Non-Destructive Examination (NDE),
• The service holder ensures during Detailed Engineering, Procurement and Construction phases that all activities, deliverables and documents (internal and external) related to the disciplines he/she is in charge are timely issued, executed and fit for purpose,
• The service holder ensures Contractor, Subcontractors and Suppliers' deliverables and documents are compliant with applicable codes, standards, Project specifications and best engineering practices related to his/her discipline,
• Within CPF2 Package, the service holder is the Contractor's focal point for all matters related to the disciplines and subjects he/she oversees,
• The service holder participates in the follow-up and supervision of welding qualifications, audits, testing (such as NDE crosschecking, testing/evaluation of NDE operators and equipment's, destructive tests in laboratory etc.), fabrication and construction activities, at Contractor, Subcontractors and Suppliers workshops or worksites, related to his/her discipline, directly and/or with the support of the surveillance and site QC team,
• The service holder will participate in the review and resolution of any discipline-related Technical Query, Deviation Requests and NCR occurring during Detail Engineering and Execution phases,
• The service holder will actively identify the main risks and opportunities related to the disciplines he/she oversees and contribute to their follow-up in line with Project objectives,
• The service holder actively liaises with other specialists of the CPF2 Package to ensure consistency of the works, with the CPF2 Welding Engineer,
• The service holder also liaises with Company HQ discipline specialists as necessary.

Key Activities

• To adhere to Project H3SE and ensure that HSSEQ issues and requirements are correctly handled and met in all the disciplines-related technical documents and construction activities,
• To ensure that safe working practices are used within the Package along all phases of the Project,
• To be informed of disciplines-related Project Specifications and international norms and standards, taking knowledge from them to application to the Project,
• To issue and maintain all the necessary technical documentation related to the disciplines,
• To ensure that contractual scope of work is duly and timely performed by Contractor,
• To ensure daily liaison with Contractor with regards to discipline-related matters and participate in weekly/monthly coordination meetings with Contractor as appropriate,
• To ensure follow-up / review / validation of progress performed by Contractor regarding his/her disciplines and analyses/reports drifts that could occur and propose remedial solutions,
• To supervise and control the Detailed Engineering by timely reviewing the discipline-related documentation issued by Contractor / Subcontractors and Suppliers (NDT procedures, technical documentation, queries, deviation requests etc.),
• To ensure full compliance with Project Specifications, Procedures, international norms and standards with the objective,
• To ensure respect of the schedule and to optimize costs without impacting required level of Quality and Safety,
• To raise consequently necessary comments and highlight unsafe design, deviations, unacceptable / unjustified design choices, constructability/inspectability issues etc.,
• To ensure adequate and timely reporting to the CPF2 Engineering Manager on progress and concerns, and in a general manner, anticipates problems, proposes potential optimizations, improvements and solutions with regards to his/her disciplines,
• To liaise and interface actively with other CPF2 discipline specialists regarding discipline-related matters and on all engineering, procurement, constructability, and operability and maintainability matters, to ensure consistency of the work,
• To suggest, organize, sometime lead and participate in all necessary inspections, including NDE crosschecking, and give advice on the matter with regards to disciplines related matters,
• To attend, when required, to KOM, PIM and any ad-hoc meeting with Contractor, Subcontractors and Suppliers,
• In coordination with the CPF2 Welding Engineer, to assess and follow-up Contractors' welding performance and propose improvement or remedial plan,
• To ensure confidentiality of all the discipline-related documentation produced whatever its support,
• To gather and ensure lesson-learnt ("REX") are considered and participate to the issuance of feed-back for his/her disciplines.

To assist Company Representatives in the supervision of all NDE related activities at fabrication sites, in particular:

• Witness the Non-Destructive Examinations (qualification, production etc.) and destructive tests when needed,
• Assessment and evaluation of NDE technicians, environment and facilities including equipment and specific HSE requirements associated with the activity (radioprotection, chemical waste etc.),

If Interested Kindly apply.

We are looking for a Service Request - Procurement, Logistics and Quality for one of our clients with the following details:

Location: Paris-La Défense, France

Planned Start Date: 16 January 2026

Estimated duration of the mission: +6 months

Objectives and deliverables:

Sales Administration

• Realize customer order fulfillment in accordance with each customer's unique terms and requirements, including incoterms, pre-shipment inspection, etc.
• Monitor manufacturers' stocks or standard ranges, ensuring that holding obligations are respected, particularly for contractual requests for tenders (bi-monthly meeting).
• Edit quotes and invoices for customers
• Edit purchase orders for suppliers
• Monitor and report supplier performance indicators
• Ensure monthly reporting of maritime transport
• As needed, write logistics sheets by country (import procedure, contact list)
• Participate in the definition and updates of the management tools and the database (with the management of the company's migration in SAP)
• Follow up on a monthly basis on the documents exchanged with MS Africa finance

Supply Chain & Logistics

• Manage contract negotiations with freight forwarders and carriers (sea, air or land) in the supply chain.
• Manage the purchasing and supply center of our subsidiaries and B2B customers (quotes, orders, suppliers, freight forwarders, invoicing)
• Organize and monitor the transport and delivery of products in compliance with deadlines.
• Provide support for logistics needs based on RFP-related shipments and B2B or NGO customers.

Quality monitoring

• Send inspection plans with procedures
• Manage defective procedures
• Calculate rates and collect reasons for defective products
• Participate in updates to the quality review document
• Draw up new inspection sheets

If Interested Kindly apply.

We are looking for a Reservoir Engineer II for one of our clients with the following details:

Start date: 01 Feb 2026

Duration: 24 months

Location: Doha Qatar

Qualification and Experience required:

• 6+ years of experience within a subsurface organization
• Minimum requirement of a bachelor's degree, and preferably master's degree (in a RE / PE subject)
• In-depth understanding of Reservoir Management and surveillance processes
• Reservoir and geoscience working experience in an operated asset
• Good experience on reservoir dynamic modelling (Eclipse/IX/Petrel) and model history matching
• Strong communication and collaboration skills
• Detail oriented with bias to action
• Ability to collaborate and influence across multidisciplinary teams
• Strong networking skills externally and internally

Accountabilities

• Identification, planning and close follow-up the reservoir surveillance plans for Kharaib reservoir
• Identification and follow-up of reservoir management activities to maximize production, voidage replacement improvement, and reduce the production decline rates
• Perform simulation and special studies related to well performance improvement initiatives
• Use of segmented well modeling (IX) both 3D and Single Well Models to optimize and design KB wells
• Opportunities identification and maturation to FID (RD Workovers, Tubing Change-outs, Integrity WO, Stimulation...) for production and injection improvements
• Timely generation of monthly unconstrained profiles for short term production forecast (Rolling Forecast)
• New wells and work-overs post-mortem synthesis
• Wells & Well Patterns reviews, and identify remedial actions
• WAG cycles optimization, execution, and follow-up
• Surfactant pilots maturation, execution and monitoring
• Support Profiles and Reserves team by providing data for Integrated Asset Modelling
• Support IRM team for NFA unconstrained profiles aggregation and analysis
• Effective collaboration between KB RMO and company entities (Field Ops, E&C, D&W...)
• Provide support to team members.

Activities

• Perform detailed wells performance analysis and post-mortem synthesis
• Perform subsurface studies to improve production and injection (slugging, NFA decline analysis, stabilization analysis, GL optimization, ..etc)
• Perform simulation studies (IX) to define optimum injection (water and WAG), short term forecasting, and voidage replacement improvement
• Use of simulation and 4D Seismic to identify optimum zonal shifting and injection schemes to increase sweep efficiency
• Segmented well modelling (IX) both in 3D and Single Well Models to optimize and design complex wells
• Identify and prioritize reservoir surveillance plans, and ensure close follow-up
• Identify opportunities, ranking and maturation (Re-Drills, Workovers, Stimulation, ..etc) until FID
• Lead light workovers maturation (tubing change-out) until final SOR
• Maintain and close follow-up of opportunities hopper
• Support WAG cycles optimization, execution and follow-up
• Support the maturation of Surfactant pilots, execution and follow-up
• Contribute to the generation of the yearly reservoir management plans and ensure their execution
• Prepare and present the Quarterly Reservoir Management reviews to SH's
• Perform decline curve analysis and generate the monthly unconstrained profiles for the rolling forecast
• Define completion strategies for future wells supported by simulation studies and 4D seismic
• Support the New Well Delivery team all along the WO's SOR process.

If you are interested, kindly apply!

We are looking for a Telecom Engineer for one of our clients with the following details:

Location: local UK resident, with missions in Iraq

Start Date: 1 March 2026

Contract Duration: 24 months, extendable

Scheme: resident

Qualification and Experience Required:

• 10-15 years in Oil and Gas projects as Telecom Lead/Sr Telecom engineer, Lead/Sr Telecom engineer
• Previous experience with international Engineering EPC Contractors on projects of similar scale,
• Previous experience with Brownfield engineering and execution is desired.
• Possess competence in accordance with global Telecommunications Engineering competency and development framework
• Conversant with relevant Telecommunications national and international standards and has a broad understanding of all aspects of Telecommunications systems and a deep understanding of own speciality(ies).
• Proven track records of delivering a portfolio of Telecom EPC projects including complex and multiple vendor projects within international settings.
• Requires hands on expertise and design experience with telecoms equipment and systems design (OTN, UHF TETRA VHF radio Systems, IP Networks), security (access control, CCTV surveillance networks, fence intruder detection, ANPR), public/emergency announcement (PAGA), and networks (WANs, LANs, Industrial Wireless Networks Wiring, Routers, Switches, Servers etc), ship/shore communication systems, Hazardous area requirements (EExd, EEi, EExe).
• Shall be proficient in fibre optic cabling network design, copper cable networks and relevant infrastructure such as duct banks, cable / ladder tray designs. This shall include transition of design engineering to construction deliverables.
• Bachelor's Degree in Computer Science/Engineering, Electrical and Electronics Engineering or System Engineering Languages
• Fluency in English

Main Missions

• Contribute to ensuring the compliance of the CPF-2 EPSCC contract Telecom detailed engineering activities with approved SOR and Company standards
• Liaise with company headquarters for assistance and deviation resolution under the guidance of the ICSS Lead, as required
• Participate in the Procurement technical preparation and assist the Procurement discipline during all the procurement phases.
• Attend the FAT and SAT within Telecom discipline, and contribute to ensuring a clear handover dossier is provided to the site supervision team
• Provide technical advice and support to construction supervision regarding CPF-2 Telecom
• Comply with HSE requirements and support and enforce the HSE Project objectives and directives
• Participate to tender assessments, clarifications with bidder and other activities as related to the discipline.
• Continuously be involved in identification and technical discussions on AGUP interfaces related to CPF Telecom
• Perform quality review of detailed engineering documentation related to CPF Telecom, verifying that comments are returned without delay and with the required quality
• Review and propose responses to technical queries and deviation requests related to CPF Telecom and project management approval. Support exchanges with HQ experts for derogation requests related to CPF Telecom
• Ensure implementation of Pre-Project requirements frozen per SOR and key binding documents related to CPF Telecom
• Actively expedite Contractors to issue deliverables with the right quality level and as per the approved MDRs. Assess on a regular basis the progress of Contractors' deliverables by reviewing the MDRs.
• Contribute to HQ Project Review preparation and provide input for responses as applicable to CPF Telecom and layout disciplines.
• Review and comment vendor documents that have been assigned and assist project engineers in technical problem solving at all stages of work. Attend vendor meetings as required.
• Attend weekly coordination meetings with the CONTRACTOR(s) for the Telecom discipline.
• Report his/her weekly activities performed and attend coordination meetings.

Key Activities

• To adopt & demonstrate an exemplary behavior with regard to HSSE requirements. To contribute to the effective implementation of the Project HSSE policy and commitment.
• To adopt and demonstrate an exemplary behavior with regard to the Company Ethics and "Code of Conduct" policy and to promote and enforce the Corporate Anti-Corruption Program within the project team.
• To provide specialized technical input and support to the Engineering all discipline team for CPF Telecom matters
• To ensure adequate and timely reporting to the ICSS lead engineer on progress and concerns, and in a general manner, anticipates problems, proposes potential optimizations, improvements and solutions with regards to his/her disciplines,
• To liaise and interface actively with other CPF-2 discipline specialists regarding the disciplines-related matters and on all engineering, procurement, constructability, operability and maintainability matters, to ensure consistency of the work.
• Review and approve Telecom material specifications, valve data sheets, and material requisitions in line with project scope and specifications.
• Service conditions
• Support construction and field teams in resolving material deviations and substitution requests
• Ensure telecoms engineering activities are conducted in accordance with project specifications and approved variations if any. Accountable for a quality design of telecoms engineering deliverables, including design safety aspects and execution planningof telecoms field activities
• Lead work execution, ensuring technical alignment and quality with various disciplines stakeholders from both PMT and EPC Contractor. Provides guidance to EPC contractor to complete Telecom design as per project specifications in a timely manner and provide clear direction when project instructions or specifications are not clear
• Manage the purchase order with the EPC Contractor and System Vendors in accordance with the roles and responsibilities given in the contract to ensure safe and seamless integration of the systems without any disturbance to the existing operating facilities.
• Lead the Contractor to develop plans and work schedules that ensure effective completion of project activities and provide data (narrative, charts, graphs), change management recommendations and recovery plans to address any schedule delays for monthly progress and stewardship reporting.
• Support multi-discipline activities providing telecommunications expertise to other disciplines as necessary, in support of completing activities within schedule and making appropriate recommendations to management on telecommunications issues.
• Support interfacing between key vendors and other EPC contractors to ensure quality and execution objectives are met.
• Provides field engineering support to construction and commissioning works to ensure field execution at site meets project plans.

If Interested Kindly apply.